Home
Cart

Cart

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

37 article(s) in your cart
pos.	image	product	Configure	Actions
1		T-200.L
2		ER-214
3		TK-313
4		W-35X
5		ZDT-N
6		KS-CAN-03
7		ZT-N
8		XR Relais
9		ZT-S
10		TK-32X
11		TK-30X
12		ER-104
13		T207
14		T-200.L
15		XR-4x2
16		T-20x.F 230V
17		ZMF-202e-IR
18		ZMF-203e-IR
19		EE-24
20		T205-0.F
21		EP 24V
22		ZCS-5000
23		TK-309-0
24		T20x.F
25		KG-2XX
26		TK-308
27		Aero_aH100
28		BK-3X0
29		ZMF-20x Serie
30		T209
31		TPS-410 TPS-420
32		EK-CAN
33		T203.F
34		T208
35		ZMF-100-IR
36		AD-310
37		ViscoScope® VA-100

T-200.L configure

1 Länge

2 Anschluss

3 Anschlussgewinde

4 Befestigungswinkel

5 Schwimmertyp

Amount

additional infomation

ER-214 configure

1 Gehäuse

2 Ausgang

3 Schaltverzögerung

4 Empfindlichkeitsbereich

5 Versorgungsspannung

6 Quittiertaster

Amount

additional infomation

TK-313 configure

1 Gehäuse

2 Eingang

Amount

additional infomation

W-35X configure

1 Anschlussmaterial

2 Rohrmaterial

3 Flanschgröße

4 Mittenentfernung

Amount

additional infomation

KS-CAN-03 configure

1 Protectice Cap

Amount

additional infomation

ZT-N configure

1 Measuring Range

2 Output Signal

3 Electrical Connection

4 Process Connection

Amount

additional infomation

ZT-S configure

1 Measuring End Range

2 Output signal

3 Connection

4 Process connection

Amount

additional infomation

TK-32X configure

1 Ausführung

2 Leuchtdiode

Amount

additional infomation

TK-30X configure

1 Rohrdurchmesser

2 Rohrmaterial

3 Gewinde

4 Ausführung

5 Schwimmerausführung

6 Anschluss

7 Rohrlänge

8 Auflösung

9 Zubehör

Amount

additional infomation

XR-4x2 configure

1 Kanalanzahl

2 WHG

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Empfindlichkeitsbereich

7 Versorgungsspannung

8 Busanschluss

9 SIL

10 ATEX

Amount

additional infomation

T-20x.F 230V configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schwimmermaterial

7 Anschluss-Elektronikteil

8 Länge

Amount

additional infomation

ZMF-202e-IR configure

1 Typ

2 Temperaturbereich

3 Messmethode

4 Signalausgang

5 Messbereich

6 Ex-Zulassung

Amount

additional infomation

ZMF-203e-IR configure

1 Typ

2 Temperaturbereich

3 Messmethode

4 Signalausgang

5 Messbereich

6 Ex-Zulassung

Amount

additional infomation

EE-24 configure

1 Anschlußgewinde

2 Stabmaterial

3 Stabdurchmesser

4 Beschichtung

5 Kabelmaterial

6 Kabellänge

7 Stablänge

8 Optional:SIL

Amount

additional infomation

EP 24V configure

1 Sondenkörpermaterial

2 Stabmaterial

3 Kabellänge

4 Leitungsüberwachungswiderstand

5 Kabelmaterial

6 Ex-Zulassung

Amount

additional infomation

TK-309-0 configure

1 Gewinde

2 Schwimmerausführung

3 Anschluss

4 Rohrlänge

5 Auflösung

6 Explosionsschutz

7 Zubehör

Amount

additional infomation

T20x.F configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schaltkontakte

7 Schwimmermaterial

8 Anschlussdose

9 Länge

Amount

additional infomation

KG-2XX configure

1 Versorgungsspannung

2 Gehäuse

3 Kontakte

4 Halterung

Amount

additional infomation

TK-308 configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

ZMF-20x Serie configure

1 Typ

2 Temperaturbereich

3 Messmethode

4 Signalausgang

5 Messbereich

6 Ex-Zulassung

Amount

additional infomation

TPS-410 TPS-420 configure

1 Ausgangssignal

2 Gehäuse

Amount

additional infomation

ZMF-100-IR configure

1 Output signal

2 Measuring range

Amount

additional infomation

AD-310 configure

1 Grenzkontakte

2 Versorgungsspannung

3 Schnittstelle

Amount

additional infomation

ViscoScope® VA-100 configure

1 Viscosity

2 Temperature

3 Process-Connection

4 Material

5 Ex-Area

Amount

additional infomation

T-200.L

Leakage probes with general building authority approval

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

Connection

Box : Polyesterdose (PO)
Box : Polyethylen-Anschlusskopf (PE)
Cable : Kabel (TPK)
Plug : Stecker (ST)

Properties

Protection class : IP 65
Cable entry : PVDF-Verschraubung , PVC-Dichtung
Material Float : PE
Material leakage probe base : PE
Cable : TPK (PVC Basis)
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
media density : mit Schwimmer PE 52 ρ ≥ 1,05 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Resistance value

Operational readiness : ca. 1 kΩ
Leakage detection : ca. 12 kΩ

ER-214

Electrode Relays

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
Storage temperature : –30...+80 °C
AC nominal frequency : 48...62 Hz
Power consumption : max. 1 W / VA
Weight : ca. 150 g

Input

Open circuit voltage : ≤ 10 V AC
Short-circuit current : ≤ 5 mA

Output

Contacts : 1 potentialfreie Wechselkontakte pro Kanal
Switching voltage : min. 5 V | max. 250 V AC | max. 150 V DC
Switching current : min. 5 mA | max. cosφ=1 3A | max. cosφ=0,7 1 A/AC | max. cosφ=1
Switching capacity : min. 300 mW | max. 750 VA / 150 W (30 V DC / 5 A) / 18 W (150 V DC / 0,12 A)
Working / Idle current : umschaltbar
overvoltage category : EN 61010-1 Kategorie III

TK-313

Evaluation unit with 2 change over limit contacts

The TK-313 limit comparator can be used in conjunction with our TK-30... continuous level sensors with 0(4)...20 mA or 0...10 V output signal for level control / measurement.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
nominal voltage : 24... 230 V AC/DC
Power consumption : 2 VA
Dimensions housing type B : 22,5 x 114,5 x 99
Dimensions housing type C : 22,5 x 114,5 x 114

Input

power : 0/4...20 mA
Voltage : 0...10 V
Resistance in three-wire circuit RG : 0–4...10 kΩ

Output

Output contacts : 2 Wechselkontakte
Switching voltage : max. 250 V AC
Switching current : max. 3 A
Switching capacity : max. 500 VA
Temperature influence tolerance : max. ± 0,6 % der Signalspanne
Mounting : Tragschiene nach EN 50022
Current output : 4...20 mA bezogen auf die Masse des Eingangs
Display (%) : 2-stellig, 7-Segment
Weight : 175 g
ltdata. :

W-35X

Water Level Gauge with sight glass indicator

The water level gauge is particulary suitable for all liquid media which are aggressively hot and rapidly moved in a container, but are not too much contamined.

Properties

Tank connection : Flansch ab DN 25 oder Verschraubung ab G ½"
Material Float : PPH max. 2,5 bar, Glas max. 10 bar
cable length : bei monostabilem Kontakt: Standard 2 m
Number of contacts : beliebig
Contact distance : min. 10 mm
Temperature of the fluid : mit Plexiglasrohr max. +70 °C
media density : ρ ≥ 0,95 g/cm³ | ρ ≥ 0,85 g/cm³ (auf Wunsch)

Properties W-350

Material tube sight glass : transparentes PVC
Temperature of the fluid : max. +60 °C
Operating pressure : max. 2,5 bar
Material flange : PVC
Material connection with angle valve : PVC
Material sealing ring : Gummi

Properties W-351

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Rotguss
Material connection with angle valve : Rotguss
Material sealing ring : Silikon
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-352

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4571 als Bogen 90°
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-353

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4401
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

ZDT-N

Differential pressure transmitter for low pressure applications

Versatile and reliable differential pressure transmitter for measurement on air and other non-aggressive media.

Properties

Pressure type : Differenzdruck
Housing : Kunststoff mit LCD-Anzeige (optional)
Overpressure : 2,5* x Nenndruck

Measurement parameters

Total error : ± 2,5 % FS (typ. ± 0,5 %)
Linearity error : ± 1 % FS
Signal output selection : 0...10 V 4...20 mA
Pressure ranges (mbar) : 1/ 2 / 4 – 2,5 / 5 /10 – 12,5 / 25 /50 – 50 / 100 /200

Operating conditions

Operating voltage (0...10V) : 14...30 V DC
Operating voltage (4...20mA) : 12...30 V DC
Operating temperature : 0...+50 °C
Storage temperature : -20°C...+120°C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 3,5 mm oder 5,5 mm

Pressure measuring ranges

1/2/4mbar :
2,5/5/10mbar :
12,5/25/50mbar :
50/100/200mbar :
other on request :

KS-CAN-03

CANopen Climate Transmitter

Climate transmitter KS-CAN-03 for temperature and humidity measurement, according to CAN bus specifications with a digital climate probe

Properties

Housing : Aluminium, eloxiert
Measuring element humidity : kapazitiv, betauungsfest
Measuring element temperature : Halbleiter
measuring resolution : 12 Bit
measuring grid : ab 5 ms

ElectricalConnection

CAN protocol : CANopen 2.0 A, nach ciA DS 404
Physical Layer : nach DIN 11898
Option : Bereistellung des EDS-Files

tdata.

Operating temperature : -40...+80 °C
Storage temperature : -40°C...+120°C
Minimum air velocity across the sensor required for measurement : 1,5 m/s

ZT-N

Customisable low pressure sensor for precise measurement of the smallest pressures

Reliable low pressure sensor in a robust and compact design

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

XR Relais

Electrode relays and contact protection relays

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised. The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Quiescent current : umschaltbar
Weight : ca. 250 g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

ZT-S

Functionally safe pressure transmitter for ES series

Reliable pressure measurement and optimal process monitoring thanks to the ZT series. Developed for high demands and safety-critical applications

Properties

Operating voltage : 12...32 V DC (max. 0,2 W)
Dimensions : Ø 22 x 59 (D x H), SW22
Housing : Edelstahl
Measuring range nominal pressure : -1…500 bar
Overpressure : 2 x Nenndruck
Bursting pressure : 4 x Nenndruck
Protection class : IP65
Output signal : ZILA-DIO

Operating conditions

Pressure type : Relativdruck
Temperature of the fluid : -40 …+125 °C
fluid temperature (optional) : -20 …+125 °C
Ambient temperature : -40 …+105 °C

electrical connection

Standard : Binder M12 x 1

TK-32X

Luminous Row Displays

Luminous row displays of type series TK-320...TK-322 are used for visually displaying process states such as filling levels.

Type

TK-320 : Schaltschrankeinbaugehäuse 24 x 96 mm
TK-321 : Schaltschrankeinbaugehäuse 24 x 96 mm
TK-322 : 19” Karteneinschub 7 TE, 3 HE

Properties

Protection class EN60529 : IP 52
Operating temperature : – 20 °C...+60 °C
nominal voltage : 24 V DC...230 V AC
Input : 0(4)...20 mA | 0(2)...10 V DC | 5...10kΩ
Output : 4...20 mA | Bürde max. 500 Ω
Relay : 2 x Umschalter max. 230 V | min. 5 V | max. 3 A | min 1 mA

Display

Number of LEDs : 33 (rot/grün); 32 (TK-322)
Resolution : ca. 3,5 %
Error : ± 1 LED
connection : Schraubklemmen
connection TK-322 : Steckerleiste
Input : 0(4)...20 mA | 0(2)...10 V DC | 5...10kΩ
Output : 4...20 mA | max. load 500 Ω
Relay(2xSwitch) : max. 230 V | min. 5 V
Relay(2xSwitch) : max. 3 A | min. 1 mA

TK-30X

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Properties

connection : Polyesterdose | Aluminiumdose | Stecker nach DIN 43650
connection thread : G 3/8”, G 1/2”, G 1”, G 1 1/2”, G 2”, G 3”
connection cable : LiYY max. 80 °C | Silikon max. 130 °C
Sliding tube length : max. 6000 mm
Operating temperature : max. +60...+130 °C | min. –20...–10 °C je nach Ausführung
Operating pressure : max. 20 bar je nach Ausführung
media density : siehe Schwimmerdaten
Viscosity : < 100 cp
Switching hysteresis : ca. halbe Auflösung
Resolution : 7,5 mm, 10 mm, 15 mm, 20 mm oder 1 %, 2 %, 5 % je nach Ausführung
Total resistance : ca. 5 kΩ
Measuring voltage : max. 24 V
Measuring current : max. 5 mA

ER-104

1-channel electrode relay

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
Storage temperature : –30...+80 °C
Weight : ca. 150g
ltdata. :

Power supply

nominal voltage : siehe Typenschlüssel
AC nominal frequency : 48...62 Hz
Power consumption : max. 1 W / VA

Input

Open circuit voltage : ≤ 10 V AC
Short-circuit current : ≤ 5 mA
Switching delay : siehe Typenschlüssel
Sensitivity range : siehe Typenschlüssel

Output

Contacts : potentialfreie Wechselkontakte
Switching voltage(min) : 5 V
Switching voltage (max) : 250 V AC / 150 V DC
Overvoltage category : EN 61010-1 Kategorie III

Switching current

Switching current : min. 5 mA
Switching current : max. cos φ =1 5 A
Switching current : max. cos φ = 0,7 3 A/AC
Switching current : max. cos φ = 1

T207

Magnetic immersion probes made of PPH

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

T-200.L

Leakage probes with general building authority approval

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

XR-4x2

Electrode relay with ATEX and WHG approval

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V, max. 250 V AC / 150 V DC
Switching current : min. 5 mA, max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW, max.100 VA / max. 50 W
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Baumusterprüfbescheinigung
Weight : ca. 170 g

T-20x.F 230V

Overfill protection for containers

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection

Box : Polyester

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating temperature : max. 80°C
Operating pressure : atmosphärisch
media density : ρ ≥ 0,6 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Power supply

nominal voltage : 24…230 V AC/DC
Power consumption : ≤ 2 W

Output

Output contact : 2 potentialfreie Wechselkontakte
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 5 A AC / 5 A DC
Switching capacity : max. 750 VA / 90 W
displays : Betriebs-LED grün, Funktions-LED rot
Switching delay : ca. 0,5 s Anzug/Abfall
CE marking : siehe Konformitätserklärung

ZMF-202e-IR

Robust propane gas sensor for industrial applications with extended operating temperature range and ATEX / SIL-2

The ZMF-202e-IR is a propane sensor for measuring propane concentration in harsh environments.

Properties

Operating conditions : -40 °C…+60 °C
Storage conditions : -40 °C…+85 °C
RelativeHumidity : 0…95 % nicht kondensierend
Measurement method : NDIR (dual beam technology)
Certification : SIL2, ATEX
Signal output : 4..20mA
Power supply : 12…24 V DC
Housing : Edelstahl
Standard cable length : 1,5 m
pressure conditions : 800...1200 mbar
screw thread : M46x1,5

Measuring ranges

in ppm : in vol%
0...17.000ppm : 0…1,7 vol% (100 % LEL)
0...21.000ppm : 0…2,1 vol%

Options

Other cable lengths on request :
ATEX certification (optional) :

ZMF-203e-IR

Robust sulphur hexafluoride SF6 sensor for industrial applications with extended operating temperature range and wide-ranging approvals

The ZMF-203e-IR is an SF6 sensor for measuring sulphur hexafluoride concentration in harsh environments.

Properties

Operating conditions : -40 °C…+60 °C
Storage conditions : -40 °C…+85 °C
RelativeHumidity : 0…95 % nicht kondensierend
Measurement method : NDIR (dual beam technology)
Certification : SIL2, ATEX
Signal output : 4..20mA
Power supply : 12…24 V DC
Housing : Edelstahl
Standard cable length : 1,5 m
pressure conditions : 800...1200 mbar
screw thread : M46x15

Measuring ranges

in ppm : in vol%
0...1.000ppm : 0...0,1 vol%
0...2.000ppm : 0...0,2 vol%

Options

Other cable lengths on request :
ATEX certification (optional) :

EE-24

Ex-Electrode-single with integrated safety barrier

When using a threshold detection electrode with integrated safety barrier, exceeding or falling below a threshold in conductive fluids in Ex-Zone 0 (category 1) can be detected.

Properties

connection thread : G 1/2” Standard | G 3/4” | G1”
Cable : TPK (Standard) | SIL (Silikon) | FEP (Teflon)
rod length : max. 6.000 mm
Operating pressure : max. 40 bar

Material

electrode body : Edelstahl 1.4571
Process connection : Edelstahl 1.4571
Coating : PTFE
electrode rod : Edelstahl 1.4571
on request : Hastelloy C | Tantal

T205-0.F

Ex area zone 0 (category 1)

The magnetic immersion probes T20... are used to detect fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (cat. 1) is present in the gas space above the liquid and Ex zone 1 (cat. 2) is present outside the container, in the area of the junction box.

Properties

Protection class EN60529 cable : IP 68
connection cable : max. 10 Meter PUR
Sliding tube length : Max. 6000 mm
Operating temperature : max. 120 °C
F-Contact : 1 / 12 kΩ

Float

Stainless steel ball 44 mm Ø : max. 15 bar | 0,60 g/cm³
Stainless steel cylinder 27 mm Ø : max. 10 bar | 0,78 g/cm³

EP 24V

Plate Electrode as Leak Detector (conductive)

with general approval for constructions Z-65.40-191

Properties

Protection class EN60529 : IP 68
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ
cable length : auf Wunsch

Material

Cable : TPK (PVC Basis)
Sensor rods : Edelstahl (1.4571) | Hastelloy B | Hastelloy C | Titan | Tantal | Glaskohlenstoff

Options

cable material : FEP (Teflon) | EX (PVC blau)

ZCS-5000

Self-contained CO2 sensor ZCS-5000 in small housing with warning horn

stand alone CO2 sensor for measuring and monitoring carbon dioxide concentration in ambient air.

Properties

Housing : Kunststoff
Power supply 24V : 24V DC | 230V

Measuring element and parameter

Measuring principle : optisch, NDIR
measuring grid : 2 sec.
Accuracy : ± (50ppm+3% vom Messwert) im Bereich von 300…5.000ppm CO2

Operating conditions

Operating temperature : 0…+50 °C
Storage temperature : -30 °C…+75 °C
Operating humidity : 0…85% rH (nicht kondensierend)
Storage humidity : 0…85% rH (nicht kondensierend)

TK-309-0

Stainless steel level sensor for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class Socket : IP65
Float type : Typ 07
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar
media density : Typ 07: 0,54 g/cm³
Resolution : 7,5 mm | 10mm |15 mm | 20 mm
Accessories : R/I-Wandler TK-101

T20x.F

Overfill protection for containers

Connection

Box : Polyester
Box : Aluminium
Box : Polyethylen
Box : Kabel
Box : Stecker

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating temperature : atmosphärisch; PP max. 90°C
Operating pressure : Max. 20 bar
media density : ρ ≥ 0,6 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Resistance value

Operational readiness : ca. 1 kΩ
overfill alarm : ca. 12 kΩ
Switching time : ca. 20 ms
ltdata. :

KG-2XX

Capacitiv Limit Switch

Capacitive limit switches respond on approach of solid and liquid media.

Properties KG-201

Operating voltage : 20...250 V AC
Switching version(*standard) : *Schließer | Öffner
connection : 2-Leiter
nominal voltage : 110 VAC
No-load current : typ. 2,5 mA
Min. switching current : typ. 5 mA
Max switching current : 330 mA
Max. Voltage drop with "ON" : typ. 6 V
Min. switching capacity : 0,55 V A
Max. switching capacity : 36,3 V A
Switching distance(mm) : 3...30
Switching hysteresis : typ. 10%
Repeatability atTa=const. : typ. 0,1 %
Drift : < 10%
Switching frequency : max. 25 Hz
Switching indicator : LED rot, eing.
Permanent short-circuit protection : nein
Permissible ambient temperature : –25...+70 °C

Properties KG-200|KG-202

Operating voltage : 20...250 V AC
Switching version(*standard) : *Schließer | Öffner
connection : 2-Leiter
nominal voltage : 220 VAC
No-load current : typ. 2,5 mA
Min. switching current : typ. 5 mA
Max switching current : 330 mA
Max. Voltage drop with "ON" : typ. 6 V
Min. switching capacity : 1,1 V A
Max. switching capacity : 72,6 V A
Switching distance(mm) : 3...20
Switching hysteresis : typ. 10%
Repeatability atTa=const. : typ. 0,5 %
Drift : < 10%
Switching frequency : max. 25 Hz
Switching indicator : LED gelb, intern
Permanent short-circuit protection : nein
Permissible ambient temperature : –20...+60 °C

properties KG-211

Operating voltage : 10...35 V DC
Permissible ripple : 10 %
Switching version(*standard) : *Schließer, Öffner
connection : 3-Leiter
nominal voltage : 24 V DC
No-load current : typ. 15 mA
Max switching current : 400 mA
Max. Voltage drop with "ON" : 2,5 V
Max. switching capacity : 14 W
Switching distance(mm) : 3...30
Switching hysteresis : < 10%
Repeatability atTa=const. : < 0,1%
Drift : < 10%
Switching frequency : max. 50 Hz
Switching indicator : LED rot, eing.
Reverse polarity protection : ja
Permanent short-circuit protection : ja
Permissible ambient temperature : –25...+70°C

Properties KG-210|KG-212

Operating voltage : 10...35 V DC
Permissible ripple : 10 %
Switching version(*standard) : *Schließer, Öffner
connection : 3-Leiter
nominal voltage : 24 V DC
No-load current : typ. 15 mA
Max switching current : 400 mA
Max. Voltage drop with "ON" : 2,5 V
Max. switching capacity : 14 W
Switching distance(mm) : 3...25
Switching hysteresis : < 10%
Repeatability atTa=const. : < 0,5%
Drift : < 10%
Switching frequency : max. 50 Hz
Switching indicator : LED gelb, intern
Reverse polarity protection : ja
Permanent short-circuit protection : ja
Permissible ambient temperature : –20...+60°C

TK-308

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 11,12, 15, 17
connection cable : 1000 mm LiYY 0,5 mm² oder Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating pressure : max. 6 bar
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

Operating temperature

PVC : max. 60 °C
PE : max. 80 °C
PP : max. 90 °C

MaterialDensity

Type 11 : 0,60 g/cm³
Type 12 : 1,00 g/cm³
Type 15 : 0,59 g/cm³
Type 17 : 0,63 g/cm³

Aero_aH100

Exhaust air fan with integrated dehumidification control for automatic room dehumidification

Dehumidification control, including integrated indoor and outdoor climate sensor. Controlled dehumidification takes place by comparing the indoor and outdoor climate. To support room dehumidification, a ventilation fan can be directly connected and controlled via the Aero_aH 100.

Properties

Power supply : 230V~ 50Hz
power consumption : 8 W
Protection class : IPX4
flow rate : 78 m³/h bis zu 92 m³/h
color : verkehrsweiß, ähnlich RAL 9016
Material : Kunststoff
Noise level : 27 dB(A) / 32 dB(A)
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100% rF
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C

BK-3X0

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –25...+70 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm

Material

Housing : Polycarbonat
Mounting clip : V2A, Kabelbinder (PP)
Rivet : V2A
Screw connection : M 20 x 1.5, Polyamid

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 5...250 V AC/DC
Switching current : 1mA...6 A AC/DC
Switching capacity(min.) : 300 VA, 60 W
Switching capacity(max.) : 5 mW

ZMF-20x Serie

Robust gas sensor for industrial applications with extended operating temperature range and wide-ranging approvals

The ZMF-20X series includes sensors & transmitters for measuring gas concentrations of various gases such as CO2, methane, propane and SF-6. This makes the sensors suitable for many applications. The ZMF-20X gas sensors are designed to be extremely rugged & suitable for use in harsh environments.

Properties

Operating conditions : -40 °C…+60 °C
Storage conditions : -40 °C…+85 °C
RelativeHumidity : 0…95 % nicht kondensierend
Measurement method : NDIR (dual beam technology)
Certification : SIL2-Zertifizierung, ATEX-Zertifizierung (auf Anfrage)
Signal output : 4..20mA
Power supply : 12…24 V DC
Housing : Edelstahl
Standard cable length : 1,5 m (weitere Längen auf Anfrage)
pressure conditions : 800...1200 mbar
screw thread : M46x1,5

T209

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

TPS-410 TPS-420

Compact, analogue dew point sensor

The dew point sensors of the enable direct measurement of the dew point and ambient temperature indoors and outdoors.

Properties TPS-410

Operating voltage : 12...30V DC
Power consumption : < 15mA
Protection class Housing : IP66
Protection class plug : IP67
Weight : 96g

Properties TPS-420

Operating voltage : 24V DC
Loop voltage min: : Bürde(Ohm) *0,02 + 8 V
Loop voltage max: : 30V

General properties

Housing : Aluminium, eloxiert
Dimensions (in mm) : 135 x Ø 19,2

Measuring range

measuring range (dew point) : -50…+80 °C
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V | 4...20mA

EK-CAN

PC program for CANopen sensors

Evaluation and configuration software for Fluid.iO CANopen sensors

Properties

Operating system : tba.
available disc space : tba.
scrren resolution : tba.
softwatre architecture : tba.
software type : tba.
installation type : tba.

T203.F

Overfill protection for containers

Properties

Protection class : IP 65 Dose
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar
F-Contact : 1/12 kΩ
Switching current : 1A, 2A
Switching voltage : 230 V AC

Float

quantity : max. 6
Type 05 : Oval Edelstahl 76 mm Ø | Dichte 0,81 g/cm³
Type 06 : Oval Edelstahl 90 mm Ø | Dichte 0,67 g/cm³
Minimum contact distance : Typ 05: 110 mm | Typ 06: 135 mm

Switching contacts and switching capacity

Changeover contact : max. 5x | 60 W/VA
normally open : max. 6x | 100 W/VA
Normally closed contact : max. 4x | 60 W/VA

T208

Immersible Magnetic Probe made of PVC, PE, PPH

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ZMF-100-IR

gas detector with 4...20mA signal output

industrial CO2 sensor ZMF-100-IR with a measuring range of up to 50,000ppm

Product features

Measuring principle : optisch, NDIR (nicht-dispersive Infrarot-Absorptionsmessung)
Operating voltage : 24 V DC / 100 mA
Heating time : ca. 5 min
Response time : ca. 30 s
Repeatability : +/- 1%
Housing : Aluminium (rot) IP54
Weight : ca. 500g
Shaft range : 4,27 - 4,35 µm (4270-4350 nm)
Gas ingress : per Diffusion

ambient conditions

Operating temperature range : -10...+50 °C
Storage temperature range : -40...+100 °C
RelativeHumidity : 15..95 %
Air pressure : 900...1100 hPa

AD-310

programmable Digital Display

The programmable digital display AD-31… can be used in all applications through the parameterization capability of the input values and the display area.

Properties