Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

36 article(s) in your cart
pos.	image	product	Configure	Actions
1		TK-300
2		EF 3…5 24 V
3		Aero_aH100
4		MO
5		TK-301
6		T200
7		W-35X
8		DTS-CAN
9		Ex-BK
10		KST-20 Vento-RN
11		HD-100 \| HD-102 \| HD-104
12		ES-Serie
13		LU-1X0
14		T202
15		Fluidix Lub-VDT
16		QFS-40
17		ViscoScope® VA-300
18		T204
19		FDL400
20		T-200.F Ex
21		XR-4x2
22		TK-307
23		LU-180 EX
24		PPS-390
25		ELH 230 V
26		ZT-V
27		T205 PP
28		TK-304
29		T205-0
30		T201 PTFE
31		T201
32		TK-101
33		QFS-3X
34		TK-308
35		T209-0.F
36		LU-150

TK-300 configure

1 Rohr-Verschraubungsmaterial

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

EF 3…5 24 V configure

1 Sicherheitsfunktion

2 Elektrodenanzahl

3 Anschlussgewinde

4 Stabmaterial

5 Stabdurchmesser

6 Beschichtung

7 Auswerteelektronik

8 Stablänge

9 SIL

Amount

additional infomation

MO configure

1 Kontaktart

2 Kabelart

3 Kabellänge

4 Befestigung

Amount

additional infomation

TK-301 configure

1 Material Rohr und Verschraubung

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

W-35X configure

1 Anschlussmaterial

2 Rohrmaterial

3 Flanschgröße

4 Mittenentfernung

Amount

additional infomation

Ex-BK configure

1 Ex

Amount

additional infomation

HD-100 | HD-102 | HD-104 configure

1 Gehäuse

2 Messbereich

3 Ausgangssignal

4 Kabelart

5 Kabellänge

6 Abdichtung

7 Sondermesszelle

Amount

additional infomation

ES-Serie configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

additional infomation

LU-1X0 configure

1 Typ

Amount

additional infomation

Fluidix Lub-VDT configure

1 Signalausgang

2 Messbereich

Amount

additional infomation

QFS-40 configure

1 Anschluss

2 Gehäusematerial

3 Kabelmaterial

4 Kabellänge

Amount

additional infomation

ViscoScope® VA-300 configure

1 Viscosity

2 Temperature

3 Process-Connection

4 Material

5 Non-active-Extension

6 Ex-Bereich

Amount

additional infomation

T-200.F Ex configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schaltkontakte

7 Schwimmermaterial

8 Anschlussdose

9 Länge

10 EX

Amount

additional infomation

XR-4x2 configure

1 Kanalanzahl

2 WHG

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Empfindlichkeitsbereich

7 Versorgungsspannung

8 Busanschluss

9 SIL

10 ATEX

Amount

additional infomation

TK-307 configure

1 Anschluss

2 Rohrlänge

3 Auflösung

4 Zubehör

Amount

additional infomation

LU-180 EX configure

1 Typ

Amount

additional infomation

PPS-390 configure

1 Mediumsdichte

2 Magnetposition

Amount

additional infomation

ELH 230 V configure

1 Stabmaterial

2 Anschluss

3 Kabellänge

4 Kabelbruchwiderstand

5 Sondenkörper-Durchmesser

6 Anschlussgewinde

7 Sondenkörper-Material

8 Kabelmaterial

9 Auswerteelektronik

Amount

additional infomation

ZT-V configure

1 Measuring range

2 Output signal

3 Connection

4 Process connection

Amount

additional infomation

TK-304 configure

1 Gewinde

2 Schwimmerausführung

3 Anschluss

4 Rohrlänge

5 Auflösung

6 Zubehör

Amount

additional infomation

TK-101 configure

1 ATEX

Amount

additional infomation

QFS-3X configure

1 Schwimmertyp

2 Kontakt

3 Schaltkontakt

4 Hysterese

5 Kabelmaterial

6 Kabellänge

7 EX

Amount

additional infomation

TK-308 configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

LU-150 configure

1 Typ

Amount

additional infomation

TK-300

Level transducer

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Properties TK-300

connection : Polyesterdose | Aluminiumdose | Stecker nach DIN 43650
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 10 (14)
connection cable : 1000 mm LiYY 0,5 mm² oder Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating pressure : max. 6 bar
Resolution : 10 mm, 15 mm oder 1%, 2%, 5% je nach Auflösung
CE marking : siehe Konformitätserklärung

Operating temperature

PV : max. 60°C
PE : max 80 °C
PP : max. 90°C

MaterialDensity

Type 10 : 0,72 g/cm³
Type 14 : 0,72 g/cm³
Type 18 : 0,82 g/cm³

EF 3…5 24 V

Conductive electrodes with 24 V DC direct connection

The conductive electrodes EF3...5 are approved by the "DIBt" as overfill prevention devices for liquids hazardous to water.

Properties

connection : integrierter Anschlusskopf
Protection class : IP 65
connection thread : G 1¼"
Material Screw connection : PPH
Material electrode rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal
material coating : PTFE
Coating length : voll = ganzer Stab (10 mm am Stabende sind blank) teil = ca. 250 mm von oben
Rod diameter : 4 mm, 6 mm
rod length : max. 6 m
Operating temperature : 85 °C
Operating pressure : atmosphärisch
Spacer : ab Länge > 1000 mm je 1000 mm 1 Abstandshalter

Properties electronic part

Operating temperature : –20...+85 °C
Storage temperature : –30...+85 °C
nominal voltage : 24 V DC ± 15%
Power consumption : max. 2 W (Klemme A1, A2)
Switching voltage : max. 250 V AC, 150 V DC min. 5 V DC (Relais mit Kombi-Goldkontakten)
Switching current : max. 3 A AC, 3 A DC min. 1 mA
Switching capacity : max. 750 VA, 150 W
Sensitivity : 3k ... 100 kΩ in vier Stufen (3 k, 10 k, 30 k, 100 kΩ) wählbar

Aero_aH100

Exhaust air fan with integrated dehumidification control for automatic room dehumidification

Dehumidification control, including integrated indoor and outdoor climate sensor. Controlled dehumidification takes place by comparing the indoor and outdoor climate. To support room dehumidification, a ventilation fan can be directly connected and controlled via the Aero_aH 100.

Properties

Power supply : 230V~ 50Hz
power consumption : 8 W
Protection class : IPX4
flow rate : 78 m³/h bis zu 92 m³/h
color : verkehrsweiß, ähnlich RAL 9016
Material : Kunststoff
Noise level : 27 dB(A) / 32 dB(A)
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100% rF
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C

MO

Monostable Switch

Properties

Protection class : IP 65
Switching current : max. 1 A
Switching voltage : max. 24 V
Switching capacity : max. 20 W/VA

Material

Housing : Messingrohr Ø 10 x 1
Cable : TPK (PVC basis) | SIL (Silikon)

Operating temperature

TKP : –15 ° ... + 60 °C
SIL : –15 ° ... +130 °C

TK-301

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 05 (06)
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Operating pressure : max. 20 bar
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm| 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 05 : 0,81 g/cm³
Type 06 : 0,67 g/cm³

T200

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

W-35X

Water Level Gauge with sight glass indicator

The water level gauge is particulary suitable for all liquid media which are aggressively hot and rapidly moved in a container, but are not too much contamined.

Properties

Tank connection : Flansch ab DN 25 oder Verschraubung ab G ½"
Material Float : PPH max. 2,5 bar, Glas max. 10 bar
cable length : bei monostabilem Kontakt: Standard 2 m
Number of contacts : beliebig
Contact distance : min. 10 mm
Temperature of the fluid : mit Plexiglasrohr max. +70 °C
media density : ρ ≥ 0,95 g/cm³ | ρ ≥ 0,85 g/cm³ (auf Wunsch)

Properties W-350

Material tube sight glass : transparentes PVC
Temperature of the fluid : max. +60 °C
Operating pressure : max. 2,5 bar
Material flange : PVC
Material connection with angle valve : PVC
Material sealing ring : Gummi

Properties W-351

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Rotguss
Material connection with angle valve : Rotguss
Material sealing ring : Silikon
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-352

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4571 als Bogen 90°
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-353

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4401
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

DTS-CAN

Flexible, digital pressure and temperature sensor with CAN bus

Media-immersed, flush-mounted, stainless steel pressure-temperature sensor with CAN bus

Properties

Operating voltage : 9...27V
Power consumption : 35 mA typ (50 mA max)
Dimensions : 75x22 mm
Process connection : G 1/4“

Measuring range

Temperature : -20…+100 °C
ltdata.Druck : (-1) 0…100 bar
ltdata.AbweichungDruck : max +/- 0,5 % FS @ 0-10°C
ltdata. :

Ex-BK

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –20...+120 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm
Dimensions : 80 mm x 75 mm x 57 mm

Material

Housing : Aluminium
Mounting clip : V2A
Rivet : V2A
Screw connection : M 20 x 1.5, V2A

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 24...250 V AC/DC
Switching current : 20 mA...6 A AC/DC
Switching capacity(min.) : max. 500 VA, 60 W
Switching capacity(max.) : min. 2 VA/W

KST-20 Vento-RN

Climate control with aH-Controlled technology and Rn-Protected seal

The KST-20 Vento/RN is a climate control unit with aH-Controlled technology and Rn-Protected seal for ventilation and dehumidification of all types of private, commercial and industrial rooms. With the three operating modes for ventilation, dehumidification and radon measurement, the KST-20 Vento climate control unit can be used flexibly in almost all living, working and industrial areas.

Properties

Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 160 x 90 x 50 mm
Housing : hochwertigem ASA+PC (UL 94 V-0) für harte Beanspruchung, flammwidrig und selbstverlöschend
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100 % rF
Measuring accuracy (humidity) : ±2 %
measuring range (Temperature) : -40…+80 °C
Measuring accuracy (temperature) : ±0,2 °C
measuring range (radon) : 0...1200 Bq/m³
Adjustable limits : 80...1000 Bq/m³

HD-100 | HD-102 | HD-104

Hydrostatic immersion probes (0.8...10mWS)

Continuous and precise level measurement in unpressurised, open basins and tanks as well as underground applications such as shafts, wells and boreholes.

Properties

Protection class EN60529 : IP68
Operating temperature : -10...70 °C (PVC: -10...60 °C)
Storage temperature : -25...70 °C (PVC: -10...60 °C)
Power supply : 15...30 V DC
power : max. 25 mA
Output : 2-Leiter-Technik
Measuring range : 0,8...10 mWs (Standard)
Overpressure : abhängig vom Messbereich
Deviation from characteristic curve : Nichtlinearität,
Insulation resistance : > 100 kΩ
Short-circuit resistance : permanent
Reverse polarity protection : keine Schädigung o. Funktion bei vertauschten Anschlüssen

Materials

Housing : Edelstahl 1.4571, PVC, PVDF
Measuring cell : Edelstahl 1.4404, Keramik Al2o3 96%, Keramik Al2o3 99,9%
Seals : FKM (Viton ®), EPDM, FFKM (Kalrez ®)
Cable : PVC, PUR, FEP (Ø8 mm; 2 x 0,25 mm2 mit Luftschlauch und PTFE-Filter

ES-Serie

electronic safety switching device

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

LU-1X0

Compact Ultrasonic Level Sensor

The LU-150 is a short-range integrated ultrasonic level transmitter, intrinsically safe as Ex-version LU-180. This general purpose, 2 wire, 4 to 20 mA loop powered transmitter is ideal for liquids, slurries, and bulk materials in open or closed vessels to 5 m (16.4 ft).

Properties

Protection class EN60529 : IP 68
Power supply : 12...30 V DC / 0.1A Spitze
Power consumption : Max. 0,75 W (25 mA bei 24 V DC)
Output : 4...20 mA
Max. Load : 600 Ω bei 24 V DC
Measuring span : Proportional oder umgekehrt proportional
Measurable materials : Flüssigkeiten, Schlämme, Schuttgüter
operating temperature : –20...+60 °C
Opening angle : 12°
working pressure : Atmosphärisch
Display : 3-stelliges LCD
Process connection : Gewinde G 2" (BSPP) EN 10226 PVDF
Weight : 1,3 Kg
Cable entry : Kabelverschraubung M 20 x 1.5
Material housing electronics : Polybutylenterephthalat PBT
Material sensor / thread : PVDF-Copolymer

Input

Measuring range : 0,25...5,0 m
frequency : 54 kHz

Measuring Accuracy

Measurement deviation : ± 0,25 % vom Messbereich (in Luft)
Resolution : 3 mm
Temperature compensation : im Sensor integriert
Echo processing : „Sonic Intelligence“ von Siemens

T202

Immersible Magnetic Probe made of stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

Fluidix Lub-VDT

Oil condition sensor for permanent monitoring of mechanical properties of liquids

The FluidIX Lub-VDT enables inline monitoring of mechanical fluid properties.

Properties

CE marking : EN 61000-6-1/2/3/4
Operating voltage : 9...32 V DC
Housing material : Edelstahl
Protection class : IP 67
Dimensions : 30x90 mm
Process connection : G 3/8"
Electrical connection : M12-8 A-Coding
Weight : 150g
Measurement output : 2x 4...20mA
bus protocol : ModbusRTU, CANopen

Measured variables

Resonator frequency : 20...25 kHz
Viscosity : 1-650 cSt (mm²/s)
density : 0.5-1.5 g/cm³
Temperature : -40...+125°C
sampling rate : 1/s

Operating conditions

Temperature of the fluid : -40...+125°C
Housing temperature : -40...+100°C
oil pressure : Max. 50 bar
particle size : 250 μm

QFS-40

Built-in float level switch

The QFS-40 built-in float switch is designed for low-cost monitoring of liquids in containers.

Technical Data

Switch housing : PPH| PVDF
Seal : NBR (PPH) | FPM (PVDF)
Operating temperature : PPH max. 80 °C| PVDF max. 100 °C
Operating pressure : max. 10 bar
Mounting position : horizontal (±30° von der Horizontalen)
Contact assembly : Schliesser-, Öffnerkontakt (je nach Einbau)
Electrical connection : PVC-Kabel
Switching capacity : max. 230 V AC/DC| max. 40 VA, max. 2 A
Contact resistance : max. 80 mW
Min. electric strength : 400 V DC / 1 s
Inductive/capacitive loads : Unbedingt Kontaktschutz vorsehen
fluid density : PPH > 0,6 kg/dm³ | PVDF > 0,95 kg/dm³
Protection class : IP 68

Connections

external installation : G ½"
internal installation : M16

ViscoScope® VA-300

Maintenance-free inline process viscometer for real-time viscosity measurement

The ViscoScope® sensors are made of high-quality, first-class stainless steel and impress with their intelligent, robust design.

Properties

Protection class : IP65
Material : 1.4571 / 1.4404 (316Ti / 316L)
Process temperature : -40°C … +450°C
Process pressure : Vakuum ... 450 bar
Process connections : DIN Flansch | ANSI Flansch | NPT | Varivent® | Tri-Clamp
Cable length sensor - transmitter : max. 1.000m
max. flow velocity : 10 m / sec
Ex approval : (optional) II 1/2G Ex ia IIC T6...T3 Ga/Gb
Material (optional) : Hastelloy C22, Duplex 2205, Teflon

Sensor types

big cylinder : VA-300L
small cylinder : VA-300M
Sphere : VA-300H
small sphere : VA-300X

Measuring range

VA-300L : 0,1 - 2.500 mPa·s x g/cm³
VA-300M : 1 - 25.000 mPa·s x g/cm³
VA-300H : 0,01...250 Pa·s x g/cm³
VA-300X : 0,1...2.500 Pa·s x g/cm³

Probe dimensions

VA-300L : Ø 32 x 190 mm
VA-300M : Ø 32 x 165 mm
VA-300H : Ø 32 x 130 mm
VA-300X : Ø 19 x 115 mm

T204

Magnetic immersion probe made of stainless steel (1.4571)

For use with highly aggressive liquid media to detect level limit values in containers. Suitable for use in hazardous areas, zone 0 (category 1).

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
connection thread : G1 1/2" | G2"
Sliding tube length : max. 6000 mm (Rohr Ø 12 mm)
Operating pressure : max. 20 bar (Kugel) | max. 15 bar (Zylinder)
Operating temperature : max. 135 °C
Number of floats : max. 4

Float type

Stainless steel ball 52mm ⌀ : Dichte: 0,75 g/cm³ | mind. Kontaktabstand: 75 mm
Stainless steel ball 62mm ⌀ : Dichte: 0,65 g/cm³ | mind. Kontaktabstand: 85 mm
Stainless steel cylinder 44 mm Ø : Dichte: 0,76 g/cm³ | mind. Kontaktabstand: 75 mm

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 4
normally open : 6
Normally closed contact : 4

FDL400

Flow Data Logger

The FDL400 "Flow Data Logger 400" measuring device is suitable for measuring the flow of water and wastewater in fully or partially filled sewers or pipes of various geometries.

Properties

Housing : Aluminium
Protection class : IP30
Dimensions : 197 x 153 x 37,5mm (B x H x T)
Temperature range : 0 – 50°C
Supply voltage : 24V DC +/-20%
Power consumption : 120mA – 220mA
Reverse polarity protection : ✓
Display : 4x20

Outputs

analog 0(4)–20mA : 3x
digital : 4x
fixed for alarm : 1x
free configurable : 3x

display of measured value

Flow velocity :
Filling level :
flow :
flow rate :

T-200.F Ex

Overfill protection for containers with Ex approval

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection

Box : Ex-Polyester
Box : Ex-Aluminium

Properties

Protection class EN60529 : IP 65
connection thread : G2"
Union nut : G 2¾"
Guide tube length : max. 6 m
Operating temperature : -20…+60 °C
Operating pressure : max. 6 bar je nach Ausführung
media density : ρ ≥ 0,72 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : 2 mm
Switching point tolerance : max. 2 mm

Resistance value

Operational readiness : ca. 1 kΩ
overfill alarm : ca. 12 kΩ
Switching time : ca. 20 ms
Ex-protection : siehe Baumusterprüfbescheinigung
CE marking : siehe Konformitätserklärung

XR-4x2

Electrode relay with ATEX and WHG approval

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V, max. 250 V AC / 150 V DC
Switching current : min. 5 mA, max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW, max.100 VA / max. 50 W
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Baumusterprüfbescheinigung
Weight : ca. 170 g

TK-307

Stainless steel level sensor

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Connection housing : Aluminium H 30 mm x B 50 mm x T 45 mm
Connection socket : Polyester H 55 mm x B 80 mm x T 45 mm
Protection class socket / plug : IP 65
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Resolution depending on type : 7,5 mm | 10 mm | 15 mm | 20 mm | 1% | 2% | 5%
Mounting : 2 Schlauchschellen
Accessories : R/I-Wandler TK-101

LU-180 EX

Compact Ultrasonic Level Sensor

Properties

Protection class EN60529 : IP 68
Power supply : 12...30 V DC / 0.1A Spitze
Power consumption : Max. 0,75 W (25 mA bei 24 V DC)
Output : 4...20 mA
Max. Load : 600 Ω bei 24 V DC
Measuring span : Proportional oder umgekehrt proportional
Measurable materials : Flüssigkeiten, Schlämme, Schuttgüter
operating temperature : –20...+60 °C
Opening angle : 12°
working pressure : Atmosphärisch
Display : 3-stelliges LCD
Process connection : Gewinde G 2" (BSPP) EN 10226 PVDF
Weight : 1,3 Kg
Cable entry : Kabelverschraubung M 20 x 1.5
Material housing electronics : Polybutylenterephthalat PBT
Material sensor / thread : PVDF-Copolymer

Input

Measuring range : 0,25...5,0 m
frequency : 54 kHz

Measuring Accuracy

Measurement deviation : ± 0,25 % vom Messbereich (in Luft)
Resolution : 3 mm
Temperature compensation : im Sensor integriert
Echo processing : „Sonic Intelligence“ von Siemens

PPS-390

PPH float with magnet insert

for actuating monostable and bistable contacts

Variants

32 : AußenØ 26 x 180 mm, für RohraußenØ 32 u. 34 mm Gewicht ca. 38 g
37 : AußenØ 29,5 x 170 mm, für RohraußenØ 40 mm (PN 16) Gewicht ca. 62 g
40 : AußenØ 40 x 165 mm, für RohraußenØ 50 mm Gewicht ca. 145 g
50 : AußenØ 50 x 125 mm, für RohraußenØ 63 mm Gewicht ca. 156 g

ELH 230 V

Hanging electrode as leakage probe 24...230 V AC/DC

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

General data

Protection class : IP 68
Probe body material : PE, PVC, PPH, PVDF
Diameter probe body : 15 mm, 25 mm, 40 mm
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ

Material

Screw connection : PVDF
Cable : TPK ( PVC Basis)
on request : FEP (Teflon), PVC - blau
cable length : auf Wunsch (Standard 3 m)
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Glas-Kohlestifte

ZT-V

Reliable pressure measurement and optimum process monitoring with the ZT series

From low to high pressure and suitable for liquid and gaseous media.

Connection

Signal output : 0...10 V, 3-Leiter | 0,5...4,5, ratiometrisch | 4...20 mA, 2-Leiter
Electrical connection : DIN EN 175301-803 A | DIN EN 175301-803 C | Binder M12x1 (Serie 713)
Process connection : G 1/4" ISO 1179-2 (Male Form E) | 1/4" NPT | 7/16" 20 UNF Male
measuring range (bar) : 0…0,6 | 0…600

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40°C...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

T205 PP

Magnetic immersion probes made of PP

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 65
Number of floats : 1x Typ 12 | 1x Typ 13
connection cable : LiYY-Kabel 0,14 mm² | PVC-Litze 0,24 mm²
Operating temperature : max. 60 °C
Operating pressure : drucklos
Number of contacts : 1x Schließer / Öffner
Switching current : 1 A
Switching voltage : 250 V AC
Switching capacity : 50 W/VA

Float type

Type 12 : Zylinder PP 19 mm Ø | Dichte 0,93 g/cm³
Type 13 : Zylinder PP 25 mm Ø | 0,68 g/cm³

TK-304

Level transmitter for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class Socket : IP 65
Float type : 03, 04, 09
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar (Kugel) max. 15 bar (Zylinder)
Resolution : 7,5 mm | 10 mm
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 03 : 0,75 g/cm³
Type 04 : 0,65 g/cm³
Type 09 : 0,76 g/cm³

T205-0

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 68 Kabel
Float type : max. 4x Zylinder Edelstahl 27 mm Ø
connection cable : 1000 mm PUR Blau
Sliding tube length : max. 6000 mm
Operating temperature : max. 120 °C
Operating pressure : max. 10 bar (Schwimmer)
media density : 0,78 g/cm³
Number of contacts : max. 2 Schließer / 2 Öffner
Switching current : 1A, 2A
Switching capacity : 50 W/VA
min. contact distance with several floats : 50 mm

T201 PTFE

Immersible Magnetic Probe made of PTFE

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

T201

Immersible Magnetic Probe made of stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

TK-101

Measuring transducer (R/I-transducer)

The measuring transducer Tk101 and Tk101Ex are built directly into the connection boxes of our Liquid Level Measuring Instruments of type TK-30.

Properties

Operating temperature : -20...+60 °C
Storage temperature : -40...+80 °C
Ex-protection : siehe Zertifikat
CE marking : siehe Konformitätserklärung

Input

Resistance range in three-wire circuit : 4...10 kΩ
Measuring current : 0,8 mA @ RE = 4 kΩ
Measuring current : 0,33 mA bei RE = 10 kΩ
Measuring voltage : 3,3 V

Supply/Output

2-wire : 4...20 mA
Voltage(Um) : 11...28 V DC
Burden / load : 0...800 Ω |RBürde max = [(Um - Um min) / 0,02] Ω
Output signal in case of error : max. 24 mA

Fault influences

Max. Total error : ± 1 %
Temperature influence : -0,015 % / °C
Supply voltage influence : 0,025 % / V

Setting range

Full deflection : 60...105 %
Zero point adjustment : 0...25 %

QFS-3X

Mercury-free float switch with µ-switch

Properties

Protection class EN60529 : IP 68
Cable entry : PVC , PTFE bzw. PVDF
Conductor cross-section : 3 x 0,75 mm², PUR 3x 0,5mm²
Operating pressure cylinder : max. 1 bar
Operating pressure sphere : max. 2 bar
Switching system : µ-Schalter
Contact : Wechsler, NO, NC

Material Float

QFS-30 : PPH (Polypropylen)
QFS-31 : PPH (Polypropylen)
QFS-34 : PE (Polyethylen)

Cable

TPK : PVC Basis Ø 5,9 mm
TPKV : PVC verstärkt Ø 7,3 mm
PUR : Polyurethan Ø 5,4 mm
SIL : Silikon Ø 6,4 mm
FEP : Teflon Ø 4,0 mm
AEM : Ethylen-Acrylat-Kautschuk

Cable length between float & attachment

TPK : 70 mm
TPKV : 90mm
PUR : 100mm
SIL : 80 mm
FEP : 110 mm
AEM : abhängig vom Innenkabel

Operating temperature

TPK(V), AEM : max. + 60 °C
PUR : max. + 70 °C
Silicone,Tefloncable with PE float : max. + 80 °C
Silicone, Teflon cable with PP float : max. + 85 °C

MaterialDensity

QFS-31 : ≥≥ 0,6 g/cm³
QFS-34 : ≥≥ 0,75 g/cm³
QFS-30 TPK(V) cable : ≥≥ 0,85 g/vcm³
QFS-30 PUR cable : ≥≥ 0,95 g/cm³
QFS-30 SIL cable : ≥≥ 0,90 g/cm³
QFS-30 FEP cable : ≥≥ 0,95 g/cm³
QFS-30AEM cable : ≥≥ 0,90 g/cm³

TK-308

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 11,12, 15, 17
connection cable : 1000 mm LiYY 0,5 mm² oder Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating pressure : max. 6 bar
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

Operating temperature

PVC : max. 60 °C
PE : max. 80 °C
PP : max. 90 °C

MaterialDensity

Type 11 : 0,60 g/cm³
Type 12 : 1,00 g/cm³
Type 15 : 0,59 g/cm³
Type 17 : 0,63 g/cm³

T209-0.F

Magnetic immersion probe overfill protection for Ex zone 0 (Cat. 1)

The magnetic immersion probes T20... are used to detect fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (cat. 1) is present in the gas space above the liquid and Ex zone 1 (cat. 2) is present outside the container, in the area of the junction box.

Properties