Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

56 article(s) in your cart
pos.	image	product	Configure	Actions
1		T207
2		T205-0
3		KS-Serie
4		cIO CANopen Module
5		ÜTA-32
6		MTA
7		T201
8		ER-104
9		EF2X
10		T209
11		T200
12		T204
13		ZDT-H
14		TK-307
15		ER-214
16		ZT-N
17		MKL
18		T-200.L
19		EK-CAN
20		PPS-390
21		KG-2XX
22		KS-CAN-03
23		TK-315
24		TK-301
25		ZS-Serie
26		QFS-5x \| QFS-6x
27		T202
28		TK-313
29		BI
30		QFS-3X
31		ZS-2
32		PVS-390
33		NP-255
34		ER-Serie
35		Fluidix Lub-VDT
36		XR Relais
37		KST-20 Vento
38		T-200.L 230V
39		PVG-399
40		KS-17
41		EE-2XF
42		NP-256
43		TK-303
44		ES-22
45		W-35X
46		ZDT-Serie
47		T200.F-24V
48		ViscoScope® VA-300
49		BK-3X0
50		QFSK-2X
51		ES-21
52		ZMF-200e-IR
53		T205 PP
54		TK-101
55		T204.F
56		ZT-F

ÜTA-32 configure

1 Float

2 Guide-rod

3 Length

Amount

additional infomation

MTA configure

1 Außendurchmesser

2 Seilsicherung

3 Seil

4 Schwimmer

Amount

additional infomation

EF2X configure

1 Typ

2 Anschluss

3 Rohrmaterial und Anschlußkopf

4 Stabmaterial

5 Elektronikteil

Amount

additional infomation

TK-307 configure

1 Anschluss

2 Rohrlänge

3 Auflösung

4 Zubehör

Amount

additional infomation

ER-214 configure

1 Gehäuse

2 Ausgang

3 Schaltverzögerung

4 Empfindlichkeitsbereich

5 Versorgungsspannung

6 Quittiertaster

Amount

additional infomation

ZT-N configure

1 Measuring Range

2 Output Signal

3 Electrical Connection

4 Process Connection

Amount

additional infomation

MKL configure

1 Material

2 Anschlussflansch

3 Prozessanschluss

4 Schwimmer

5 Ablassschraube

6 Anzeige

7 Mittenentfernung

Amount

additional infomation

T-200.L configure

1 Länge

2 Anschluss

3 Anschlussgewinde

4 Befestigungswinkel

5 Schwimmertyp

Amount

additional infomation

PPS-390 configure

1 Mediumsdichte

2 Magnetposition

Amount

additional infomation

KG-2XX configure

1 Versorgungsspannung

2 Gehäuse

3 Kontakte

4 Halterung

Amount

additional infomation

KS-CAN-03 configure

1 Protectice Cap

Amount

additional infomation

TK-315 configure

1 Gehäuse

2 Eingang

Amount

additional infomation

TK-301 configure

1 Material Rohr und Verschraubung

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

QFS-5x | QFS-6x configure

1 Ausführung

2 Kontakt

3 Schaltkontakt

4 Kabelmaterial

5 Kabellänge

6 Ex-Option

Amount

additional infomation

TK-313 configure

1 Gehäuse

2 Eingang

Amount

additional infomation

BI configure

1 Kontaktart

2 Kabelart

3 Kabellänge

4 Befestigung

Amount

additional infomation

QFS-3X configure

1 Schwimmertyp

2 Kontakt

3 Schaltkontakt

4 Hysterese

5 Kabelmaterial

6 Kabellänge

7 EX

Amount

additional infomation

ZS-2 configure

1 Signalausgang

2 Druckmessbereich

3 Prozessanschluss

Amount

additional infomation

PVS-390 configure

1 Mediumsdichte

Amount

additional infomation

NP-255 configure

1 Ausführung

2 Staurohr-Anzahl

3 Anschlussgewinde

4 Druckschalter

5 Kontakt

6 Längen

Amount

additional infomation

Fluidix Lub-VDT configure

1 Signalausgang

2 Messbereich

Amount

additional infomation

KST-20 Vento configure

1 Innensensor

2 Außensensor

Amount

additional infomation

T-200.L 230V configure

1 Länge

2 Auswerteelektronik

3 Anschlussgewinde

4 Befestigungswinkel

5 Schwimmertyp

Amount

additional infomation

PVG-399 configure

1 Ausführung

Amount

additional infomation

EE-2XF configure

1 Typ

2 Elektrodenanzahl

3 Anschlussgewinde

4 Stabmaterial

5 Stabdurchmesser

6 Beschichtung

7 Kabelbruchwiderstand

8 Sicherheitsfunktion

9 Stablänge

Amount

additional infomation

NP-256 configure

1 Ausführung

2 Staurohr-Anzahl

3 Anschlussgewinde

4 Druckschalter

5 Kontakt

6 Längen

Amount

additional infomation

TK-303 configure

1 Gewinde

2 Schwimmerausführung

3 Anschluss

4 Rohrlänge

5 Auflösung

6 Explosionsschutz

7 Zubehör

Amount

additional infomation

ES-22 configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

additional infomation

W-35X configure

1 Anschlussmaterial

2 Rohrmaterial

3 Flanschgröße

4 Mittenentfernung

Amount

additional infomation

T200.F-24V configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schwimmermaterial

7 Anschluss-Elektronikteil

Amount

additional infomation

ViscoScope® VA-300 configure

1 Viscosity

2 Temperature

3 Process-Connection

4 Material

5 Non-active-Extension

6 Ex-Bereich

Amount

additional infomation

QFSK-2X configure

1 Schwimmertyp

2 Anschlussgewinde

3 Schwimmeranzahl

4 Stablänge

5 EX

Amount

additional infomation

ES-21 configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

additional infomation

ZMF-200e-IR configure

1 Typ

2 Temperaturbereich

3 Messmethode

4 Signalausgang

5 Messbereich

6 Ex-Zulassung

Amount

additional infomation

TK-101 configure

1 ATEX

Amount

additional infomation

ZT-F configure

1 Measuring Range

2 Output Signal

3 Electrical connection

4 Process connection

Amount

additional infomation

T207

Magnetic immersion probes made of PPH

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

T205-0

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 68 Kabel
Float type : max. 4x Zylinder Edelstahl 27 mm Ø
connection cable : 1000 mm PUR Blau
Sliding tube length : max. 6000 mm
Operating temperature : max. 120 °C
Operating pressure : max. 10 bar (Schwimmer)
media density : 0,78 g/cm³
Number of contacts : max. 2 Schließer / 2 Öffner
Switching current : 1A, 2A
Switching capacity : 50 W/VA
min. contact distance with several floats : 50 mm

KS-Serie

Sensors for temperature & humidity measurement

The KS series sensors are modular temperature and humidity measurement sensors in compact housings for use in almost any application.

Specifications

Housing shapes : Stabform | Alu- oder Polycarbonatgehäuse
measurands : Temperatur | relative Feuchte
Measuring range : -40...+80 °C | 0...100% rH
Signal output : 0...10 V oder 4…20 mA
Power supply : 12...30 V DC | 24 V DC

cIO CANopen Module

Compact I/O modules for DIN rail mounting

product series of compact CANopen I/O modules with various electrical connections

Properties

Housing : Kunststoffgehäuse*
Dimensions (LxBxH) : 18 x 90 x 62 mm
Internal circuits : Ausgangsschutzschaltungen gegen Überspannung und elektrostasche Entladung
Fieldbus and I/O level : getrennt durch galvanische Trennung
ltdata.*zumAufrastenaufDIN-Trageschienen :

ElectricalConnection

Operating voltage : 11...32V DC (typ. 24V DC)
Operating temperature : 0...+55 °C
Operating temperature : optional -40...+70 °C
Conductor cross-section : 0,08...1,5 mm² (AWG28...AWG14)

CAN bus properties

baud rate (max.) : 1 MBit
ciA Standards : Ds301 Version 4.2 & DS401 Version 3.0
ISO standards : ISO11898 (+ Transceiver TJA1050)
PDO : siehe Dokumente

ÜTA-32

Overfuelling indicator

The top-mounted tank indicator is a mechanically operated, on-the-spot indicator. The liquid level in the tank located below the indicator is determined proportionately to the filling level and is indicated. Control of the level is easily achieved through the installation of switching contacts. The switching points for level control can be steplessly adjusted, on-the-spot and at any time.

Properties

connection : G 1” (andere Gewinde auf Anfrage)
max.length guide tube : siehe Diagramm
Operating temperature : atmosphär. Bedingungen
Operating pressure : atmosphär. Bedingungen
media density : siehe Eintauchtiefe
Number of contacts : beliebig
Contact load : max. 10 VA, max. 230 V AC
Length : max. 1750 mm

Material

Sight tube : PVC transparent
connection : PVC-Verschraubung mit PTFE-Stangenführung
Guide rod : Edelstahl, Titan, Hastelloy B, Hastelloy C oder PVCRohr
float : PE / PP

MTA

Mechanical tank level indicator

The tank level indicator is a mechanically actuated indication operating "on the spot”. It permits a high degree of safety and flexibility thanks to separate points of measurement and indication.

Properties

Tank connection : Flansch ab DN 80 (Sonderanschlüsse auf Wunsch)
Material : siehe Maßbild
Material Tube : PVC, transparent | Ø 50 x 1,8 | Ø 63 x 3,0
Operating temperature : –20...+60 °C
Operating pressure : atmosphärisch

Material Float

PPH : Ø 70 mm 460 g
PVC : Ø 70 mm 455 g
PPH : Ø 40 mm 370g
PE : Ø 70 mm ca. 450 g

Material Rope

PPH : (rot, Ø 2 mm) ~ 2 g/m
Polyester : (bunt, Ø 2 mm) ~ 4 g/m
PTFE : (weiss, Ø 3 mm) ~ 10 g/m

T201

Immersible Magnetic Probe made of stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ER-104

1-channel electrode relay

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
Storage temperature : –30...+80 °C
Weight : ca. 150g
ltdata. :

Power supply

nominal voltage : siehe Typenschlüssel
AC nominal frequency : 48...62 Hz
Power consumption : max. 1 W / VA

Input

Open circuit voltage : ≤ 10 V AC
Short-circuit current : ≤ 5 mA
Switching delay : siehe Typenschlüssel
Sensitivity range : siehe Typenschlüssel

Output

Contacts : potentialfreie Wechselkontakte
Switching voltage(min) : 5 V
Switching voltage (max) : 250 V AC / 150 V DC
Overvoltage category : EN 61010-1 Kategorie III

Switching current

Switching current : min. 5 mA
Switching current : max. cos φ =1 5 A
Switching current : max. cos φ = 0,7 3 A/AC
Switching current : max. cos φ = 1

EF2X

Double pipe and filling pipe monitoring

EF2L and EF2T -conductive- with general technical approval for construction Z-65.13-405

Properties

Electrical connection : Stecker GDM
Protection class EN60529 : IP 65 mit Dichtung
connection : PVC Überwurfmutter G 1 ¼“
PVC : max. +60 °C
PE : max. +80 °C
Storage temperature : -30...+85 °C
Operating pressure : max. 6 bar

Material

Pipe : PVC | PE
Sensor rods : Edelstahl 1.4571 | Hastelloy B/C | Titan | Tantal

tdata.ElektronikteilET-473L|ET-473T

nominal voltage : 20...30 V DC
Power consumption : 1 VA
Output contact : Schließer | Öffnerkontakt (NO/NC) (nicht potentialfrei)
Switching voltage : 12...30 V DC
Switching current : max. 300 mA
Switching capacity : max. 9 W
Sensitivity range : 2...30 kOhm
ltdata. :

T209

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

T200

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

T204

Magnetic immersion probe made of stainless steel (1.4571)

For use with highly aggressive liquid media to detect level limit values in containers. Suitable for use in hazardous areas, zone 0 (category 1).

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
connection thread : G1 1/2" | G2"
Sliding tube length : max. 6000 mm (Rohr Ø 12 mm)
Operating pressure : max. 20 bar (Kugel) | max. 15 bar (Zylinder)
Operating temperature : max. 135 °C
Number of floats : max. 4

Float type

Stainless steel ball 52mm ⌀ : Dichte: 0,75 g/cm³ | mind. Kontaktabstand: 75 mm
Stainless steel ball 62mm ⌀ : Dichte: 0,65 g/cm³ | mind. Kontaktabstand: 85 mm
Stainless steel cylinder 44 mm Ø : Dichte: 0,76 g/cm³ | mind. Kontaktabstand: 75 mm

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 4
normally open : 6
Normally closed contact : 4

ZDT-H

Differential pressure transmitter for high pressure applications

Versatile and reliable differential pressure transmitter for measuring air, non-aggressive media as well as liquids and oils.

Properties

Pressure type : Differenzdruck
Housing : Kunststoff mit LCD-Anzeige (oponal)
Overpressure : 1,2* (1,5*) x Nenndruck

Measurement parameters

Total error : ± 2,5 % FS (typ. ± 0,5 %)
Linearity error : ± 1 % FS
Signal output selection : 0...10 V 4...20 mA, 2-Leiter 4...20 mA, 3-Leiter
Pressure range : 5…1.000 bar

Operating conditions

Operating voltage : 14...28 VDC ± 10 %
Operating temperature : 0...+50 °C
Storage temperature : -20°C...+120°C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : G1/4" (andere auf Anfrage)

TK-307

Stainless steel level sensor

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Connection housing : Aluminium H 30 mm x B 50 mm x T 45 mm
Connection socket : Polyester H 55 mm x B 80 mm x T 45 mm
Protection class socket / plug : IP 65
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Resolution depending on type : 7,5 mm | 10 mm | 15 mm | 20 mm | 1% | 2% | 5%
Mounting : 2 Schlauchschellen
Accessories : R/I-Wandler TK-101

ER-214

Electrode Relays

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
Storage temperature : –30...+80 °C
AC nominal frequency : 48...62 Hz
Power consumption : max. 1 W / VA
Weight : ca. 150 g

Input

Open circuit voltage : ≤ 10 V AC
Short-circuit current : ≤ 5 mA

Output

Contacts : 1 potentialfreie Wechselkontakte pro Kanal
Switching voltage : min. 5 V | max. 250 V AC | max. 150 V DC
Switching current : min. 5 mA | max. cosφ=1 3A | max. cosφ=0,7 1 A/AC | max. cosφ=1
Switching capacity : min. 300 mW | max. 750 VA / 150 W (30 V DC / 5 A) / 18 W (150 V DC / 0,12 A)
Working / Idle current : umschaltbar
overvoltage category : EN 61010-1 Kategorie III

ZT-N

Customisable low pressure sensor for precise measurement of the smallest pressures

Reliable low pressure sensor in a robust and compact design

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

MKL

Magnetic Flap Indicator

The MKL level indicator is connected by its two connections to the container to be monitored (see connection example). According to the law of interconnected containers the level in the float chamber corresponds exactly to the level in the container

Properties

connection : Flansch ab DN 15
Material : rostfreier Edelstahl, PVC, PPH, PVDF
Material flange : Edelstahl 1.4571, C22.8
Material Float : Edelstahl, Titan, PVC, PPH, PVDF
Number of contacts : beliebig
Contact load : max 10 VA, max 230 V AC
Display length : max. 6m

Operating temperature

PTFE seal : max. 150 °C
Stainless steel: Klingerit seal : max. 200 °C
PVC : max. 60 °C
PPH : max. 90 °C
PVDF : max. 130 °C

Stainless steel float

Weight : ~ 300 g
Dimensions : Ø 52 x 270
Operating pressure : 16 bar
media density : ρ ≥ 0,70 g/cm³

Stainless steel float

Weight : ~ 320 g
Dimensions : Ø 52 x 270
Operating pressure : 40 bar
media density : ρ ≥ 0,75 g/cm³

Titanium float

Weight : ~ 180 g
Dimensions : Ø 52 x 150
Operating pressure : 16 / 40 bar
media density : ρ ≥ 0,73 g/cm³

PVC float

Weight : ~ 331 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,8 g/cm³

PPH float

Weight : ~ 283 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,69 g/cm³

PVDF float

Weight : ~ 352 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,85 g/cm³

T-200.L

Leakage probes with general building authority approval

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

Connection

Box : Polyesterdose (PO)
Box : Polyethylen-Anschlusskopf (PE)
Cable : Kabel (TPK)
Plug : Stecker (ST)

Properties

Protection class : IP 65
Cable entry : PVDF-Verschraubung , PVC-Dichtung
Material Float : PE
Material leakage probe base : PE
Cable : TPK (PVC Basis)
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
media density : mit Schwimmer PE 52 ρ ≥ 1,05 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Resistance value

Operational readiness : ca. 1 kΩ
Leakage detection : ca. 12 kΩ

EK-CAN

PC program for CANopen sensors

Evaluation and configuration software for Fluid.iO CANopen sensors

Properties

Operating system : Windows
ltdata.BuildVersion : 1.0.5 (28.10.2025)
installation type : ZIP, portable
ltdata.Sprache : DE | EN

PPS-390

PPH float with magnet insert

for actuating monostable and bistable contacts

Variants

32 : AußenØ 26 x 180 mm, für RohraußenØ 32 u. 34 mm Gewicht ca. 38 g
37 : AußenØ 29,5 x 170 mm, für RohraußenØ 40 mm (PN 16) Gewicht ca. 62 g
40 : AußenØ 40 x 165 mm, für RohraußenØ 50 mm Gewicht ca. 145 g
50 : AußenØ 50 x 125 mm, für RohraußenØ 63 mm Gewicht ca. 156 g

KG-2XX

Capacitiv Limit Switch

Capacitive limit switches respond on approach of solid and liquid media.

Properties KG-201

Operating voltage : 20...250 V AC
Switching version(*standard) : *Schließer | Öffner
connection : 2-Leiter
nominal voltage : 110 VAC
No-load current : typ. 2,5 mA
Min. switching current : typ. 5 mA
Max switching current : 330 mA
Max. Voltage drop with "ON" : typ. 6 V
Min. switching capacity : 0,55 V A
Max. switching capacity : 36,3 V A
Switching distance(mm) : 3...30
Switching hysteresis : typ. 10%
Repeatability atTa=const. : typ. 0,1 %
Drift : < 10%
Switching frequency : max. 25 Hz
Switching indicator : LED rot, eing.
Permanent short-circuit protection : nein
Permissible ambient temperature : –25...+70 °C

Properties KG-200|KG-202

Operating voltage : 20...250 V AC
Switching version(*standard) : *Schließer | Öffner
connection : 2-Leiter
nominal voltage : 220 VAC
No-load current : typ. 2,5 mA
Min. switching current : typ. 5 mA
Max switching current : 330 mA
Max. Voltage drop with "ON" : typ. 6 V
Min. switching capacity : 1,1 V A
Max. switching capacity : 72,6 V A
Switching distance(mm) : 3...20
Switching hysteresis : typ. 10%
Repeatability atTa=const. : typ. 0,5 %
Drift : < 10%
Switching frequency : max. 25 Hz
Switching indicator : LED gelb, intern
Permanent short-circuit protection : nein
Permissible ambient temperature : –20...+60 °C

properties KG-211

Operating voltage : 10...35 V DC
Permissible ripple : 10 %
Switching version(*standard) : *Schließer, Öffner
connection : 3-Leiter
nominal voltage : 24 V DC
No-load current : typ. 15 mA
Max switching current : 400 mA
Max. Voltage drop with "ON" : 2,5 V
Max. switching capacity : 14 W
Switching distance(mm) : 3...30
Switching hysteresis : < 10%
Repeatability atTa=const. : < 0,1%
Drift : < 10%
Switching frequency : max. 50 Hz
Switching indicator : LED rot, eing.
Reverse polarity protection : ja
Permanent short-circuit protection : ja
Permissible ambient temperature : –25...+70°C

Properties KG-210|KG-212

Operating voltage : 10...35 V DC
Permissible ripple : 10 %
Switching version(*standard) : *Schließer, Öffner
connection : 3-Leiter
nominal voltage : 24 V DC
No-load current : typ. 15 mA
Max switching current : 400 mA
Max. Voltage drop with "ON" : 2,5 V
Max. switching capacity : 14 W
Switching distance(mm) : 3...25
Switching hysteresis : < 10%
Repeatability atTa=const. : < 0,5%
Drift : < 10%
Switching frequency : max. 50 Hz
Switching indicator : LED gelb, intern
Reverse polarity protection : ja
Permanent short-circuit protection : ja
Permissible ambient temperature : –20...+60°C

KS-CAN-03

CANopen Climate Transmitter

Climate transmitter KS-CAN-03 for temperature and humidity measurement, according to CAN bus specifications with a digital climate probe

Properties

Housing : Aluminium, eloxiert
Measuring element humidity : kapazitiv, betauungsfest
Measuring element temperature : Halbleiter
measuring resolution : 12 Bit
measuring grid : ab 5 ms

ElectricalConnection

CAN protocol : CANopen 2.0 A, nach ciA DS 404
Physical Layer : nach DIN 11898
Option : Bereistellung des EDS-Files

tdata.

Operating temperature : -40...+80 °C
Storage temperature : -40°C...+120°C
Minimum air velocity across the sensor required for measurement : 1,5 m/s

TK-315

Evaluation unit with 4 limit contacts (NO-contacts)

The TK-315 limit comparator can be used in conjunction with our TK-30... continuous level sensors with 0(4)...20 mA or 0...10 V output signal for level control/measurement.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
nominal voltage : 24... 230 V AC/DC
Power consumption : 2 VA
Dimensions housing type B : 22,5 x 114,5 x 99 mm
Dimensions housing type C : 22,5 x 114,5 x 114 mm

Input

power : 0/4...20 mA
Voltage : 0...10 V
Resistance in three-wire circuit RG : 0–4...10 kΩ

Output

Output contacts : 4 Schließerkontakte
Switching voltage : max. 250 V AC
Switching current : max. 3 A
Switching capacity : max. 500 VA
Temperature influence tolerance : max. ± 0,6 % der Signalspanne
Mounting : Tragschiene nach EN 50022
Current output : 4...20 mA bezogen auf die Masse des Eingangs
Display (%) : 2-stellig, 7-Segment
Weight : 175 g

TK-301

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 05 (06)
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Operating pressure : max. 20 bar
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm| 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 05 : 0,81 g/cm³
Type 06 : 0,67 g/cm³

ZS-Serie

Differential pressure sensor for low pressure

Compact and robust differential pressure transmitter for measurement on air and other non-aggressive media

Properties

Pressure type : Differenzdruck
Housing : Aluminium
medium : Luft und nicht aggressive Gase

Measurement parameters

response time : < 2,5 s
Hysteresis : 0,1 %
Overload capacity : 4* fach bis 500 mbar, darüber 2* fach
Signal output selection : 0...10 V | 4...20 mA, 2-Leiter

Operating conditions

Operating voltage : 24 VDC/AC ±10 % (0...10 V) | 15...30 VDC (4...20 mA)
Operating temperature : -20...+50 °C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 4 mm oder 6 mm
Cable gland : PG 7

QFS-5x | QFS-6x

Teflon float switch for all kinds of liquids up to 150°C

The float of the QFS-50 and QFS-60 float switches is made of Teflon. Inside the float, one or two reed contacts with a movable permanent magnet are inserted as a switching element.

Technical Data

Material : PTFE (Teflon)
connection cable : Silikon, Teflon
Operating temperature : max. +150°C
Operating pressure : 1 bar
media density : ρ ³ 0,75 g/cm³
Switching system : Reed-Schalter
Contact : Wechsler, NO, NC
Inductive/capacitive loads : Unbedingt Kontaktschutz vorsehen
Ex-protection optional : Elektrische Daten siehe EG-Prüfbescheinigung IBExU10ATEX 1089

Reed contact

Switching current : 1 mA ... 1 A
Switching voltage : 24 ... 250 V AC/DC
Switching capacity : Max. 1A, 60 VA / 60 W
Switching hysteresis : ca. 100 mm
Switching angle : ca. +20°...–20°

Namur circuit (1kΩ/12kQ)

Switching current / switching voltage : nur zum Anschluss an KR-163... oder andere „Namur”-Relais
Switching hysteresis : ca. 100 mm
Switching angle : ca. +20°...–20°

T202

Immersible Magnetic Probe made of stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

TK-313

Evaluation unit with 2 change over limit contacts

The TK-313 limit comparator can be used in conjunction with our TK-30... continuous level sensors with 0(4)...20 mA or 0...10 V output signal for level control / measurement.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
nominal voltage : 24... 230 V AC/DC
Power consumption : 2 VA
Dimensions housing type B : 22,5 x 114,5 x 99
Dimensions housing type C : 22,5 x 114,5 x 114

Input

power : 0/4...20 mA
Voltage : 0...10 V
Resistance in three-wire circuit RG : 0–4...10 kΩ

Output

Output contacts : 2 Wechselkontakte
Switching voltage : max. 250 V AC
Switching current : max. 3 A
Switching capacity : max. 500 VA
Temperature influence tolerance : max. ± 0,6 % der Signalspanne
Mounting : Tragschiene nach EN 50022
Current output : 4...20 mA bezogen auf die Masse des Eingangs
Display (%) : 2-stellig, 7-Segment
Weight : 175 g
ltdata. :

BI

Bistable Switch

Properties

Protection class : IP 65
Switching current : max. 1 A
Switching voltage : max. 24 V
Switching capacity : max. 20 W/VA

Material

Housing : Messingrohr Ø 10 x 1
Cable : TPK (PVC basis) | SIL (Silikon)

Operating temperature

TPK : –15 ° ... + 60 °C
SIL : –15 ° ... +130 °C

QFS-3X

Mercury-free float switch with µ-switch

Properties

Protection class EN60529 : IP 68
Cable entry : PVC , PTFE bzw. PVDF
Conductor cross-section : 3 x 0,75 mm², PUR 3x 0,5mm²
Operating pressure cylinder : max. 1 bar
Operating pressure sphere : max. 2 bar
Switching system : µ-Schalter
Contact : Wechsler, NO, NC

Material Float

QFS-30 : PPH (Polypropylen)
QFS-31 : PPH (Polypropylen)
QFS-34 : PE (Polyethylen)

Cable

TPK : PVC Basis Ø 5,9 mm
TPKV : PVC verstärkt Ø 7,3 mm
PUR : Polyurethan Ø 5,4 mm
SIL : Silikon Ø 6,4 mm
FEP : Teflon Ø 4,0 mm
AEM : Ethylen-Acrylat-Kautschuk

Cable length between float & attachment

TPK : 70 mm
TPKV : 90mm
PUR : 100mm
SIL : 80 mm
FEP : 110 mm
AEM : abhängig vom Innenkabel

Operating temperature

TPK(V), AEM : max. + 60 °C
PUR : max. + 70 °C
Silicone,Tefloncable with PE float : max. + 80 °C
Silicone, Teflon cable with PP float : max. + 85 °C

MaterialDensity

QFS-31 : ≥≥ 0,6 g/cm³
QFS-34 : ≥≥ 0,75 g/cm³
QFS-30 TPK(V) cable : ≥≥ 0,85 g/vcm³
QFS-30 PUR cable : ≥≥ 0,95 g/cm³
QFS-30 SIL cable : ≥≥ 0,90 g/cm³
QFS-30 FEP cable : ≥≥ 0,95 g/cm³
QFS-30AEM cable : ≥≥ 0,90 g/cm³

ZS-2

Differential pressure sensor for low pressure

Compact and robust differential pressure transmitter for measurement on air and other non-aggressive media

Properties

Pressure type : Differenzdruck
Housing : Aluminium
medium : Luft und nicht aggressive Gase

Measurement parameters

response time : < 2,5 s
Hysteresis : 0,1 %
Overload capacity : 4* fach bis 500 mbar, darüber 2* fach
Signal output selection : 0...10 V | 4...20 mA, 2-Leiter

Operating conditions

Operating voltage : 24 VDC/AC ±10 % (0...10 V) | 15...30 VDC (4...20 mA)
Operating temperature : -20...+50 °C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 4 mm oder 6 mm
Cable gland : PG 7

Pressure measuring range

0...2,5mbar :
0...5mbar :
0...10mbar :
0...25mbar :
0...50mbar :
0...100mbar :
0...250mbar :
0...500mbar :
0...1.000mbar :

PVS-390

PVC float with magnet insert

for actuating monostable and bistable contacts

Variants

40 : AußenØ 40 x 165 mm, für RohraußenØ 50 mm Gewicht ca. 145 g
50 : AußenØ 50 x 125 mm, für RohraußenØ 63 mm Gewicht ca. 156 g

NP-255

Level Switch - multiple 2...4 - pneumatic

very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated

Properties

Protection class EN60529 : IP 54
connection thread : ab G2”
Union nut : ab G2¾”
Container connection flange : ab DN 25
Hose Ø : 16 mm
Operating temperature : +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching capacity : 500 VA
Switch-on point (Viton membrane) : 150 mm WS ±30 mm
Switch-off point (MembraneViton) : 90 mm WS ±30 mm

Material

Pitot tube / Hose : PVC
Screw fitting/grommet : PVC
flange : PVC
Connection head : PVC

Switching voltage

silver : max. 250 V AC
Gold : max. 24 V AC

Switching current

silver : max. 6 A
Gold : max. 100 mA

ER-Serie

Electrode Relays

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

details : folgen

Fluidix Lub-VDT

Oil condition sensor for permanent monitoring of mechanical properties of liquids

The FluidIX Lub-VDT enables inline monitoring of mechanical fluid properties.

Properties

CE marking : EN 61000-6-1/2/3/4
Operating voltage : 9...32 V DC
Housing material : Edelstahl
Protection class : IP 67
Dimensions : 30x90 mm
Process connection : G 3/8"
Electrical connection : M12-8 A-Coding
Weight : 150g
Measurement output : 2x 4...20mA
bus protocol : ModbusRTU, CANopen

Measured variables

Resonator frequency : 20...25 kHz
Viscosity : 1-650 cSt (mm²/s)
density : 0.5-1.5 g/cm³
Temperature : -40...+125°C
sampling rate : 1/s

Operating conditions

Temperature of the fluid : -40...+125°C
Housing temperature : -40...+100°C
oil pressure : Max. 50 bar
particle size : 250 μm

XR Relais

Electrode relays and contact protection relays

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised. The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Quiescent current : umschaltbar
Weight : ca. 250 g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

KST-20 Vento

Automatic, controlled ventilation and dehumidification as well as cooling of rooms with aH-Controlled technology*.

The KST-20 Vento is a climate control unit with aH-Controlled technology for ventilation, dehumidification and cooling for all types of private, commercial and industrial rooms. With the three operating modes for ventilation, dehumidification and cooling, the KST-20 Vento climate control can be used flexibly in almost all living, working and industrial areas.

Properties

Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 160 x 90 x 50 mm
Housing : hochwertiges ASA+PC (UL 94 V-0) für harte Beanspruchung, flammwidrig und selbstverlöschend
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100% rF,
Measuring accuracy (humidity) : ±2%
measuring range (Temperature) : -40…+80°C
Measuring accuracy (temperature) : ±0,2°C

T-200.L 230V

Leakage probes with general building authority approval

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

Connection

Box : Polyesterdose (PO)

Properties

Protection class : IP 65
Cable entry : PVDF-Verschraubung , PVC-Dichtung
Material Float : PE
Material leakage probe base : PE
Cable : TPK (PVC Basis)
Operating temperature : max. 60 °C
Operating pressure : atmosphärisch
media density : ρ ≥ 0,6 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Power supply

nominal voltage : 24…230 V AC/DC
Power consumption : ≤ 2 W

Output

Output contact : 2 potentialfreie Wechselkontakte
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 5 A AC / 5 A DC
Switching capacity : max. 750 VA / 90 W
displays : Betriebs-LED grün, Funktions-LED rot
Switching delay : ca. 0,5 s Anzug/Abfall
CE marking : siehe Konformitätserklärung

PVG-399

PVC weight with magnet insert and eyelet for cable fixing

for actuating monostable and bistable contacts

Variants

32 : Außen Ø 25 mm x 175 mm, Gewicht ca. 180 g, geeignet für Rohraußen Ø 32 u. 34 mm bis 6m Länge
37 : Außen Ø 30 mm x 170 mm, Gewicht ca. 180 g, geeignet für Rohraußen Ø 40 mm bis 6m Länge
40 : Außen Ø 40 mm x 110 mm ca. 175g, geeignet für Rohraußen Ø 50 mm bis 6m Länge
4012 : Außen Ø 40 mm x 110 mm ca. 300g, geeignet für Rohraußen Ø 50 mm bis 12m Länge
4016 : Außen Ø 40 mm x 110 mm ca. 360g geeignet für Rohraußen Ø 50 mm bis 16m Länge
50 : Außen Ø 50 mm x 130 mm ca. 255g, geeignet für Rohraußen Ø 63 mm bis 6m Länge
5012 : Außen Ø 50 mm x 130 mm ca. 300g geeignet für Rohraußen Ø 63 mm bis 12m Länge
5016 : Außen Ø 50 mm x 130 mm, ca. 360g, geeignet für Rohraußen Ø 63 mm bis 16m Länge

KS-17

digital climate transmitter

The digital climate sensor measures temperature and relative humidity in a combined sensor element.

Technical specifications

Housing : Plastik
Measured variable : Temperatur und relative Feuchte kapazitiv (alle Geräte)
Measurable temperature : -40…+120 °C
Measuring range humidity : 0…100 % rH
Sensor technology : Halbleiter
Power supply : 2,4…5,5 V
Output : digitales Protokoll
features : Gehäuse für Oberflächenmontage

EE-2XF

Conductive electrodes as overfill protection for Ex-Zone 0 (Cat. 1)

Conductive electrodes EE-2XF for monitoring conductive liquids within the Ex area Zone 0 (Cat. 1) for water-polluting and flammable liquids.

Properties

connection : Edelstahl (1.4571)
Protection class : IP 65
Ex-protection : TÜV 02 ATEX 1796 X
Ex protection type : II 1 G Ex ia IIC T6 bzw. Ex ia IIB T6 / II ½ G Ex ia IIC T6 bzw. Ex ia IIB T6
connection thread : G1", G1¼", G1½”
Coating length : voll=ganzer Stab (10 mm am Stabende sind blank) teil =ca. 250 mm von oben
Rod diameter : 4 oder 6 mm
rod length : max. 6 m
Operating pressure media side : max. 40 bar
Maximum permissible electrical connection values : Stromkreis in Zündschutzart Eigensicherheit Ex ia IIC/IIB
Connection values : Ui 15V | Li 10 mA | Pi 100 mW
Internal inductances / capacitances : vernachlässigbar klein
Spacer : ab Länge > 1000 mm je 1000 mm 1 Abstandshalter

Operating temperature

Category 1 Class T6...T1 : 60 °C
Category 2 Class T6 : Medien & Umgebung 80 °C
Category 2 Class T5 : Medien & Umgebung 95°C
Category 2 Class T4 : Medien 130°C, Umgebung 100°C
Category 2 Class T3...T1 : Medien 150°C, Umgebung 100 °C

Material

Cable entry EE-21 : Edelstahl (1.4571)
Cable entry EE-22 : PVDF
Electrode body material : Edelstahl (1.4571)
Seal (head) : Viton
Seal (media side) : Viton / PTFE
Potential equalisation conductor connection : Edelstahl (1.4571)
Material electrode rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Tantal
material coating : PTFE

NP-256

Level Switch - multiple 2...4 - pneumatic (hose)

very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated

Properties

Protection class EN60529 : IP 54
connection thread : ab G2”
Union nut : ab G2¾”
Container connection flange : ab DN 25
HoseØ : 13x2 mm
Operating temperature : +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching capacity : 500 VA
Switch-on point (Viton membrane) : 150 mm WS ±30 mm
Switch-off point (MembraneViton) : 90 mm WS ±30 mm

Material

Hose : PVC
Screw fitting/grommet : PVC
flange : PVC
Connection head : PVC

Switching voltage

silver : max. 250 V AC
Gold : max. 24 V AC

Switching current

silver : max. 6 A
Gold : max. 100 mA

TK-303

Level transmitter for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class : IP 65
Float type : 03, 04, 09
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar (Kugel) max. 15 bar (Zylinder)
Resolution : 7,5 mm | 10 mm
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 03 : 0,75 g/cm³
Type 04 : 0,65 g/cm³
Type 09 : 0,76 g/cm³

ES-22

electronic safety pressure limiter with 2 safety functions

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

W-35X

Water Level Gauge with sight glass indicator

The water level gauge is particulary suitable for all liquid media which are aggressively hot and rapidly moved in a container, but are not too much contamined.

Properties

Tank connection : Flansch ab DN 25 oder Verschraubung ab G ½"
Material Float : PPH max. 2,5 bar, Glas max. 10 bar
cable length : bei monostabilem Kontakt: Standard 2 m
Number of contacts : beliebig
Contact distance : min. 10 mm
Temperature of the fluid : mit Plexiglasrohr max. +70 °C
media density : ρ ≥ 0,95 g/cm³ | ρ ≥ 0,85 g/cm³ (auf Wunsch)

Properties W-350

Material tube sight glass : transparentes PVC
Temperature of the fluid : max. +60 °C
Operating pressure : max. 2,5 bar
Material flange : PVC
Material connection with angle valve : PVC
Material sealing ring : Gummi

Properties W-351

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Rotguss
Material connection with angle valve : Rotguss
Material sealing ring : Silikon
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-352

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4571 als Bogen 90°
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-353

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4401
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

ZDT-Serie

Differential pressure transmitter for high or low pressure applications

Versatile and reliable differential pressure transmitter for measuring air, non-aggressive media as well as liquids and oils.

Properties

Pressure type : Differenzdruck
Housing : Kunststoff
LCD display : optional
Signal output : 0…10 V | 4…20 mA

Measurement parameters

Total error : ± 2,5 % FS (typ. ± 0,5 %)
Linearity error : ± 1 % FS

Operating conditions

Operating temperature : 0...+50 °C
Storage temperature : -20°C...+120°C

T200.F-24V

Overfill protection with 24V direct connection

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection

Polyester junction box : PO/ET-520
Polyethylene connection head : PE/ET-521

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating temperature : max. 80 °C
Operating pressure : atmosphärisch
media density : ρ ≥ 0,6 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Power supply

nominal voltage : 24 V DC (24…300V DC)
Power consumption : ≤ 1 W

Output

Output contact : 1 potentialfreier Wechselkontakt
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 3 A AC / 3 A DC
Switching capacity : max. 750 VA / 90 W

Optocoupler

Switching voltage : max. 30 V
Switching current : max. 100 mA
displays : Betriebs-LED grün, Funktions-LED rot
Switching delay : ca. 0,5 s Anzug/Abfall

ViscoScope® VA-300

Maintenance-free inline process viscometer for real-time viscosity measurement

The ViscoScope® sensors are made of high-quality, first-class stainless steel and impress with their intelligent, robust design.

Properties

Protection class : IP65
Material : 1.4571 / 1.4404 (316Ti / 316L)
Process temperature : -40°C … +450°C
Process pressure : Vakuum ... 450 bar
Process connections : DIN Flansch | ANSI Flansch | NPT | Varivent® | Tri-Clamp
Cable length sensor - transmitter : max. 1.000m
max. flow velocity : 10 m / sec
Ex approval : (optional) II 1/2G Ex ia IIC T6...T3 Ga/Gb
Material (optional) : Hastelloy C22, Duplex 2205, Teflon

Sensor types

big cylinder : VA-300L
small cylinder : VA-300M
Sphere : VA-300H
small sphere : VA-300X

Measuring range

VA-300L : 0,1 - 2.500 mPa·s x g/cm³
VA-300M : 1 - 25.000 mPa·s x g/cm³
VA-300H : 0,01...250 Pa·s x g/cm³
VA-300X : 0,1...2.500 Pa·s x g/cm³

Probe dimensions

VA-300L : Ø 32 x 190 mm
VA-300M : Ø 32 x 165 mm
VA-300H : Ø 32 x 130 mm
VA-300X : Ø 19 x 115 mm

BK-3X0

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –25...+70 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm

Material

Housing : Polycarbonat
Mounting clip : V2A, Kabelbinder (PP)
Rivet : V2A
Screw connection : M 20 x 1.5, Polyamid

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 5...250 V AC/DC
Switching current : 1mA...6 A AC/DC
Switching capacity(min.) : 300 VA, 60 W
Switching capacity(max.) : 5 mW

QFSK-2X

Stainless steel float switch combination

Float switch combinations QFSK for level monitoring & level control with maximum and minimum contact sensor.

Properties

Protection class EN60529 : IP 68
Material Float : VA 1.4571
Material hose : Edelstahlwellschlauch (1.4404) mit Edelstahldrahtumflechtung (1.4301)
rod length : max. 5 m
Number of floats : bis 5
Operating temperature : max. + 150 °C
media density : ρ ≥ 0,8g/cm³
Switching system : Reed-Schalter
Contact : Wechsler, NO, NC
Switching voltage : 4...250 V AC/DC
Switching current : 1 mA ...1 A
Switching capacity : max. 1A, 60 VA/60 W
Switching hysteresis : ca. 100 mm
Switching angle : ca. + 20° / – 20°
Ex-protection : optional; IBExU10ATEX 1089
Operating pressure WFSK-25 : max. 15 bar
Operating pressure QFSK-26 : max. 6 bar

ES-21

Electronic safety switching device with 1 safety function

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

ZMF-200e-IR

Robust gas sensor for industrial applications with extended operating temperature range and wide-ranging approvals

The ZMF-20X series includes sensors & transmitters for measuring gas concentrations of various gases such as CO2, methane, propane and SF-6. This makes the sensors suitable for many applications. The ZMF-20X gas sensors are designed to be extremely rugged & suitable for use in harsh environments.

Properties