Home
Cart

Cart

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

47 article(s) in your cart
pos.	image	product	Configure	Actions
1		AD-310
2		T205 PP
3		VS-D250
4		EF2…5 24V
5		TK-101 EX
6		KST-20 Calima
7		ELH 24 V
8		ER-107
9		T200 Ex
10		ZDT-N
11		ZT-V
12		OAA-300
13		ER-214
14		ZDS-H
15		T201
16		T200.F
17		ZDS-N
18		CS-11
19		T-200.L Ex
20		MO
21		T208
22		QFS-55
23		ZT Serie
24		HE
25		ZCS-5000
26		ZT-H
27		T-200.L 24V
28		Aero_aH100
29		ZDS-Serie
30		SG2420
31		ER-Serie
32		XR-4x0 \| XR-4x1
33		ZS-1
34		ESE
35		EF2X
36		ZS-2
37		TK-300
38		T-200.L 230V
39		ZS-Serie
40		NP-25X
41		ZT-S
42		ZT-N
43		FDL400
44		EP 24V
45		TK-302
46		QFS-12
47		ZT-F

AD-310 configure

1 Grenzkontakte

2 Versorgungsspannung

3 Schnittstelle

Amount

additional infomation

VS-D250 configure

1 Ausgänge

2 Spannungsversorgung

3 Gehäuse

Amount

additional infomation

EF2…5 24V configure

1 Sicherheitsfunktion

2 Elektrodenanzahl

3 Verschraubungsmaterial

4 Stabmaterial

5 Stabdurchmesser

6 Elektrodenbeschichtung

7 Anschlussgewinde

8 Kabelbruchwiderstand

9 Auswerteelektronik

10 Stablänge

11 SIL

Amount

additional infomation

TK-101 EX configure

1 ATEX

Amount

additional infomation

KST-20 Calima configure

1 Innensensor

2 Außensensor

Amount

additional infomation

ELH 24 V configure

1 Stabmaterial

2 Anschluss

3 Kabellänge

4 Kabelbruchwiderstand

5 Sondenkörper-Durchmesser

6 Anschlussgewinde

7 Sondenkörper-Material

8 Kabelmaterial

9 Auswerteelektronik

Amount

additional infomation

ZT-V configure

1 Measuring range

2 Output signal

3 Connection

4 Process connection

Amount

additional infomation

OAA-300 configure

1 Ausführung

2 Versorgungsspannung

3 Signalgeber

Amount

additional infomation

ER-214 configure

1 Gehäuse

2 Ausgang

3 Schaltverzögerung

4 Empfindlichkeitsbereich

5 Versorgungsspannung

6 Quittiertaster

Amount

additional infomation

T-200.L Ex configure

1 Länge

2 Anschluss

3 Anschlussgewinde

4 Schwimmertyp

5 Ex

Amount

additional infomation

MO configure

1 Kontaktart

2 Kabelart

3 Kabellänge

4 Befestigung

Amount

additional infomation

QFS-55 configure

1 Ausführung

2 Kontakt

3 Schaltkontakt

4 Kabelmaterial

5 Kabellänge

6 Ex-Option

Amount

additional infomation

HE configure

1 Elektrodenkörper

2 Verschraubung

3 Elektrodenanzahl

4 Stabmaterial

5 Länge

6 EX

7 SIL

Amount

additional infomation

ZT-H configure

1 Measuring range

2 Output Signal

3 Electrical connection

4 Process connection

Amount

additional infomation

T-200.L 24V configure

1 Länge

2 Anschluss

3 Anschlussgewinde

4 Befestigungswinkel

5 Schwimmertyp

Amount

additional infomation

XR-4x0 | XR-4x1 configure

1 Kanalanzahl

2 Option

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Empfindlichkeitsbereich

7 Versorgungsspannung

8 Busanschluss

9 SIL

10 Ex

Amount

additional infomation

ZS-1 configure

1 Signalausgang

2 Druckmessbereich

3 Prozessanschluss

Amount

additional infomation

ESE configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

additional infomation

EF2X configure

1 Typ

2 Anschluss

3 Rohrmaterial und Anschlußkopf

4 Stabmaterial

5 Elektronikteil

Amount

additional infomation

ZS-2 configure

1 Signalausgang

2 Druckmessbereich

3 Prozessanschluss

Amount

additional infomation

TK-300 configure

1 Rohr-Verschraubungsmaterial

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

T-200.L 230V configure

1 Länge

2 Auswerteelektronik

3 Anschlussgewinde

4 Befestigungswinkel

5 Schwimmertyp

Amount

additional infomation

NP-25X configure

1 Staurohrmaterial

2 Anschlussgewinde

3 Druckschaltermembran

4 Kontakt

5 Staurohrlänge

Amount

additional infomation

ZT-S configure

1 Measuring End Range

2 Output signal

3 Connection

4 Process connection

Amount

additional infomation

ZT-N configure

1 Measuring Range

2 Output Signal

3 Electrical Connection

4 Process Connection

Amount

additional infomation

EP 24V configure

1 Sondenkörpermaterial

2 Stabmaterial

3 Kabellänge

4 Leitungsüberwachungswiderstand

5 Kabelmaterial

6 Ex-Zulassung

Amount

additional infomation

TK-302 configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführungen

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

QFS-12 configure

1 Kontakt

2 Schwimmermaterial

3 Kabelmaterial

4 Kabellänge

Amount

additional infomation

ZT-F configure

1 Measuring Range

2 Output Signal

3 Electrical connection

4 Process connection

Amount

additional infomation

AD-310

programmable Digital Display

The programmable digital display AD-31… can be used in all applications through the parameterization capability of the input values and the display area.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel : IP 65
Operating temperature : – 20...+ 60 °C
nominal voltage : Weitbereichsnetzteil; 20 V DC ... 230 V AC
Power consumption : max. ca. 3 VA
Output contact : 2 Schließer / NO
Switching voltage : max. 250 V AC, 300 V DC
Switching current : max. 3 A , DC min. 30 mA
Switching capacity : max. 50W, 100 VA
Unregulated auxiliary voltage source : 15...20 V DC / 20 mA
Display : LED 14 mm, 5-stellig
Dimensions : 96x48x100 mm
Weight : ca. 200 g
Panel cut-out : H:45+0,6mm, B:92+0,8 mm

Equipment

Measuring input current : 0(4)...20 mA DC
Measuring input voltage : 0(2)...10 V DC
Measuring input Potentiometric voltage divider : 1...100 kΩ
Display : LED 14 mm, 5-stellig
operation : Folientasten
Display range : -19999...32000
data backup : EEPROM
measurement uncertainty : ±1 % oder ±1 Digit
analogue output : 0 (4)...20 mA

T205 PP

Magnetic immersion probes made of PP

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 65
Number of floats : 1x Typ 12 | 1x Typ 13
connection cable : LiYY-Kabel 0,14 mm² | PVC-Litze 0,24 mm²
Operating temperature : max. 60 °C
Operating pressure : drucklos
Number of contacts : 1x Schließer / Öffner
Switching current : 1 A
Switching voltage : 250 V AC
Switching capacity : 50 W/VA

Float type

Type 12 : Zylinder PP 19 mm Ø | Dichte 0,93 g/cm³
Type 13 : Zylinder PP 25 mm Ø | 0,68 g/cm³

VS-D250

Transmitter for ViscoScope viscosity sensors

Maximum flexibility for an optimal choice of measuring instrument: The VS-D250 transmitter is compatible with all ViscoScope® sensors of the types VA-100 and VA-300.

Properties

Output card socket : 2
External input : 0/4…20 mA | 0/2…10 V DC
Power supply : 24V DC, 12 W
Dimensions : 142 x 106 x 73 mm (L x B x H)
Front : RS232, MODBUS RTU (Standard)

Display and Operation

Lines : 4
Pages : 2
Character set : alphanumerisch
Buttons : 3 (front)

Alarms

system function :
sensor diagnosis :
Coil Temperature :
2 configurable LEDs :

optional outputs

0/4…20mA | 0/2…10V DC (active) :
RS232 | RS485 :
2 SPDT-Relays: RS232 | RS485 :

Filter

Moving average (200 measured values) :

EF2…5 24V

Conductive electrodes with and without 24 V DC direct connection

The conductive electrodes EF2...5 are approved by the "DIBt" as overfill prevention devices for liquids hazardous to water.

Properties

Protection class EN60529 : IP 65
connection thread : G1" | G1¼" | G1½"
Union nut : G2¾" | S 100x8
Operating temperature PE / PVC : atmospheric
Operating temperature PPH : 90°C
Operating temperature PTFE : 100°C
Operating pressure : atmospheric
Resistance value of line monitoring : 22 kΩ / 100 kΩ
Spacer form length > 1000 mm : 1 per 1000 mm
rod length : max. 6.000 mm
Rod diameter : 4mm | 6 mm

Material

Screw connection : PPH | PE | PVC | PTFE
Sensor rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal
Coating : PTFE
ltdata. :

TK-101 EX

Measuring transducer (R/I-transducer)

The measuring transducer Tk101 and Tk101Ex are built directly into the connection boxes of our Liquid Level Measuring Instruments of type TK-30.

Properties

Operating temperature : -20...+60 °C
Storage temperature : -40...+80 °C
Ex-protection : siehe Zertifikat
CE marking : siehe Konformitätserklärung

Input

Resistance range in three-wire circuit : 4...10 kΩ
Measuring current : 0,8 mA @ RE = 4 kΩ
Measuring current : 0,33 mA bei RE = 10 kΩ
Measuring voltage : 3,3 V

Supply/Output

2-wire : 4...20 mA
Voltage(Um) : 11...28 V DC
Burden / load : 0...800 Ω |RBürde max = [(Um - Um min) / 0,02] Ω
Output signal in case of error : max. 24 mA

Fault influences

Max. Total error : ± 1 %
Temperature influence : -0,015 % / °C
Supply voltage influence : 0,025 % / V

Setting range

Full deflection : 60...105 %
Zero point adjustment : 0...25 %

KST-20 Calima

Climate control for automatic & controlled dehumidification, ventilation and cooling of rooms

The KST-20 Calima climate control system with aH-Controlled technology for ventilation and dehumidification for all types of private, commercial and industrial rooms. With the operating modes for living room ventilation and room dehumidification, the KST-20 Calima can be used flexibly in almost all living, working and industrial areas.

Specifications

measuring range (Humidity) : 0…100% rF,
Measuring accuracy (humidity) : ±2%
measuring range (Temperature) : -40…+80°C
Measuring accuracy (temperature) : ±0,2°C
Signal output : I2C
Connections for actuators : Zwei Steuer- und Schaltausgänge für Zuluft- und Abluftelemente
Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 140x140x46 mm

Connection options

Dehumidification : Einstufige Lüftungsventilatoren
Room dehumidification / living space ventilation : Zweistufige Lüftungsventilatoren
Living space ventilation / Dehumidification : Drehzahlgesteuerte Ventilatoren 0…10 V DC

Operating conditions

Temperature : 0...50 °C
RelativeHumidity : 85 % nicht kondensierend
EMV/ESD : EN50082-1/2

ELH 24 V

Hanging electrode as leakage probe 24 V DC

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

General data

Protection class : IP 68
Probe body material : PE, PVC, PPH, PVDF
Diameter probe body : 15 mm, 25 mm, 40 mm
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ

Material

Screw connection : PVDF
Cable : TPK ( PVC Basis)
on request : FEP (Teflon), PVC - blau
cable length : auf Wunsch (Standard 3 m)
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Glas-Kohlestifte

ER-107

Electrode Relays with general approval for constructions Z-65.13-405, Z-65.40-191

Electrode relays for conductive level detection with approved design as part of an overfill cut-out device (Z-65.13-405) / leakage protection (Z-65.40-191)

Properties

details : folgen

T200 Ex

Magnetic immersion probes with TÜV 02 ATEX 1795X approval for Ex zone 0

Magnetic immersion probes for detecting fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (category 1) is present in the gas space above the liquid and zone 1 (category 2) outside the container in the area of the junction box

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ZDT-N

Differential pressure transmitter for low pressure applications

Versatile and reliable differential pressure transmitter for measurement on air and other non-aggressive media.

Properties

Pressure type : Differenzdruck
Housing : Kunststoff mit LCD-Anzeige (optional)
Overpressure : 2,5* x Nenndruck

Measurement parameters

Total error : ± 2,5 % FS (typ. ± 0,5 %)
Linearity error : ± 1 % FS
Signal output selection : 0...10 V 4...20 mA
Pressure ranges (mbar) : 1/ 2 / 4 – 2,5 / 5 /10 – 12,5 / 25 /50 – 50 / 100 /200

Operating conditions

Operating voltage (0...10V) : 14...30 V DC
Operating voltage (4...20mA) : 12...30 V DC
Operating temperature : 0...+50 °C
Storage temperature : -20°C...+120°C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 3,5 mm oder 5,5 mm

Pressure measuring ranges

1/2/4mbar :
2,5/5/10mbar :
12,5/25/50mbar :
50/100/200mbar :
other on request :

ZT-V

Reliable pressure measurement and optimum process monitoring with the ZT series

From low to high pressure and suitable for liquid and gaseous media.

Connection

Signal output : 0...10 V, 3-Leiter | 0,5...4,5, ratiometrisch | 4...20 mA, 2-Leiter
Electrical connection : DIN EN 175301-803 A | DIN EN 175301-803 C | Binder M12x1 (Serie 713)
Process connection : G 1/4" ISO 1179-2 (Male Form E) | 1/4" NPT | 7/16" 20 UNF Male
measuring range (bar) : 0…0,6 | 0…600

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40°C...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

OAA-300

Alarm Indicator (Measuring Transducer) with general approval for construction

Our alarm indicators type OAA-300 are stand-alone signaling devices with optic and acoustic alarm indication.

Properties

Protection class EN60529 : IP 65
Operating temperature : – 20…+60 °C
Storage temperature : – 30…+80 °C
Sensitivity : bei konduktiver Messung: 3, 10, 30, 100kΩ
Dimensions : 170 x 190 x 85 mm
Weight : ca. 0,8 kg

Control circuits

Open circuit voltage : max. 10 V DC
Short-circuit current : max. 10 mA
Switching delay : ca. 0,5 s

Power supply

nominal voltage : 230 V AC (optional 24, 115, 240 V AC 24 V DC
Nominal frequency : 48...62 Hz
Power consumption : max. 3 W/VA

Output

Switching voltage : max. 250 V
Switching current : max. 3 A
Switching capacity : max. 500 VA | max. 50 W
Volume : 75 dB

ER-214

Electrode Relays

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
Storage temperature : –30...+80 °C
AC nominal frequency : 48...62 Hz
Power consumption : max. 1 W / VA
Weight : ca. 150 g

Input

Open circuit voltage : ≤ 10 V AC
Short-circuit current : ≤ 5 mA

Output

Contacts : 1 potentialfreie Wechselkontakte pro Kanal
Switching voltage : min. 5 V | max. 250 V AC | max. 150 V DC
Switching current : min. 5 mA | max. cosφ=1 3A | max. cosφ=0,7 1 A/AC | max. cosφ=1
Switching capacity : min. 300 mW | max. 750 VA / 150 W (30 V DC / 5 A) / 18 W (150 V DC / 0,12 A)
Working / Idle current : umschaltbar
overvoltage category : EN 61010-1 Kategorie III

ZDS-H

Precision pressure switch for high-pressure applications up to 2,000 bar

Can be used in oil, brake fluid, diesel, air and other gases. With very good stability and overpressure resistance.

Properties

Pressure range : 0...2.000 bar gestuft
supply : 24 V DC
Output : Relais 60 V AC/1A
overload : 1,5 x Messbereich
Med. connection : G 1/4 Zoll
electrical connection : Schraubklemme
feature : Tasten, LCD-Anz.

T201

Immersible Magnetic Probe made of stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

T200.F

Overfill protection for containers

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection

Polyester junction box :
Aluminum housing :
Polyethylene connection head :
Cable :
Plug :

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating pressure : Max. 20 bar
media density : ρ ≥ 0,6 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm
Operating temperature : atmosphärisch
PP : max. 90°C

Resistance value

Operational readiness : ca. 1 kΩ
overfill alarm : ca. 12 kΩ
Switching time : ca. 20 ms
ltdata. :

ZDS-N

Precision pressure switch for low pressure applications

Can be used in oil, brake fluid, diesel, air and other gases. With very good stability and overpressure resistance.

technical properties

Pressure range : 0...500mbar gestuft
supply : 12 - 24 V DC
Output : Relais 230 V/1A
overload : 2 x Messbereich
Med. connection : Schlauch
electrical connection : Schraubklemme
feature : Tasten, LCD-Anz.

CS-11

CO2 Sensor with digital Interface

Digital CO2 sensor CS-11 for measuring carbon dioxide concentration in mobile applications.

Properties CS-11

Measured variable: : CO2
Measuring range: : 0…5.000 ppm
Measuring principle: : optisch, NDIR
Housing : Kunststoff
measuring grid : 2 sec.
Accuracy : ± 50 ppm
Protocol : I²C-Bus
Operating conditions Temperature : -0°C … 50°C
Operating conditions Humidity : 0…85 % rH
Storage conditions Temperature : -30°C … 70 °C
Storage conditions Humidity : 0…85 % rH

Properties MV-CAN

Housing : Plastik
Mounting : Hutschienenmodul für Einbau in Schaltschrank
Operating voltage : 10…48 V
measuring grid : 2 sec.
CAN protocol : CANopen 2.0 A nach CiA DS 404
Physical Layer : nach ISO 11898
Option : Bereitstellung des EDS-Files
Operating temperature : -40°C … +80°C
Storage temperature : -40°C … +120 °C

T-200.L Ex

Leakage probes with general building authority approval for hazardous areas

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaking water-polluting liquids. The T-200.L Ex may be used as leakage probes in hazardous areas, zone 1 (category 2).

Connection

Box : Ex-Polyesterdose (PO)

Properties

Protection class : IP 65
Cable entry : PVDF-Verschraubung, PVC-Dichtung
Material Float : PE
Material leakage probe base : PE
Cable : TPK (PVC Basis)
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
media density : mit Schwimmer PE 52 ρ ≥ 1,05 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Resistance value

Operational readiness : ca. 1 kΩ
Leakage detection : ca. 12 kΩ
Switching time : ca. 20 ms

MO

Monostable Switch

Properties

Protection class : IP 65
Switching current : max. 1 A
Switching voltage : max. 24 V
Switching capacity : max. 20 W/VA

Material

Housing : Messingrohr Ø 10 x 1
Cable : TPK (PVC basis) | SIL (Silikon)

Operating temperature

TKP : –15 ° ... + 60 °C
SIL : –15 ° ... +130 °C

T208

Immersible Magnetic Probe made of PVC, PE, PPH

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

QFS-55

Teflon float switch in rod design

The float switch combination is built with float switches of the QFS-50 and QFS-60 series. This makes it possible to control a level in a simple way.

Technical Data

Material : PTFE (Teflon)
connection cable : Silikon, Teflon
Material rod : VA-Rohr, PTFE beschichtet
Operating temperature : max. +150 °C
media density : ρ ≥ 0,75 g/cm³
Switching system : Reed-Schalter
Contact : Wechsler, NO, NC
Inductive/capacitive loads : Unbedingt Kontaktschutz vorsehen
Ex-protection optional : Elektrische Daten siehe EG-Prüfbescheinigung IBExU10ATEX 1089

Reed contact

Switching current : 1 mA ... 1 A
Switching voltage : 24 ... 250 V AC/DC
Switching capacity : Max. 1A, 60 VA / 60 W
Switching hysteresis : ca. 100 mm
Switching angle : ca. +20°...–20°

Namur circuit (1kΩ/12kQ)

Switching current / switching voltage : nur zum Anschluss an KR-163... oder andere „Namur”-Relais
Switching hysteresis : ca. 100 mm
Switching angle : ca. +20°...–20°

ZT Serie

Reliable pressure measurement and optimum process monitoring with the ZT series

From low to high pressure and suitable for liquid and gaseous media.

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

HE

Pendant electrodes – single, multiple

suitable for high tanks, wells and sewers

tdata.AnschlussmitDose

Protection class EN60529 : IP 54
connection thread : G 2”

tdata.AnschlussohneDose

Protection class EN60529 : IP 67
connection thread : n.a. / G 2”

Material

electrode body : PVC, PTFE, PPH
Screw connection : PVC, PTFE
Cable : PVC, PTFE
electrode rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal

Operating temperature

HE_PVC : 60 °C
HE-PTFE : 150°C

ZCS-5000

Self-contained CO2 sensor ZCS-5000 in small housing with warning horn

stand alone CO2 sensor for measuring and monitoring carbon dioxide concentration in ambient air.

Properties

Housing : Kunststoff
Power supply 24V : 24V DC | 230V

Measuring element and parameter

Measuring principle : optisch, NDIR
measuring grid : 2 sec.
Accuracy : ± (50ppm+3% vom Messwert) im Bereich von 300…5.000ppm CO2

Operating conditions

Operating temperature : 0…+50 °C
Storage temperature : -30 °C…+75 °C
Operating humidity : 0…85% rH (nicht kondensierend)
Storage humidity : 0…85% rH (nicht kondensierend)

ZT-H

High pressure sensor for liquid and gaseous media

Versatile use in industrial applications for measuring ranges up to 4,000bar

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

T-200.L 24V

Leakage probes with general building authority approval

The leakage probes T-200.L (24 V) are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

Connection

Box : Polyesterdose (PO)
Head : Polyethylenanschlusskopf (PE)

Properties

Protection class : IP 65
Cable entry : PVDF-Verschraubung , PVC-Dichtung
Material Float : PE
Material leakage probe base : PE
Cable : TPK (PVC Basis)
Operating temperature : max. 60 °C
Operating pressure : atmosphärisch
media density : mit Schwimmer PE 52 ρ ≥ 1,05 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Power supply

nominal voltage : 24 V DC (24...30 V DC)
Power consumption : ≤ 1 W

Output

Output contact : 1 potentialfreier Wechselkontakt
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 3 A AC / 3 A DC
Switching capacity : max. 750 VA / 90 W

Optocoupler

Switching voltage : max. 30 V
Switching current : max. 100 mA
displays : Betriebs-LED grün, Funktions-LED rot
Switching delay : ca. 0,5 s Anzug/Abfall

Aero_aH100

Exhaust air fan with integrated dehumidification control for automatic room dehumidification

Dehumidification control, including integrated indoor and outdoor climate sensor. Controlled dehumidification takes place by comparing the indoor and outdoor climate. To support room dehumidification, a ventilation fan can be directly connected and controlled via the Aero_aH 100.

Properties

Power supply : 230V~ 50Hz
power consumption : 8 W
Protection class : IPX4
flow rate : 78 m³/h bis zu 92 m³/h
color : verkehrsweiß, ähnlich RAL 9016
Material : Kunststoff
Noise level : 27 dB(A) / 32 dB(A)
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100% rF
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C

ZDS-Serie

Precision pressure switch in robust design and first-class technical features.

Can be used in oil, brake fluid, diesel, air and other gases. With very good stability and overpressure resistance.

Properties ZDS-N

Pressure range (stepped) : 0...500 mbar
supply : 12 - 24 V DC
Output : Relais 230 V/1A
overload : 2 x Messbereich
Med. connection : Schlauch
electrical connection : Schraubklemme
feature : Tasten, LCD-Anz.

Properties ZDS-H

Pressure range (stepped) : 0...2.000 bar
supply : 24 V DC
Output : Relais 60 V AC/1A
overload : 1,5 x Messbereich
Med. connection : G 1/4 Zoll
electrical connection : Schraubklemme
feature : Tasten, LCD-Anz.

SG2420

Supply unit SG2420 for flow sensor

The DSM-2420 sensor can only be operated in hazardous areas with the associated SG2420 power supply unit or appropriately designed, approved Zener barriers.

Properties

Housing : Kunststoff
Protection class : IP00
Ambient temperature : -20…+60°C
Supply voltage : 24V DC +20% / -10%

ER-Serie

Electrode Relays

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

details : folgen

XR-4x0 | XR-4x1

Electrode relay with ATEX

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Quiescent current : umschaltbar
Weight : ca. 250 g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

ZS-1

Differential pressure sensor for low pressure

Compact and robust differential pressure transmitter for measurement on air and other non-aggressive media

Properties

Pressure type : Differenzdruck
Housing : Aluminium
medium : Luft und nicht aggressive Gase

Measurement parameters

response time : < 2,5 s
Hysteresis : 0,1 %
Overload capacity : 4* fach bis 500 mbar, darüber 2* fach
Signal output selection : 0...10 V | 4...20 mA, 2-Leiter

Operating conditions

Operating voltage : 24 VDC/AC ±10 % (0...10 V) | 15...30 VDC (4...20 mA)
Operating temperature : -20...+50 °C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 4 mm oder 6 mm
Cable gland : PG 7

Pressure measuring range

0...0,25mbar :
0...0,5mbar :
0...1mbar :
0...2,5mbar :

ESE

Switching channel extension for ES series

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

EF2X

Double pipe and filling pipe monitoring

EF2L and EF2T -conductive- with general technical approval for construction Z-65.13-405

Properties

Electrical connection : Stecker GDM
Protection class EN60529 : IP 65 mit Dichtung
connection : PVC Überwurfmutter G 1 ¼“
PVC : max. +60 °C
PE : max. +80 °C
Storage temperature : -30...+85 °C
Operating pressure : max. 6 bar

Material

Pipe : PVC | PE
Sensor rods : Edelstahl 1.4571 | Hastelloy B/C | Titan | Tantal

tdata.ElektronikteilET-473L|ET-473T

nominal voltage : 20...30 V DC
Power consumption : 1 VA
Output contact : Schließer | Öffnerkontakt (NO/NC) (nicht potentialfrei)
Switching voltage : 12...30 V DC
Switching current : max. 300 mA
Switching capacity : max. 9 W
Sensitivity range : 2...30 kOhm
ltdata. :

ZS-2

Differential pressure sensor for low pressure

Compact and robust differential pressure transmitter for measurement on air and other non-aggressive media

Properties

Pressure type : Differenzdruck
Housing : Aluminium
medium : Luft und nicht aggressive Gase

Measurement parameters

response time : < 2,5 s
Hysteresis : 0,1 %
Overload capacity : 4* fach bis 500 mbar, darüber 2* fach
Signal output selection : 0...10 V | 4...20 mA, 2-Leiter

Operating conditions

Operating voltage : 24 VDC/AC ±10 % (0...10 V) | 15...30 VDC (4...20 mA)
Operating temperature : -20...+50 °C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 4 mm oder 6 mm
Cable gland : PG 7

Pressure measuring range

0...2,5mbar :
0...5mbar :
0...10mbar :
0...25mbar :
0...50mbar :
0...100mbar :
0...250mbar :
0...500mbar :
0...1.000mbar :

TK-300

Level transducer

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Properties TK-300

connection : Polyesterdose | Aluminiumdose | Stecker nach DIN 43650
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 10 (14)
connection cable : 1000 mm LiYY 0,5 mm² oder Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating pressure : max. 6 bar
Resolution : 10 mm, 15 mm oder 1%, 2%, 5% je nach Auflösung
CE marking : siehe Konformitätserklärung

Operating temperature

PV : max. 60°C
PE : max 80 °C
PP : max. 90°C

MaterialDensity

Type 10 : 0,72 g/cm³
Type 14 : 0,72 g/cm³
Type 18 : 0,82 g/cm³

T-200.L 230V

Leakage probes with general building authority approval

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

Connection

Box : Polyesterdose (PO)

Properties

Protection class : IP 65
Cable entry : PVDF-Verschraubung , PVC-Dichtung
Material Float : PE
Material leakage probe base : PE
Cable : TPK (PVC Basis)
Operating temperature : max. 60 °C
Operating pressure : atmosphärisch
media density : ρ ≥ 0,6 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Power supply

nominal voltage : 24…230 V AC/DC
Power consumption : ≤ 2 W

Output

Output contact : 2 potentialfreie Wechselkontakte
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 5 A AC / 5 A DC
Switching capacity : max. 750 VA / 90 W
displays : Betriebs-LED grün, Funktions-LED rot
Switching delay : ca. 0,5 s Anzug/Abfall
CE marking : siehe Konformitätserklärung

ZS-Serie

Differential pressure sensor for low pressure

Compact and robust differential pressure transmitter for measurement on air and other non-aggressive media

Properties

Pressure type : Differenzdruck
Housing : Aluminium
medium : Luft und nicht aggressive Gase

Measurement parameters

response time : < 2,5 s
Hysteresis : 0,1 %
Overload capacity : 4* fach bis 500 mbar, darüber 2* fach
Signal output selection : 0...10 V | 4...20 mA, 2-Leiter

Operating conditions

Operating voltage : 24 VDC/AC ±10 % (0...10 V) | 15...30 VDC (4...20 mA)
Operating temperature : -20...+50 °C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 4 mm oder 6 mm
Cable gland : PG 7

NP-25X

Pneumatic level switch

Reliable & simple probe for sensing aggressive, sticky or heavily contaminated liquids, especially suitable as overflow protection.

Properties NP-250 | NP-252

Connection head : PA
Protection class EN60529 Connection head : IP 54
connection thread : ab G½”
Container connection flange : ab DN 25
Pitot tube material : PVC
Material Screw connection : PVC
Material flange : PVC
Hose Ø : 16 mm / 25 mm
Operating temperature : max. +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching voltage silver : 250 V AC
Switching voltage gold : 24 V AC
Switching current silver : 6 A
Switching current gold : 100 mA

Properties NP-251 | NP-253

Connection head : PS
Protection class EN60529 Connection head : IP 54
connection thread : ab G½”
Container connection flange : ab DN 25
Pitot tube material : 1.4571
Material Screw connection : 1.4571
Material flange : 1.4571
Hose Ø : 15 mm / 28 mm
Operating temperature : max. +60 °C
medium temperatur : max. +90 °C
Contact : Wechsler
Switching voltage silver : 250 VAC
Switching voltage gold : 24 V AC
Switching current silver : 6 A
Switching current gold : 100 mA

ZT-S

Functionally safe pressure transmitter for ES series

Reliable pressure measurement and optimal process monitoring thanks to the ZT series. Developed for high demands and safety-critical applications

Properties

Operating voltage : 12...32 V DC (max. 0,2 W)
Dimensions : Ø 22 x 59 (D x H), SW22
Housing : Edelstahl
Measuring range nominal pressure : -1…500 bar
Overpressure : 2 x Nenndruck
Bursting pressure : 4 x Nenndruck
Protection class : IP65
Output signal : ZILA-DIO

Operating conditions

Pressure type : Relativdruck
Temperature of the fluid : -40 …+125 °C
fluid temperature (optional) : -20 …+125 °C
Ambient temperature : -40 …+105 °C

electrical connection

Standard : Binder M12 x 1

ZT-N

Customisable low pressure sensor for precise measurement of the smallest pressures

Reliable low pressure sensor in a robust and compact design

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

FDL400

Flow Data Logger

The FDL400 "Flow Data Logger 400" measuring device is suitable for measuring the flow of water and wastewater in fully or partially filled sewers or pipes of various geometries.

Properties