Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

41 article(s) in your cart
pos.	image	product	Configure	Actions
1		QFS-40
2		TRM-100
3		EF2...5
4		BI
5		ELH 24 V
6		TK-32X
7		TK-315
8		GSB-390
9		FluidIX Lub-6
10		PVG-399
11		XR Relais
12		SG2420
13		ES-Serie
14		KST-20 Calima
15		T209
16		T205-0.F
17		EFV2 24V
18		NP-256
19		LGW-13
20		QFSK-2X
21		TPS-Serie
22		TK-307-0
23		TPS-210 TPS-220
24		LU-180 EX
25		ZMF-100-IR
26		KST-20 Vento-RN
27		TK-308
28		MTA
29		EF2X
30		CS-11
31		ER-214
32		ViscoScope® VA-300
33		ZT-V
34		Fluidix Lub-VDT
35		KST-20 Vento
36		LU-150
37		ZT Serie
38		W-35X
39		ZT-H
40		Smart Pressostat App
41		EF2…5 24V

QFS-40 configure

1 Anschluss

2 Gehäusematerial

3 Kabelmaterial

4 Kabellänge

Amount

additional infomation

TRM-100 configure

1 Material

2 Measuringrange

3 Connection

4 Flange

5 Sealing

Amount

additional infomation

EF2...5 configure

1 Elektrodenanzahl

2 Verschraubungsmaterial

3 Stabmaterial

4 Stabdurchmesser

5 Elektrodenbeschichtung

6 Anschlussgewinde

7 Kabelbruchwiderstand

8 Auswerteelektronik

9 Stablänge

10 SIL2

Amount

additional infomation

BI configure

1 Kontaktart

2 Kabelart

3 Kabellänge

4 Befestigung

Amount

additional infomation

ELH 24 V configure

1 Stabmaterial

2 Anschluss

3 Kabellänge

4 Kabelbruchwiderstand

5 Sondenkörper-Durchmesser

6 Anschlussgewinde

7 Sondenkörper-Material

8 Kabelmaterial

9 Auswerteelektronik

Amount

additional infomation

TK-32X configure

1 Ausführung

2 Leuchtdiode

Amount

additional infomation

TK-315 configure

1 Gehäuse

2 Eingang

Amount

additional infomation

GSB-390 configure

1 Mediumsdichte

Amount

additional infomation

PVG-399 configure

1 Ausführung

Amount

additional infomation

XR Relais configure

1 Kanalanzahl

2 WHG

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Versorgungsspannung

7 Busanschluss

8 SIL

9 ATEX

Amount

additional infomation

ES-Serie configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

additional infomation

KST-20 Calima configure

1 Innensensor

2 Außensensor

Amount

additional infomation

EFV2 24V configure

1 Sicherheitsfunktion

2 Verstellbar

3 Elektrodenanzahl

4 Verschraubungsmaterial

5 Stabmaterial

6 Anschluss

7 Anschlussgewinde

8 Kabelbruchwiderstand

9 Auswerteelektronik

10 Standaufnehmerlänge

11 SIL

Amount

additional infomation

NP-256 configure

1 Ausführung

2 Staurohr-Anzahl

3 Anschlussgewinde

4 Druckschalter

5 Kontakt

6 Längen

Amount

additional infomation

QFSK-2X configure

1 Schwimmertyp

2 Anschlussgewinde

3 Schwimmeranzahl

4 Stablänge

5 EX

Amount

additional infomation

TK-307-0 configure

1 Anschluss

2 Rohrlänge

3 Auflösung

4 Explosionsschutz

5 Zubehör

Amount

additional infomation

TPS-210 TPS-220 configure

1 Ausgangssignal

2 Schutzkappe

Amount

additional infomation

LU-180 EX configure

1 Typ

Amount

additional infomation

ZMF-100-IR configure

1 Output signal

2 Measuring range

Amount

additional infomation

TK-308 configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

MTA configure

1 Außendurchmesser

2 Seilsicherung

3 Seil

4 Schwimmer

Amount

additional infomation

EF2X configure

1 Typ

2 Anschluss

3 Rohrmaterial und Anschlußkopf

4 Stabmaterial

5 Elektronikteil

Amount

additional infomation

ER-214 configure

1 Gehäuse

2 Ausgang

3 Schaltverzögerung

4 Empfindlichkeitsbereich

5 Versorgungsspannung

6 Quittiertaster

Amount

additional infomation

ViscoScope® VA-300 configure

1 Viscosity

2 Temperature

3 Process-Connection

4 Material

5 Non-active-Extension

6 Ex-Bereich

Amount

additional infomation

ZT-V configure

1 Measuring range

2 Output signal

3 Connection

4 Process connection

Amount

additional infomation

Fluidix Lub-VDT configure

1 Signalausgang

2 Messbereich

Amount

additional infomation

KST-20 Vento configure

1 Innensensor

2 Außensensor

Amount

additional infomation

LU-150 configure

1 Typ

Amount

additional infomation

W-35X configure

1 Anschlussmaterial

2 Rohrmaterial

3 Flanschgröße

4 Mittenentfernung

Amount

additional infomation

ZT-H configure

1 Measuring range

2 Output Signal

3 Electrical connection

4 Process connection

Amount

additional infomation

EF2…5 24V configure

1 Sicherheitsfunktion

2 Elektrodenanzahl

3 Verschraubungsmaterial

4 Stabmaterial

5 Stabdurchmesser

6 Elektrodenbeschichtung

7 Anschlussgewinde

8 Kabelbruchwiderstand

9 Auswerteelektronik

10 Stablänge

11 SIL

Amount

additional infomation

QFS-40

Built-in float level switch

The QFS-40 built-in float switch is designed for low-cost monitoring of liquids in containers.

Technical Data

Switch housing : PPH| PVDF
Seal : NBR (PPH) | FPM (PVDF)
Operating temperature : PPH max. 80 °C| PVDF max. 100 °C
Operating pressure : max. 10 bar
Mounting position : horizontal (±30° von der Horizontalen)
Contact assembly : Schliesser-, Öffnerkontakt (je nach Einbau)
Electrical connection : PVC-Kabel
Switching capacity : max. 230 V AC/DC| max. 40 VA, max. 2 A
Contact resistance : max. 80 mW
Min. electric strength : 400 V DC / 1 s
Inductive/capacitive loads : Unbedingt Kontaktschutz vorsehen
fluid density : PPH > 0,6 kg/dm³ | PVDF > 0,95 kg/dm³
Protection class : IP 68

Connections

external installation : G ½"
internal installation : M16

TRM-100

Turbidimeter (0...1.000 FNU or 500...4.000 FAU)

The turbidimeter TRM-100 is a compact device for measuring turbidity in liquids. The "turbidity" is measured using the scattered light method (angle 90 degrees) for the turbidity range of < 1,000 FNU (Formazine Nephelometric Units) and the transmitted light method (angle 0 degrees) for the turbidity ranges > 1,000 FAU (Formazine Attenuation Units).

Properties

Operating pressure : max. 10 bar @ 20 °C | max. 2,5 bar @ 60 °C
Measuring range : 500...4.000 FNU / FAU
Measuring accuracy : +/-5 %
Mounting position : horizontal
Process connection : DN 20 | DN 40
Flange connection : >= DN 20
number of senders : 2
number of receivers : 1

Material

Seal : EPDM | optional FPM (Viton)
Process connection : PVC | PPH
Measuring tube : Borsilikatglas mit Nano Beschichtung

Input

Power supply : 18...30 V DC
Power consumption : < 2 W

Output

Output contact : 4...20 mA
Switching delay (adjustable) : 1...10 s
Protection class : IP 65
Switching voltage : max. 250 V AC | max. 115 V DC
Switching current : max. 3 A
Switching capacity : max. 500 VA, 60 Watt
Potential-free changeover contact : 1 @ 1...10 s

EF2...5

Conductive Electrodes with general approval for constructions

Conductive electrodes type EF2...5 are approved by the “DIBt” (German Institute for Structural Engineering) as liquid level limit switches for the overfill protection of containers for storing water-endangering liquids

Properties

Protection class EN60529 : IP 65
connection thread : G1" | G1¼" | G1½"
Union nut : G2¾" | S 100x8
Operating temperature PE / PVC : atmospheric
Operating temperature PPH : 90°C
Operating temperature PTFE : 100°C
Operating pressure : atmospheric
Resistance value of line monitoring : 22 kΩ / 100 kΩ
Spacer form length > 1000 mm : 1 per 1000 mm
rod length : max. 6.000 mm
Rod diameter : 4mm | 6 mm

Material

Screw connection : PPH | PE | PVC | PTFE
Sensor rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal
Coating : PTFE
ltdata. :

BI

Bistable Switch

Properties

Protection class : IP 65
Switching current : max. 1 A
Switching voltage : max. 24 V
Switching capacity : max. 20 W/VA

Material

Housing : Messingrohr Ø 10 x 1
Cable : TPK (PVC basis) | SIL (Silikon)

Operating temperature

TPK : –15 ° ... + 60 °C
SIL : –15 ° ... +130 °C

ELH 24 V

Hanging electrode as leakage probe 24 V DC

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

General data

Protection class : IP 68
Probe body material : PE, PVC, PPH, PVDF
Diameter probe body : 15 mm, 25 mm, 40 mm
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ

Material

Screw connection : PVDF
Cable : TPK ( PVC Basis)
on request : FEP (Teflon), PVC - blau
cable length : auf Wunsch (Standard 3 m)
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Glas-Kohlestifte

TK-32X

Luminous Row Displays

Luminous row displays of type series TK-320...TK-322 are used for visually displaying process states such as filling levels.

Type

TK-320 : Schaltschrankeinbaugehäuse 24 x 96 mm
TK-321 : Schaltschrankeinbaugehäuse 24 x 96 mm
TK-322 : 19” Karteneinschub 7 TE, 3 HE

Properties

Protection class EN60529 : IP 52
Operating temperature : – 20 °C...+60 °C
nominal voltage : 24 V DC...230 V AC
Input : 0(4)...20 mA | 0(2)...10 V DC | 5...10kΩ
Output : 4...20 mA | Bürde max. 500 Ω
Relay : 2 x Umschalter max. 230 V | min. 5 V | max. 3 A | min 1 mA

Display

Number of LEDs : 33 (rot/grün); 32 (TK-322)
Resolution : ca. 3,5 %
Error : ± 1 LED
connection : Schraubklemmen
connection TK-322 : Steckerleiste
Input : 0(4)...20 mA | 0(2)...10 V DC | 5...10kΩ
Output : 4...20 mA | max. load 500 Ω
Relay(2xSwitch) : max. 230 V | min. 5 V
Relay(2xSwitch) : max. 3 A | min. 1 mA

TK-315

Evaluation unit with 4 limit contacts (NO-contacts)

The TK-315 limit comparator can be used in conjunction with our TK-30... continuous level sensors with 0(4)...20 mA or 0...10 V output signal for level control/measurement.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
nominal voltage : 24... 230 V AC/DC
Power consumption : 2 VA
Dimensions housing type B : 22,5 x 114,5 x 99 mm
Dimensions housing type C : 22,5 x 114,5 x 114 mm

Input

power : 0/4...20 mA
Voltage : 0...10 V
Resistance in three-wire circuit RG : 0–4...10 kΩ

Output

Output contacts : 4 Schließerkontakte
Switching voltage : max. 250 V AC
Switching current : max. 3 A
Switching capacity : max. 500 VA
Temperature influence tolerance : max. ± 0,6 % der Signalspanne
Mounting : Tragschiene nach EN 50022
Current output : 4...20 mA bezogen auf die Masse des Eingangs
Display (%) : 2-stellig, 7-Segment
Weight : 175 g

GSB-390

Glass float with magnet insert

for actuating monostable and bistable contacts

Variants

150 : AußenØ 26,5 x 150 mm (2 Magnete für monostabile Kontakte) Gewicht ca. 50 g
190 : AußenØ 26,5 x 190 mm (2 Magnete für monostabile Kontakte) Gewicht ca. 61 g
205 : AußenØ 26,5 x 205 mm (3 Magnete auch für bistabile Kontakte) Gewicht ca. 69 g

FluidIX Lub-6

Inline-capable oil condition sensor based on a multi-channel infrared measuring cell for permanent monitoring of the oil condition and prevention of machine damage

Based on non-dispersive infrared technology (NDIR), ZILA GmbH has developed an inline-capable measuring system that permanently monitors the oil condition directly in the system. The optical measuring system consists of a multi-channel infrared measuring cell with associated electronics and peripherals.

General information

Housing : Robustes Aluminiumgehäuse
Operating voltage : 18...36V DC (max. 400 mA @18V)
Dimensions : 150 x 119 x 82 mm (L x B x H)

Operating conditions

Operating temperature: : 0...+70 °C (optional 0...+90 °C)
Maximum operating pressure: : 10 bar (optional 30 bar)
Storage temperature: : -40...+90 °C

Connection

ModBus TCP/IP : Ethernet-Port für Kommunikation über herstellerunabhängiges Busprotokoll
Digital I/O ports : 1x Digital In 18...36V (10 mA max.), 4x Digital Out 18...36V (5 mA max.)

Operation

User Interface : grafisch über Weboberfläche im eingebundenen Netzwerk

PVG-399

PVC weight with magnet insert and eyelet for cable fixing

for actuating monostable and bistable contacts

Variants

32 : Außen Ø 25 mm x 175 mm, Gewicht ca. 180 g, geeignet für Rohraußen Ø 32 u. 34 mm bis 6m Länge
37 : Außen Ø 30 mm x 170 mm, Gewicht ca. 180 g, geeignet für Rohraußen Ø 40 mm bis 6m Länge
40 : Außen Ø 40 mm x 110 mm ca. 175g, geeignet für Rohraußen Ø 50 mm bis 6m Länge
4012 : Außen Ø 40 mm x 110 mm ca. 300g, geeignet für Rohraußen Ø 50 mm bis 12m Länge
4016 : Außen Ø 40 mm x 110 mm ca. 360g geeignet für Rohraußen Ø 50 mm bis 16m Länge
50 : Außen Ø 50 mm x 130 mm ca. 255g, geeignet für Rohraußen Ø 63 mm bis 6m Länge
5012 : Außen Ø 50 mm x 130 mm ca. 300g geeignet für Rohraußen Ø 63 mm bis 12m Länge
5016 : Außen Ø 50 mm x 130 mm, ca. 360g, geeignet für Rohraußen Ø 63 mm bis 16m Länge

XR Relais

Electrode relays and contact protection relays

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised. The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Weight : ca. 170g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

SG2420

Supply unit SG2420 for flow sensor

The DSM-2420 sensor can only be operated in hazardous areas with the associated SG2420 power supply unit or appropriately designed, approved Zener barriers.

Properties

Housing : Kunststoff
Protection class : IP00
Ambient temperature : -20…+60°C
Supply voltage : 24V DC +20% / -10%

ES-Serie

electronic safety switching device

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

KST-20 Calima

Climate control for automatic & controlled dehumidification, ventilation and cooling of rooms

The KST-20 Calima climate control system with aH-Controlled technology for ventilation and dehumidification for all types of private, commercial and industrial rooms. With the operating modes for living room ventilation and room dehumidification, the KST-20 Calima can be used flexibly in almost all living, working and industrial areas.

Specifications

measuring range (Humidity) : 0…100% rF,
Measuring accuracy (humidity) : ±2%
measuring range (Temperature) : -40…+80°C
Measuring accuracy (temperature) : ±0,2°C
Signal output : I2C
Connections for actuators : Zwei Steuer- und Schaltausgänge für Zuluft- und Abluftelemente
Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 140x140x46 mm

Connection options

Dehumidification : Einstufige Lüftungsventilatoren
Room dehumidification / living space ventilation : Zweistufige Lüftungsventilatoren
Living space ventilation / Dehumidification : Drehzahlgesteuerte Ventilatoren 0…10 V DC

Operating conditions

Temperature : 0...50 °C
RelativeHumidity : 85 % nicht kondensierend
EMV/ESD : EN50082-1/2

T209

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

T205-0.F

Ex area zone 0 (category 1)

The magnetic immersion probes T20... are used to detect fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (cat. 1) is present in the gas space above the liquid and Ex zone 1 (cat. 2) is present outside the container, in the area of the junction box.

Properties

Protection class EN60529 cable : IP 68
connection cable : max. 10 Meter PUR
Sliding tube length : Max. 6000 mm
Operating temperature : max. 120 °C
F-Contact : 1 / 12 kΩ

Float

Stainless steel ball 44 mm Ø : max. 15 bar | 0,60 g/cm³
Stainless steel cylinder 27 mm Ø : max. 10 bar | 0,78 g/cm³

EFV2 24V

adaptive conductive electrodes with and without 24 V direct connection

The conductive electrode EFV2 is approved by the "DIBt" as an overfill prevention device for liquids hazardous to water.

Connection

Box : Polyesterdose (PO)
Cable : Kabel (TPK)
Plug : Stecker (ST)

Properties

Protection class : IP 65
connection thread : G2"
Union nut : G2¾", S 100x8
Material Screw connection : PE, PVC, PPH, PVDF
Material Sensor rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal, Kohlestifte
Operating temperature : PE, PVC: atmosphärisch PPH : 90 °C, PVDF: 100 °C
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ je nach Ausführung

Operating temperature

PE : atmosphärisch
PVC : atmosphärisch
PPH : 90 °C
PVDF : 100 °C

Technical specifications electronic part

Operating temperature : –20...+85 °C
Storage temperature : –30...+85 °C
nominal voltage : 24...30 V DC
Power consumption : max. 2 W
Switching voltage : max. 230 V AC / V DC min. 5 V DC (CMOS-Relais)
Switching current : max. 0,12 A AC / A DC min. <1 mA
Switching capacity : max. 25 VA / W
Sensitivity : 3k … 100 kΩ

NP-256

Level Switch - multiple 2...4 - pneumatic (hose)

very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated

Properties

Protection class EN60529 : IP 54
connection thread : ab G2”
Union nut : ab G2¾”
Container connection flange : ab DN 25
HoseØ : 13x2 mm
Operating temperature : +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching capacity : 500 VA
Switch-on point (Viton membrane) : 150 mm WS ±30 mm
Switch-off point (MembraneViton) : 90 mm WS ±30 mm

Material

Hose : PVC
Screw fitting/grommet : PVC
flange : PVC
Connection head : PVC

Switching voltage

silver : max. 250 V AC
Gold : max. 24 V AC

Switching current

silver : max. 6 A
Gold : max. 100 mA

LGW-13

CO2 sensor for measuring room air quality with visual and acoustic warning signal output

Multifunctional CO2 sensor with LED display and acoustic alarm, equipped with switching functions for both industrial and private applications (0...3.000ppm)

Product features

Product type : CO2-Sensor zur Bewertung und Überwachung der Luftgüte
Measuring principle : Basierend auf optischem Messprinzip (NDIR)
Measuring range : Lieferbar in unterschiedlichen Messbereichen (Standard 0…3.000ppm)
Display : Darstellung der CO2-Konzentration mittels Bargraphanzeige (Luftgüteampel)
Switching output : Einstellbarer potentialfreier Schaltausgang
Signal output : 4...20 mA und 0...10 V Signalausgang (nur bei der Variante L)
Alarm : Akustischer Alarmmelder (je nach eingestellten CO2-Grenzwerten)
further function : Integrierte Funktionsüberwachung
Housing : Kompaktes IP 20 Wandgehäuse (Polycarbonat, weiß)
Extension : Mögliche Erweiterung um Temperaturmessung
Assembly : Erhältlich als Tischgerät mit Netzteil oder zur Wand- & Aufputzmontage ohne Netzteil

Technical specifications

Standard measuring range: : 0…3.000ppm
Optional measuring ranges: : 0…1% vol, 0…3% vol (weitere auf Anfrage)
Accuracy : +-3% vom Messbereich (30 ppm bei 3.000 ppm)
Relay output: : Potentialfrei
Response time : ca. 20 s
Operating voltage : 24 V DC, 150 mA

QFSK-2X

Stainless steel float switch combination

Float switch combinations QFSK for level monitoring & level control with maximum and minimum contact sensor.

Properties

Protection class EN60529 : IP 68
Material Float : VA 1.4571
Material hose : Edelstahlwellschlauch (1.4404) mit Edelstahldrahtumflechtung (1.4301)
rod length : max. 5 m
Number of floats : bis 5
Operating temperature : max. + 150 °C
media density : ρ ≥ 0,8g/cm³
Switching system : Reed-Schalter
Contact : Wechsler, NO, NC
Switching voltage : 4...250 V AC/DC
Switching current : 1 mA ...1 A
Switching capacity : max. 1A, 60 VA/60 W
Switching hysteresis : ca. 100 mm
Switching angle : ca. + 20° / – 20°
Ex-protection : optional; IBExU10ATEX 1089
Operating pressure WFSK-25 : max. 15 bar
Operating pressure QFSK-26 : max. 6 bar

TPS-Serie

Sensors for determining the dew point in a wide range of applications

The dew point sensors of the enable direct measurement of the dew point and ambient temperature indoors and outdoors.

Operating conditions

Temperature: : -40...80°C
rel. Humidity : 0 - 100% rH

Measuring range

measuring range (dew point) : -50...+80°C
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V oder 4...20mA

TK-307-0

Stainless steel level sensor for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

General data

Connection aluminium box : H30 x B50 x T45 mm
Connection polyester box : H56 x B80 x T75 mm
connection cable : 1000 mm PUR blau
Protection class Socket : IP65
Material Sliding tube : VA 1.4571
Material of the angle fastening : VA 1.4408
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm
Mounting : 2 Schlauchschellen
Accessories : R/I-Wandler TK-101

TPS-210 TPS-220

Flexible, analogue dew point sensor

The dew point sensors of the enable direct measurement of the dew point and ambient temperature indoors and outdoors.

Properties TPS-210

Operating voltage : 12...30V DC
Power consumption : < 15mA

Properties TPS-220

Operating voltage : 24V DC
Loop voltage min: : Bürde(Ohm) *0,02 + 8 V
Loop voltage max: : 30V

General properties

Housing : Aluminium, eloxiert
Dimensions (in mm) : 135 x Ø 19,2

Measuring range

measuring range (Humidity) : 0…100% rH
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -50...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V | 4...20mA

LU-180 EX

Compact Ultrasonic Level Sensor

The LU-150 is a short-range integrated ultrasonic level transmitter, intrinsically safe as Ex-version LU-180. This general purpose, 2 wire, 4 to 20 mA loop powered transmitter is ideal for liquids, slurries, and bulk materials in open or closed vessels to 5 m (16.4 ft).

Properties

Protection class EN60529 : IP 68
Power supply : 12...30 V DC / 0.1A Spitze
Power consumption : Max. 0,75 W (25 mA bei 24 V DC)
Output : 4...20 mA
Max. Load : 600 Ω bei 24 V DC
Measuring span : Proportional oder umgekehrt proportional
Measurable materials : Flüssigkeiten, Schlämme, Schuttgüter
operating temperature : –20...+60 °C
Opening angle : 12°
working pressure : Atmosphärisch
Display : 3-stelliges LCD
Process connection : Gewinde G 2" (BSPP) EN 10226 PVDF
Weight : 1,3 Kg
Cable entry : Kabelverschraubung M 20 x 1.5
Material housing electronics : Polybutylenterephthalat PBT
Material sensor / thread : PVDF-Copolymer

Input

Measuring range : 0,25...5,0 m
frequency : 54 kHz

Measuring Accuracy

Measurement deviation : ± 0,25 % vom Messbereich (in Luft)
Resolution : 3 mm
Temperature compensation : im Sensor integriert
Echo processing : „Sonic Intelligence“ von Siemens

ZMF-100-IR

gas detector with 4...20mA signal output

industrial CO2 sensor ZMF-100-IR with a measuring range of up to 50,000ppm

Product features

Measuring principle : optisch, NDIR (nicht-dispersive Infrarot-Absorptionsmessung)
Operating voltage : 24 V DC / 100 mA
Heating time : ca. 5 min
Response time : ca. 30 s
Repeatability : +/- 1%
Housing : Aluminium (rot) IP54
Weight : ca. 500g
Shaft range : 4,27 - 4,35 µm (4270-4350 nm)
Gas ingress : per Diffusion

ambient conditions

Operating temperature range : -10...+50 °C
Storage temperature range : -40...+100 °C
RelativeHumidity : 15..95 %
Air pressure : 900...1100 hPa

KST-20 Vento-RN

Climate control with aH-Controlled technology and Rn-Protected seal

The KST-20 Vento/RN is a climate control unit with aH-Controlled technology and Rn-Protected seal for ventilation and dehumidification of all types of private, commercial and industrial rooms. With the three operating modes for ventilation, dehumidification and radon measurement, the KST-20 Vento climate control unit can be used flexibly in almost all living, working and industrial areas.

Properties

Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 160 x 90 x 50 mm
Housing : hochwertigem ASA+PC (UL 94 V-0) für harte Beanspruchung, flammwidrig und selbstverlöschend
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100 % rF
Measuring accuracy (humidity) : ±2 %
measuring range (Temperature) : -40…+80 °C
Measuring accuracy (temperature) : ±0,2 °C
measuring range (radon) : 0...1200 Bq/m³
Adjustable limits : 80...1000 Bq/m³

TK-308

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 11,12, 15, 17
connection cable : 1000 mm LiYY 0,5 mm² oder Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating pressure : max. 6 bar
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

Operating temperature

PVC : max. 60 °C
PE : max. 80 °C
PP : max. 90 °C

MaterialDensity

Type 11 : 0,60 g/cm³
Type 12 : 1,00 g/cm³
Type 15 : 0,59 g/cm³
Type 17 : 0,63 g/cm³

MTA

Mechanical tank level indicator

The tank level indicator is a mechanically actuated indication operating "on the spot”. It permits a high degree of safety and flexibility thanks to separate points of measurement and indication.

Properties

Tank connection : Flansch ab DN 80 (Sonderanschlüsse auf Wunsch)
Material : siehe Maßbild
Material Tube : PVC, transparent | Ø 50 x 1,8 | Ø 63 x 3,0
Operating temperature : –20...+60 °C
Operating pressure : atmosphärisch

Material Float

PPH : Ø 70 mm 460 g
PVC : Ø 70 mm 455 g
PPH : Ø 40 mm 370g
PE : Ø 70 mm ca. 450 g

Material Rope

PPH : (rot, Ø 2 mm) ~ 2 g/m
Polyester : (bunt, Ø 2 mm) ~ 4 g/m
PTFE : (weiss, Ø 3 mm) ~ 10 g/m

EF2X

Double pipe and filling pipe monitoring

EF2L and EF2T -conductive- with general technical approval for construction Z-65.13-405

Properties

Electrical connection : Stecker GDM
Protection class EN60529 : IP 65 mit Dichtung
connection : PVC Überwurfmutter G 1 ¼“
PVC : max. +60 °C
PE : max. +80 °C
Storage temperature : -30...+85 °C
Operating pressure : max. 6 bar

Material

Pipe : PVC | PE
Sensor rods : Edelstahl 1.4571 | Hastelloy B/C | Titan | Tantal

tdata.ElektronikteilET-473L|ET-473T

nominal voltage : 20...30 V DC
Power consumption : 1 VA
Output contact : Schließer | Öffnerkontakt (NO/NC) (nicht potentialfrei)
Switching voltage : 12...30 V DC
Switching current : max. 300 mA
Switching capacity : max. 9 W
Sensitivity range : 2...30 kOhm
ltdata. :

CS-11

CO2 Sensor with digital Interface

Digital CO2 sensor CS-11 for measuring carbon dioxide concentration in mobile applications.

Properties CS-11

Measured variable: : CO2
Measuring range: : 0…5.000 ppm
Measuring principle: : optisch, NDIR
Housing : Kunststoff
measuring grid : 2 sec.
Accuracy : ± 50 ppm
Protocol : I²C-Bus
Operating conditions Temperature : -0°C … 50°C
Operating conditions Humidity : 0…85 % rH
Storage conditions Temperature : -30°C … 70 °C
Storage conditions Humidity : 0…85 % rH

Properties MV-CAN

Housing : Plastik
Mounting : Hutschienenmodul für Einbau in Schaltschrank
Operating voltage : 10…48 V
measuring grid : 2 sec.
CAN protocol : CANopen 2.0 A nach CiA DS 404
Physical Layer : nach ISO 11898
Option : Bereitstellung des EDS-Files
Operating temperature : -40°C … +80°C
Storage temperature : -40°C … +120 °C

ER-214

Electrode Relays

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
Storage temperature : –30...+80 °C
AC nominal frequency : 48...62 Hz
Power consumption : max. 1 W / VA
Weight : ca. 150 g

Input

Open circuit voltage : ≤ 10 V AC
Short-circuit current : ≤ 5 mA

Output

Contacts : 1 potentialfreie Wechselkontakte pro Kanal
Switching voltage : min. 5 V | max. 250 V AC | max. 150 V DC
Switching current : min. 5 mA | max. cosφ=1 3A | max. cosφ=0,7 1 A/AC | max. cosφ=1
Switching capacity : min. 300 mW | max. 750 VA / 150 W (30 V DC / 5 A) / 18 W (150 V DC / 0,12 A)
Working / Idle current : umschaltbar
overvoltage category : EN 61010-1 Kategorie III

ViscoScope® VA-300

Maintenance-free inline process viscometer for real-time viscosity measurement

The ViscoScope® sensors are made of high-quality, first-class stainless steel and impress with their intelligent, robust design.

Properties

Protection class : IP65
Material : 1.4571 / 1.4404 (316Ti / 316L)
Process temperature : -40°C … +450°C
Process pressure : Vakuum ... 450 bar
Process connections : DIN Flansch | ANSI Flansch | NPT | Varivent® | Tri-Clamp
Cable length sensor - transmitter : max. 1.000m
max. flow velocity : 10 m / sec
Ex approval : (optional) II 1/2G Ex ia IIC T6...T3 Ga/Gb
Material (optional) : Hastelloy C22, Duplex 2205, Teflon

Sensor types

big cylinder : VA-300L
small cylinder : VA-300M
Sphere : VA-300H
small sphere : VA-300X

Measuring range

VA-300L : 0,1 - 2.500 mPa·s x g/cm³
VA-300M : 1 - 25.000 mPa·s x g/cm³
VA-300H : 0,01...250 Pa·s x g/cm³
VA-300X : 0,1...2.500 Pa·s x g/cm³

Probe dimensions

VA-300L : Ø 32 x 190 mm
VA-300M : Ø 32 x 165 mm
VA-300H : Ø 32 x 130 mm
VA-300X : Ø 19 x 115 mm

ZT-V

Reliable pressure measurement and optimum process monitoring with the ZT series

From low to high pressure and suitable for liquid and gaseous media.

Connection

Signal output : 0...10 V, 3-Leiter | 0,5...4,5, ratiometrisch | 4...20 mA, 2-Leiter
Electrical connection : DIN EN 175301-803 A | DIN EN 175301-803 C | Binder M12x1 (Serie 713)
Process connection : G 1/4" ISO 1179-2 (Male Form E) | 1/4" NPT | 7/16" 20 UNF Male
measuring range (bar) : 0…0,6 | 0…600

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40°C...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

Fluidix Lub-VDT

Oil condition sensor for permanent monitoring of mechanical properties of liquids

The FluidIX Lub-VDT enables inline monitoring of mechanical fluid properties.

Properties

CE marking : EN 61000-6-1/2/3/4
Operating voltage : 9...32 V DC
Housing material : Edelstahl
Protection class : IP 67
Dimensions : 30x90 mm
Process connection : G 3/8"
Electrical connection : M12-8 A-Coding
Weight : 150g
Measurement output : 2x 4...20mA
bus protocol : ModbusRTU, CANopen

Measured variables

Resonator frequency : 20...25 kHz
Viscosity : 1-650 cSt (mm²/s)
density : 0.5-1.5 g/cm³
Temperature : -40...+125°C
sampling rate : 1/s

Operating conditions

Temperature of the fluid : -40...+125°C
Housing temperature : -40...+100°C
oil pressure : Max. 50 bar
particle size : 250 μm

KST-20 Vento

Automatic, controlled ventilation and dehumidification as well as cooling of rooms with aH-Controlled technology*.

The KST-20 Vento is a climate control unit with aH-Controlled technology for ventilation, dehumidification and cooling for all types of private, commercial and industrial rooms. With the three operating modes for ventilation, dehumidification and cooling, the KST-20 Vento climate control can be used flexibly in almost all living, working and industrial areas.

Properties

Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 160 x 90 x 50 mm
Housing : hochwertiges ASA+PC (UL 94 V-0) für harte Beanspruchung, flammwidrig und selbstverlöschend
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100% rF,
Measuring accuracy (humidity) : ±2%
measuring range (Temperature) : -40…+80°C
Measuring accuracy (temperature) : ±0,2°C

LU-150

Compact Ultrasonic Level Sensor

Properties

Protection class EN60529 : IP 68
Power supply : 12...30 V DC / 0.1A Spitze
Power consumption : Max. 0,75 W (25 mA bei 24 V DC)
Output : 4...20 mA
Max. Load : 600 Ω bei 24 V DC
Measuring span : Proportional oder umgekehrt proportional
Measurable materials : Flüssigkeiten, Schlämme, Schuttgüter
operating temperature : –20...+60 °C
Opening angle : 12°
working pressure : Atmosphärisch
Display : 3-stelliges LCD
Process connection : Gewinde G 2" (BSPP) EN 10226 PVDF
Weight : 1,3 Kg
Cable entry : Kabelverschraubung M 20 x 1.5
Material housing electronics : Polybutylenterephthalat PBT
Material sensor / thread : PVDF-Copolymer

Input

Measuring range : 0,25...5,0 m
frequency : 54 kHz

Measuring Accuracy

Measurement deviation : ± 0,25 % vom Messbereich (in Luft)
Resolution : 3 mm
Temperature compensation : im Sensor integriert
Echo processing : „Sonic Intelligence“ von Siemens

ZT Serie

Reliable pressure measurement and optimum process monitoring with the ZT series

From low to high pressure and suitable for liquid and gaseous media.

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

W-35X

Water Level Gauge with sight glass indicator

The water level gauge is particulary suitable for all liquid media which are aggressively hot and rapidly moved in a container, but are not too much contamined.

Properties