Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

42 article(s) in your cart
pos.	image	product	Configure	Actions
1		cIO CANopen Module
2		MO
3		ÜTA-32
4		T200
5		TK-301
6		BK-380
7		ES-21
8		LU-1X0
9		ES-Serie
10		Ex-BK
11		DSM2420
12		T-20x.F 230V
13		T202
14		ZT-F
15		Fluidix Lub-VDT
16		FDL400
17		ViscoScope® VA-300
18		Aero_aH100
19		ZDT-H
20		ZS-Serie
21		T-200.L
22		XR-4x2
23		T204
24		T205-0
25		W-35X
26		EF2X
27		EK-CAN
28		TK-313
29		NP-256
30		T205 PP
31		TK-307
32		ER-104
33		T201 PTFE
34		TK-101
35		TPS-410 TPS-420
36		XR Relais
37		T201
38		TK-308
39		T200.F
40		TRM-100
41		ZMF-203e-IR
42		EF2…5 24V

MO configure

1 Kontaktart

2 Kabelart

3 Kabellänge

4 Befestigung

Amount

additional infomation

ÜTA-32 configure

1 Float

2 Guide-rod

3 Length

Amount

additional infomation

TK-301 configure

1 Material Rohr und Verschraubung

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

BK-380 configure

1 Kontakt

2 Stecker

Amount

additional infomation

ES-21 configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

additional infomation

LU-1X0 configure

1 Typ

Amount

additional infomation

ES-Serie configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

additional infomation

Ex-BK configure

1 Ex

Amount

additional infomation

T-20x.F 230V configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schwimmermaterial

7 Anschluss-Elektronikteil

8 Länge

Amount

additional infomation

ZT-F configure

1 Measuring Range

2 Output Signal

3 Electrical connection

4 Process connection

Amount

additional infomation

Fluidix Lub-VDT configure

1 Signalausgang

2 Messbereich

Amount

additional infomation

ViscoScope® VA-300 configure

1 Viscosity

2 Temperature

3 Process-Connection

4 Material

5 Non-active-Extension

6 Ex-Bereich

Amount

additional infomation

XR-4x2 configure

1 Kanalanzahl

2 WHG

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Empfindlichkeitsbereich

7 Versorgungsspannung

8 Busanschluss

9 SIL

10 ATEX

Amount

additional infomation

W-35X configure

1 Anschlussmaterial

2 Rohrmaterial

3 Flanschgröße

4 Mittenentfernung

Amount

additional infomation

EF2X configure

1 Typ

2 Anschluss

3 Rohrmaterial und Anschlußkopf

4 Stabmaterial

5 Elektronikteil

Amount

additional infomation

TK-313 configure

1 Gehäuse

2 Eingang

Amount

additional infomation

NP-256 configure

1 Ausführung

2 Staurohr-Anzahl

3 Anschlussgewinde

4 Druckschalter

5 Kontakt

6 Längen

Amount

additional infomation

TK-307 configure

1 Anschluss

2 Rohrlänge

3 Auflösung

4 Zubehör

Amount

additional infomation

TK-101 configure

1 ATEX

Amount

additional infomation

TPS-410 TPS-420 configure

1 Ausgangssignal

2 Gehäuse

Amount

additional infomation

XR Relais configure

1 Kanalanzahl

2 WHG

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Versorgungsspannung

7 Busanschluss

8 SIL

9 ATEX

Amount

additional infomation

TK-308 configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

TRM-100 configure

1 Material

2 Measuringrange

3 Connection

4 Flange

5 Sealing

Amount

additional infomation

ZMF-203e-IR configure

1 Typ

2 Temperaturbereich

3 Messmethode

4 Signalausgang

5 Messbereich

6 Ex-Zulassung

Amount

additional infomation

EF2…5 24V configure

1 Sicherheitsfunktion

2 Elektrodenanzahl

3 Verschraubungsmaterial

4 Stabmaterial

5 Stabdurchmesser

6 Elektrodenbeschichtung

7 Anschlussgewinde

8 Kabelbruchwiderstand

9 Auswerteelektronik

10 Stablänge

11 SIL

Amount

additional infomation

cIO CANopen Module

Compact I/O modules for DIN rail mounting

product series of compact CANopen I/O modules with various electrical connections

Properties

Housing : Kunststoffgehäuse*
Dimensions (LxBxH) : 18 x 90 x 62 mm
Internal circuits : Ausgangsschutzschaltungen gegen Überspannung und elektrostasche Entladung
Fieldbus and I/O level : getrennt durch galvanische Trennung
ltdata.*zumAufrastenaufDIN-Trageschienen :

ElectricalConnection

Operating voltage : 11...32V DC (typ. 24V DC)
Operating temperature : 0...+55 °C
Operating temperature : optional -40...+70 °C
Conductor cross-section : 0,08...1,5 mm² (AWG28...AWG14)

CAN bus properties

baud rate (max.) : 1 MBit
ciA Standards : Ds301 Version 4.2 & DS401 Version 3.0
ISO standards : ISO11898 (+ Transceiver TJA1050)
PDO : siehe Dokumente

MO

Monostable Switch

Properties

Protection class : IP 65
Switching current : max. 1 A
Switching voltage : max. 24 V
Switching capacity : max. 20 W/VA

Material

Housing : Messingrohr Ø 10 x 1
Cable : TPK (PVC basis) | SIL (Silikon)

Operating temperature

TKP : –15 ° ... + 60 °C
SIL : –15 ° ... +130 °C

ÜTA-32

Overfuelling indicator

The top-mounted tank indicator is a mechanically operated, on-the-spot indicator. The liquid level in the tank located below the indicator is determined proportionately to the filling level and is indicated. Control of the level is easily achieved through the installation of switching contacts. The switching points for level control can be steplessly adjusted, on-the-spot and at any time.

Properties

connection : G 1” (andere Gewinde auf Anfrage)
max.length guide tube : siehe Diagramm
Operating temperature : atmosphär. Bedingungen
Operating pressure : atmosphär. Bedingungen
media density : siehe Eintauchtiefe
Number of contacts : beliebig
Contact load : max. 10 VA, max. 230 V AC
Length : max. 1750 mm

Material

Sight tube : PVC transparent
connection : PVC-Verschraubung mit PTFE-Stangenführung
Guide rod : Edelstahl, Titan, Hastelloy B, Hastelloy C oder PVCRohr
float : PE / PP

T200

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

TK-301

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 05 (06)
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Operating pressure : max. 20 bar
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm| 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 05 : 0,81 g/cm³
Type 06 : 0,67 g/cm³

BK-380

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –25...+70 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm

Material

Housing : Polycarbonat
Mounting clip : V2A, Kabelbinder (PP)
Rivet : V2A
Screw connection : M 20 x 1.5, Polyamid

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 5...250 V AC/DC
Switching current : 1mA...6 A AC/DC
Switching capacity(min.) : 300 VA, 60 W
Switching capacity(max.) : 5 mW

ES-21

Electronic safety switching device with 1 safety function

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

LU-1X0

Compact Ultrasonic Level Sensor

The LU-150 is a short-range integrated ultrasonic level transmitter, intrinsically safe as Ex-version LU-180. This general purpose, 2 wire, 4 to 20 mA loop powered transmitter is ideal for liquids, slurries, and bulk materials in open or closed vessels to 5 m (16.4 ft).

Properties

Protection class EN60529 : IP 68
Power supply : 12...30 V DC / 0.1A Spitze
Power consumption : Max. 0,75 W (25 mA bei 24 V DC)
Output : 4...20 mA
Max. Load : 600 Ω bei 24 V DC
Measuring span : Proportional oder umgekehrt proportional
Measurable materials : Flüssigkeiten, Schlämme, Schuttgüter
operating temperature : –20...+60 °C
Opening angle : 12°
working pressure : Atmosphärisch
Display : 3-stelliges LCD
Process connection : Gewinde G 2" (BSPP) EN 10226 PVDF
Weight : 1,3 Kg
Cable entry : Kabelverschraubung M 20 x 1.5
Material housing electronics : Polybutylenterephthalat PBT
Material sensor / thread : PVDF-Copolymer

Input

Measuring range : 0,25...5,0 m
frequency : 54 kHz

Measuring Accuracy

Measurement deviation : ± 0,25 % vom Messbereich (in Luft)
Resolution : 3 mm
Temperature compensation : im Sensor integriert
Echo processing : „Sonic Intelligence“ von Siemens

ES-Serie

electronic safety switching device

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

Ex-BK

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –20...+120 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm
Dimensions : 80 mm x 75 mm x 57 mm

Material

Housing : Aluminium
Mounting clip : V2A
Rivet : V2A
Screw connection : M 20 x 1.5, V2A

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 24...250 V AC/DC
Switching current : 20 mA...6 A AC/DC
Switching capacity(min.) : max. 500 VA, 60 W
Switching capacity(max.) : min. 2 VA/W

DSM2420

Sensor for simultaneous measuring flow velocity and filling level

The DSM2420 sensor is a combined sensor for simultaneous measuring flow velocity and level in open or accessible closed channels of all types and shapes.

Properties

Dimensions : 180 x 48 x 36,5 mm ( L x B x H )
Weight : ca. 1,5 kg
Protection class : IP68
Cable length (standard) : 15 m
Bending radius : > 10 x D (Kabeldurchmesser 6,25mm) = > 62,5mm
Temperature range : 0°C ... 50°C
Mounting shoe material : V2A 1,5mm

Certificates

EX / ATEX : IBExU 04 ATEX 1256

Measuring principle

Flow velocity: Ultrasonic Doppler :
Filling level: Differential pressure :

Flow velocity

Measuring range : 0,01 - 4 m / s
Measuring accuracy : +/- 5 % vom Momentanwert im Kanal
Temperature drift : 0,1% / °C ( Meßspanne )
Temperature drift : 0,05% / °C ( Nullpunkt )
Output signal : 4 - 20 mA

Filling level

Measuring ranges : 0 –1 m ; 0 – 2 m ; 0 – 4 m
Measuring accuracy : < 0,2% v.E. Summe aus Nichtlinearität, Hysterese und Wiederholbarkeit
Temperature drift : 0,005% / °C v.E. Meßspanne
Temperature drift : 0,005% / °C v.E. Nullpunkt
Material : Al2O3 (96%) aktive Fläche
Output signal : 4 – 20 mA
Zero point : norm 4 mA ( +/- 3 % )

T-20x.F 230V

Overfill protection for containers

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection

Box : Polyester

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating temperature : max. 80°C
Operating pressure : atmosphärisch
media density : ρ ≥ 0,6 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Power supply

nominal voltage : 24…230 V AC/DC
Power consumption : ≤ 2 W

Output

Output contact : 2 potentialfreie Wechselkontakte
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 5 A AC / 5 A DC
Switching capacity : max. 750 VA / 90 W
displays : Betriebs-LED grün, Funktions-LED rot
Switching delay : ca. 0,5 s Anzug/Abfall
CE marking : siehe Konformitätserklärung

T202

Immersible Magnetic Probe made of stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ZT-F

Reliable OEM pressure sensor with many customisation options (0...0,6 to 0…1.000 bar)

Can be used with all media and applications compatible with stainless steel

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

Fluidix Lub-VDT

Oil condition sensor for permanent monitoring of mechanical properties of liquids

The FluidIX Lub-VDT enables inline monitoring of mechanical fluid properties.

Properties

CE marking : EN 61000-6-1/2/3/4
Operating voltage : 9...32 V DC
Housing material : Edelstahl
Protection class : IP 67
Dimensions : 30x90 mm
Process connection : G 3/8"
Electrical connection : M12-8 A-Coding
Weight : 150g
Measurement output : 2x 4...20mA
bus protocol : ModbusRTU, CANopen

Measured variables

Resonator frequency : 20...25 kHz
Viscosity : 1-650 cSt (mm²/s)
density : 0.5-1.5 g/cm³
Temperature : -40...+125°C
sampling rate : 1/s

Operating conditions

Temperature of the fluid : -40...+125°C
Housing temperature : -40...+100°C
oil pressure : Max. 50 bar
particle size : 250 μm

FDL400

Flow Data Logger

The FDL400 "Flow Data Logger 400" measuring device is suitable for measuring the flow of water and wastewater in fully or partially filled sewers or pipes of various geometries.

Properties

Housing : Aluminium
Protection class : IP30
Dimensions : 197 x 153 x 37,5mm (B x H x T)
Temperature range : 0 – 50°C
Supply voltage : 24V DC +/-20%
Power consumption : 120mA – 220mA
Reverse polarity protection : ✓
Display : 4x20

Outputs

analog 0(4)–20mA : 3x
digital : 4x
fixed for alarm : 1x
free configurable : 3x

display of measured value

Flow velocity :
Filling level :
flow :
flow rate :

ViscoScope® VA-300

Maintenance-free inline process viscometer for real-time viscosity measurement

The ViscoScope® sensors are made of high-quality, first-class stainless steel and impress with their intelligent, robust design.

Properties

Protection class : IP65
Material : 1.4571 / 1.4404 (316Ti / 316L)
Process temperature : -40°C … +450°C
Process pressure : Vakuum ... 450 bar
Process connections : DIN Flansch | ANSI Flansch | NPT | Varivent® | Tri-Clamp
Cable length sensor - transmitter : max. 1.000m
max. flow velocity : 10 m / sec
Ex approval : (optional) II 1/2G Ex ia IIC T6...T3 Ga/Gb
Material (optional) : Hastelloy C22, Duplex 2205, Teflon

Sensor types

big cylinder : VA-300L
small cylinder : VA-300M
Sphere : VA-300H
small sphere : VA-300X

Measuring range

VA-300L : 0,1 - 2.500 mPa·s x g/cm³
VA-300M : 1 - 25.000 mPa·s x g/cm³
VA-300H : 0,01...250 Pa·s x g/cm³
VA-300X : 0,1...2.500 Pa·s x g/cm³

Probe dimensions

VA-300L : Ø 32 x 190 mm
VA-300M : Ø 32 x 165 mm
VA-300H : Ø 32 x 130 mm
VA-300X : Ø 19 x 115 mm

Aero_aH100

Exhaust air fan with integrated dehumidification control for automatic room dehumidification

Dehumidification control, including integrated indoor and outdoor climate sensor. Controlled dehumidification takes place by comparing the indoor and outdoor climate. To support room dehumidification, a ventilation fan can be directly connected and controlled via the Aero_aH 100.

Properties

Power supply : 230V~ 50Hz
power consumption : 8 W
Protection class : IPX4
flow rate : 78 m³/h bis zu 92 m³/h
color : verkehrsweiß, ähnlich RAL 9016
Material : Kunststoff
Noise level : 27 dB(A) / 32 dB(A)
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100% rF
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C

ZDT-H

Differential pressure transmitter for high pressure applications

Versatile and reliable differential pressure transmitter for measuring air, non-aggressive media as well as liquids and oils.

Properties

Pressure type : Differenzdruck
Housing : Kunststoff mit LCD-Anzeige (oponal)
Overpressure : 1,2* (1,5*) x Nenndruck

Measurement parameters

Total error : ± 2,5 % FS (typ. ± 0,5 %)
Linearity error : ± 1 % FS
Signal output selection : 0...10 V 4...20 mA, 2-Leiter 4...20 mA, 3-Leiter
Pressure range : 5…1.000 bar

Operating conditions

Operating voltage : 14...28 VDC ± 10 %
Operating temperature : 0...+50 °C
Storage temperature : -20°C...+120°C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : G1/4" (andere auf Anfrage)

ZS-Serie

Differential pressure sensor for low pressure

Compact and robust differential pressure transmitter for measurement on air and other non-aggressive media

Properties

Pressure type : Differenzdruck
Housing : Aluminium
medium : Luft und nicht aggressive Gase

Measurement parameters

response time : < 2,5 s
Hysteresis : 0,1 %
Overload capacity : 4* fach bis 500 mbar, darüber 2* fach
Signal output selection : 0...10 V | 4...20 mA, 2-Leiter

Operating conditions

Operating voltage : 24 VDC/AC ±10 % (0...10 V) | 15...30 VDC (4...20 mA)
Operating temperature : -20...+50 °C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 4 mm oder 6 mm
Cable gland : PG 7

T-200.L

Leakage probes with general building authority approval

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

XR-4x2

Electrode relay with ATEX and WHG approval

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V, max. 250 V AC / 150 V DC
Switching current : min. 5 mA, max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW, max.100 VA / max. 50 W
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Baumusterprüfbescheinigung
Weight : ca. 170 g

T204

Magnetic immersion probe made of stainless steel (1.4571)

For use with highly aggressive liquid media to detect level limit values in containers. Suitable for use in hazardous areas, zone 0 (category 1).

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
connection thread : G1 1/2" | G2"
Sliding tube length : max. 6000 mm (Rohr Ø 12 mm)
Operating pressure : max. 20 bar (Kugel) | max. 15 bar (Zylinder)
Operating temperature : max. 135 °C
Number of floats : max. 4

Float type

Stainless steel ball 52mm ⌀ : Dichte: 0,75 g/cm³ | mind. Kontaktabstand: 75 mm
Stainless steel ball 62mm ⌀ : Dichte: 0,65 g/cm³ | mind. Kontaktabstand: 85 mm
Stainless steel cylinder 44 mm Ø : Dichte: 0,76 g/cm³ | mind. Kontaktabstand: 75 mm

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 4
normally open : 6
Normally closed contact : 4

T205-0

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 68 Kabel
Float type : max. 4x Zylinder Edelstahl 27 mm Ø
connection cable : 1000 mm PUR Blau
Sliding tube length : max. 6000 mm
Operating temperature : max. 120 °C
Operating pressure : max. 10 bar (Schwimmer)
media density : 0,78 g/cm³
Number of contacts : max. 2 Schließer / 2 Öffner
Switching current : 1A, 2A
Switching capacity : 50 W/VA
min. contact distance with several floats : 50 mm

W-35X

Water Level Gauge with sight glass indicator

The water level gauge is particulary suitable for all liquid media which are aggressively hot and rapidly moved in a container, but are not too much contamined.

Properties

Tank connection : Flansch ab DN 25 oder Verschraubung ab G ½"
Material Float : PPH max. 2,5 bar, Glas max. 10 bar
cable length : bei monostabilem Kontakt: Standard 2 m
Number of contacts : beliebig
Contact distance : min. 10 mm
Temperature of the fluid : mit Plexiglasrohr max. +70 °C
media density : ρ ≥ 0,95 g/cm³ | ρ ≥ 0,85 g/cm³ (auf Wunsch)

Properties W-350

Material tube sight glass : transparentes PVC
Temperature of the fluid : max. +60 °C
Operating pressure : max. 2,5 bar
Material flange : PVC
Material connection with angle valve : PVC
Material sealing ring : Gummi

Properties W-351

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Rotguss
Material connection with angle valve : Rotguss
Material sealing ring : Silikon
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-352

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4571 als Bogen 90°
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-353

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4401
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

EF2X

Double pipe and filling pipe monitoring

EF2L and EF2T -conductive- with general technical approval for construction Z-65.13-405

Properties

Electrical connection : Stecker GDM
Protection class EN60529 : IP 65 mit Dichtung
connection : PVC Überwurfmutter G 1 ¼“
PVC : max. +60 °C
PE : max. +80 °C
Storage temperature : -30...+85 °C
Operating pressure : max. 6 bar

Material

Pipe : PVC | PE
Sensor rods : Edelstahl 1.4571 | Hastelloy B/C | Titan | Tantal

tdata.ElektronikteilET-473L|ET-473T

nominal voltage : 20...30 V DC
Power consumption : 1 VA
Output contact : Schließer | Öffnerkontakt (NO/NC) (nicht potentialfrei)
Switching voltage : 12...30 V DC
Switching current : max. 300 mA
Switching capacity : max. 9 W
Sensitivity range : 2...30 kOhm
ltdata. :

EK-CAN

PC program for CANopen sensors

Evaluation and configuration software for Fluid.iO CANopen sensors

Properties

Operating system : tba.
available disc space : tba.
scrren resolution : tba.
softwatre architecture : tba.
software type : tba.
installation type : tba.

TK-313

Evaluation unit with 2 change over limit contacts

The TK-313 limit comparator can be used in conjunction with our TK-30... continuous level sensors with 0(4)...20 mA or 0...10 V output signal for level control / measurement.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
nominal voltage : 24... 230 V AC/DC
Power consumption : 2 VA
Dimensions housing type B : 22,5 x 114,5 x 99
Dimensions housing type C : 22,5 x 114,5 x 114

Input

power : 0/4...20 mA
Voltage : 0...10 V
Resistance in three-wire circuit RG : 0–4...10 kΩ

Output

Output contacts : 2 Wechselkontakte
Switching voltage : max. 250 V AC
Switching current : max. 3 A
Switching capacity : max. 500 VA
Temperature influence tolerance : max. ± 0,6 % der Signalspanne
Mounting : Tragschiene nach EN 50022
Current output : 4...20 mA bezogen auf die Masse des Eingangs
Display (%) : 2-stellig, 7-Segment
Weight : 175 g
ltdata. :

NP-256

Level Switch - multiple 2...4 - pneumatic (hose)

very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated

Properties

Protection class EN60529 : IP 54
connection thread : ab G2”
Union nut : ab G2¾”
Container connection flange : ab DN 25
HoseØ : 13x2 mm
Operating temperature : +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching capacity : 500 VA
Switch-on point (Viton membrane) : 150 mm WS ±30 mm
Switch-off point (MembraneViton) : 90 mm WS ±30 mm

Material

Hose : PVC
Screw fitting/grommet : PVC
flange : PVC
Connection head : PVC

Switching voltage

silver : max. 250 V AC
Gold : max. 24 V AC

Switching current

silver : max. 6 A
Gold : max. 100 mA

T205 PP

Magnetic immersion probes made of PP

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 65
Number of floats : 1x Typ 12 | 1x Typ 13
connection cable : LiYY-Kabel 0,14 mm² | PVC-Litze 0,24 mm²
Operating temperature : max. 60 °C
Operating pressure : drucklos
Number of contacts : 1x Schließer / Öffner
Switching current : 1 A
Switching voltage : 250 V AC
Switching capacity : 50 W/VA

Float type

Type 12 : Zylinder PP 19 mm Ø | Dichte 0,93 g/cm³
Type 13 : Zylinder PP 25 mm Ø | 0,68 g/cm³

TK-307

Stainless steel level sensor

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Connection housing : Aluminium H 30 mm x B 50 mm x T 45 mm
Connection socket : Polyester H 55 mm x B 80 mm x T 45 mm
Protection class socket / plug : IP 65
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Resolution depending on type : 7,5 mm | 10 mm | 15 mm | 20 mm | 1% | 2% | 5%
Mounting : 2 Schlauchschellen
Accessories : R/I-Wandler TK-101

ER-104

1-channel electrode relay

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
Storage temperature : –30...+80 °C
Weight : ca. 150g
ltdata. :

Power supply

nominal voltage : siehe Typenschlüssel
AC nominal frequency : 48...62 Hz
Power consumption : max. 1 W / VA

Input

Open circuit voltage : ≤ 10 V AC
Short-circuit current : ≤ 5 mA
Switching delay : siehe Typenschlüssel
Sensitivity range : siehe Typenschlüssel

Output

Contacts : potentialfreie Wechselkontakte
Switching voltage(min) : 5 V
Switching voltage (max) : 250 V AC / 150 V DC
Overvoltage category : EN 61010-1 Kategorie III

Switching current

Switching current : min. 5 mA
Switching current : max. cos φ =1 5 A
Switching current : max. cos φ = 0,7 3 A/AC
Switching current : max. cos φ = 1

T201 PTFE

Immersible Magnetic Probe made of PTFE

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

TK-101

Measuring transducer (R/I-transducer)

The measuring transducer Tk101 and Tk101Ex are built directly into the connection boxes of our Liquid Level Measuring Instruments of type TK-30.

Properties

Operating temperature : -20...+60 °C
Storage temperature : -40...+80 °C
Ex-protection : siehe Zertifikat
CE marking : siehe Konformitätserklärung

Input

Resistance range in three-wire circuit : 4...10 kΩ
Measuring current : 0,8 mA @ RE = 4 kΩ
Measuring current : 0,33 mA bei RE = 10 kΩ
Measuring voltage : 3,3 V

Supply/Output

2-wire : 4...20 mA
Voltage(Um) : 11...28 V DC
Burden / load : 0...800 Ω |RBürde max = [(Um - Um min) / 0,02] Ω
Output signal in case of error : max. 24 mA

Fault influences

Max. Total error : ± 1 %
Temperature influence : -0,015 % / °C
Supply voltage influence : 0,025 % / V

Setting range

Full deflection : 60...105 %
Zero point adjustment : 0...25 %

TPS-410 TPS-420

Compact, analogue dew point sensor

The dew point sensors of the enable direct measurement of the dew point and ambient temperature indoors and outdoors.

Properties TPS-410

Operating voltage : 12...30V DC
Power consumption : < 15mA
Protection class Housing : IP66
Protection class plug : IP67
Weight : 96g

Properties TPS-420

Operating voltage : 24V DC
Loop voltage min: : Bürde(Ohm) *0,02 + 8 V
Loop voltage max: : 30V

General properties

Housing : Aluminium, eloxiert
Dimensions (in mm) : 135 x Ø 19,2

Measuring range

measuring range (dew point) : -50…+80 °C
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V | 4...20mA

XR Relais

Electrode relays and contact protection relays

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised. The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Weight : ca. 170g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

T201

Immersible Magnetic Probe made of stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

TK-308

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 11,12, 15, 17
connection cable : 1000 mm LiYY 0,5 mm² oder Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating pressure : max. 6 bar
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

Operating temperature

PVC : max. 60 °C
PE : max. 80 °C
PP : max. 90 °C

MaterialDensity

Type 11 : 0,60 g/cm³
Type 12 : 1,00 g/cm³
Type 15 : 0,59 g/cm³
Type 17 : 0,63 g/cm³

T200.F

Overfill protection for containers

Connection

Polyester junction box :
Aluminum housing :
Polyethylene connection head :
Cable :
Plug :

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating pressure : Max. 20 bar
media density : ρ ≥ 0,6 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm
Operating temperature : atmosphärisch
PP : max. 90°C

Resistance value

Operational readiness : ca. 1 kΩ
overfill alarm : ca. 12 kΩ
Switching time : ca. 20 ms
ltdata. :

TRM-100

Turbidimeter (0...1.000 FNU or 500...4.000 FAU)

The turbidimeter TRM-100 is a compact device for measuring turbidity in liquids. The "turbidity" is measured using the scattered light method (angle 90 degrees) for the turbidity range of < 1,000 FNU (Formazine Nephelometric Units) and the transmitted light method (angle 0 degrees) for the turbidity ranges > 1,000 FAU (Formazine Attenuation Units).

Properties