QFS-2X

Stainless Steel Float Switch

Features

EX IP68

product family

level measurement

product class

Point Level Measurement

suitable for

fluids

measurement principle

Schwimmer


Special characteristics

  • Optionally: Ex-certification for Ex-Zone 1 (Cat. 2) according to ATEX

  • High chemical resistance

  • Suitable for use in liquids with different densities

Description

QFS-20 & QFS-21 float switches have stainless steel floats and one or two reed contacts.

Technical Data

Properties
Protection class EN60529
IP68
Material Float
VA 1.4571
Material hose
Edelstahlwellschlauch (1.4404) mit Edelstahldrahtumflechtung (1.4301)
Operating temperature
max. + 150 °C
media density
ρ ≥ 0,8g/cm³
Switching system
Reed-Schalter
Contact
Wechsler, NO, NC
Switching voltage
4...250 V AC/DC
Switching current
1 mA ...1 A
Switching capacity
max. 1A, 60 VA/60 W
Switching hysteresis
ca. 100 mm
Switching angle
ca. + 20° / – 20°
Operating pressure (QFS-20)
max. 15 bar
Operating pressure (QFS-21)
max. 6 bar

QFS-2X configuration

Your Configuration

Basename
QFS-2
Schwimmertyp
Kontakt
Kabelmaterial
Kabellänge
EX

Further product information

The QFS-20 and QFS-21 float switches  are supplied with an outer casing of stainless steel. Inside the float one or two reed contacts with a pivoted permanent magnet form the switching device. The switching device is so constructed that a slight shift of the switch from a horizontal position triggers off the signal. A highly flexible, three-core cable is used both for the electrical connection and for the mechanical attachment of the QFS.The whole QFS unit is so constructed that the float and the leadin line are hermetically sealed.

Ex-Protection optionally: IBExU10ATEX 1089

Benefit from our services

repair & maintenance

repair & maintenance

We produce durable products of high quality. However, if one of our products requires maintenance, we will gladly inspect the device in our Service Centre.

product development

product development

Our standard products have not yet completely convinced you? We offer customer-specific adaptation of our standard products to your wishes. Get in touch with us!

application-specific solution

application-specific solution

Are you looking for a suitable product solution for your measurement task? We recommend a product solution from our product range according to your specifications.

application-specific solution

Support & Start-up

Straightforward & fast support when things get stuck! Our support team will be glad to help you with any questions you may have about commissioning.

Our application engineers advise you personally, comprehensively and professionally!

Simply contact us by phone or e-mail!

Call us right away!

+49-6251-8462-0

contact form

Logo of Fluid.iO Sensor + Control

Fluid.iO
Sensor + Control
GmbH & Co. KG

An der Hartbrücke 6
64625 Bensheim