Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

6 article(s) in your cart
pos.	image	product	Configure	Actions
1		EP
2		Aero_aH100
3		KS-Serie
4		BK-3X0
5		T200
6		ZDS-Serie

EP configure

1 Sondenkörpermaterial

2 Stabmaterial

3 Kabellänge

4 Leitungsüberwachungswiderstand

5 Kabelmaterial

6 Ex-Zulassung

Amount

additional infomation

EP

Plate Electrode as Leak Detector (conductive)

with general approval for constructions and EC-Type-Examination Certificate for Ex-zone 1(Cat. 2)

Properties

Protection class EN60529 : IP 68
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ
cable length : auf Wunsch

Material

Cable : TPK (PVC Basis)
Sensor rods : Edelstahl (1.4571) | Hastelloy B | Hastelloy C | Titan | Tantal | Glaskohlenstoff

Options

cable material : FEP (Teflon) | EX (PVC blau)

Aero_aH100

Exhaust air fan with integrated dehumidification control for automatic room dehumidification

Dehumidification control, including integrated indoor and outdoor climate sensor. Controlled dehumidification takes place by comparing the indoor and outdoor climate. To support room dehumidification, a ventilation fan can be directly connected and controlled via the Aero_aH 100.

Properties

Power supply : 230V~ 50Hz
power consumption : 8 W
Protection class : IPX4
flow rate : 78 m³/h bis zu 92 m³/h
color : verkehrsweiß, ähnlich RAL 9016
Material : Kunststoff
Noise level : 27 dB(A) / 32 dB(A)
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100% rF
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C

KS-Serie

Sensors for temperature & humidity measurement

The KS series sensors are modular temperature and humidity measurement sensors in compact housings for use in almost any application.

Specifications

Housing shapes : Stabform | Alu- oder Polycarbonatgehäuse
measurands : Temperatur | relative Feuchte
Measuring range : -40...+80 °C | 0...100% rH
Signal output : 0...10 V oder 4…20 mA
Power supply : 12...30 V DC | 24 V DC

BK-3X0

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –25...+70 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm

Material

Housing : Polycarbonat
Mounting clip : V2A, Kabelbinder (PP)
Rivet : V2A
Screw connection : M 20 x 1.5, Polyamid

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 5...250 V AC/DC
Switching current : 1mA...6 A AC/DC
Switching capacity(min.) : 300 VA, 60 W
Switching capacity(max.) : 5 mW

T200

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil