Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

4 article(s) in your cart
pos.	image	product	Configure	Actions
1		ÜTA-32
2		TPS-Serie
3		ZT Serie
4		T204-0

ÜTA-32 configure

1 Float

2 Guide-rod

3 Length

Amount

additional infomation

ÜTA-32

Overfuelling indicator

The top-mounted tank indicator is a mechanically operated, on-the-spot indicator. The liquid level in the tank located below the indicator is determined proportionately to the filling level and is indicated. Control of the level is easily achieved through the installation of switching contacts. The switching points for level control can be steplessly adjusted, on-the-spot and at any time.

Properties

connection : G 1” (andere Gewinde auf Anfrage)
max.length guide tube : siehe Diagramm
Operating temperature : atmosphär. Bedingungen
Operating pressure : atmosphär. Bedingungen
media density : siehe Eintauchtiefe
Number of contacts : beliebig
Contact load : max. 10 VA, max. 230 V AC
Length : max. 1750 mm

Material

Sight tube : PVC transparent
connection : PVC-Verschraubung mit PTFE-Stangenführung
Guide rod : Edelstahl, Titan, Hastelloy B, Hastelloy C oder PVCRohr
float : PE / PP

TPS-Serie

Sensors for determining the dew point in a wide range of applications

The dew point sensors of the enable direct measurement of the dew point and ambient temperature indoors and outdoors.

Operating conditions

Temperature: : -40...80°C
rel. Humidity : 0 - 100% rH

Measuring range

measuring range (dew point) : -50...+80°C
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V oder 4...20mA

ZT Serie

Reliable pressure measurement and optimum process monitoring with the ZT series

From low to high pressure and suitable for liquid and gaseous media.

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

T204-0

Magnetic immersion probe made of stainless steel (1.4571) as a cable tail variant

For use with highly aggressive liquid media to detect level limit values in containers. Suitable for use in hazardous areas, zone 0 (category 1).

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil