Home
Cart

Cart

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

6 article(s) in your cart
pos.	image	product	Configure	Actions
1		T205 VA
2		MKL
3		ZT-F
4		QFS-40
5		NP-255
6		XR Relais

MKL configure

1 Material

2 Anschlussflansch

3 Prozessanschluss

4 Schwimmer

5 Ablassschraube

6 Anzeige

7 Mittenentfernung

Amount

additional infomation

ZT-F configure

1 Measuring Range

2 Output Signal

3 Electrical connection

4 Process connection

Amount

additional infomation

QFS-40 configure

1 Anschluss

2 Gehäusematerial

3 Kabelmaterial

4 Kabellänge

Amount

additional infomation

NP-255 configure

1 Ausführung

2 Staurohr-Anzahl

3 Anschlussgewinde

4 Druckschalter

5 Kontakt

6 Längen

Amount

additional infomation

T205 VA

Stainless steel magnetic immersion probes

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 65
Number of floats : max. 2x Typ 08
connection cable : Silikon Litze
Operating temperature : max. 100 °C
Operating pressure : max. 10 bar (Zylinder)
Number of contacts : max. 2 x Schließer/ Öffner wahlweise durch 180°-Drehung des Schwimmers bei 2 Schwimmern
Switching current : 1 A
Switching voltage : 250 V AC
Switching capacity : 50 W/VA
Sliding tube length : max. 1000 mm
media density : Typ 08: 0,78 g/cm³
float : Zylinder Edelstahl 1.4571 27 mm Ø
min. contact distance with several floats : 50 mm

MKL

Magnetic Flap Indicator

The MKL level indicator is connected by its two connections to the container to be monitored (see connection example). According to the law of interconnected containers the level in the float chamber corresponds exactly to the level in the container

Properties

connection : Flansch ab DN 15
Material : rostfreier Edelstahl, PVC, PPH, PVDF
Material flange : Edelstahl 1.4571, C22.8
Material Float : Edelstahl, Titan, PVC, PPH, PVDF
Number of contacts : beliebig
Contact load : max 10 VA, max 230 V AC
Display length : max. 6m

Operating temperature

PTFE seal : max. 150 °C
Stainless steel: Klingerit seal : max. 200 °C
PVC : max. 60 °C
PPH : max. 90 °C
PVDF : max. 130 °C

Stainless steel float

Weight : ~ 300 g
Dimensions : Ø 52 x 270
Operating pressure : 16 bar
media density : ρ ≥ 0,70 g/cm³

Stainless steel float

Weight : ~ 320 g
Dimensions : Ø 52 x 270
Operating pressure : 40 bar
media density : ρ ≥ 0,75 g/cm³

Titanium float

Weight : ~ 180 g
Dimensions : Ø 52 x 150
Operating pressure : 16 / 40 bar
media density : ρ ≥ 0,73 g/cm³

PVC float

Weight : ~ 331 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,8 g/cm³

PPH float

Weight : ~ 283 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,69 g/cm³

PVDF float

Weight : ~ 352 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,85 g/cm³

ZT-F

Reliable OEM pressure sensor with many customisation options (0...0,6 to 0…1.000 bar)

Can be used with all media and applications compatible with stainless steel

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

QFS-40

Built-in float level switch

The QFS-40 built-in float switch is designed for low-cost monitoring of liquids in containers.

Technical Data

Switch housing : PPH| PVDF
Seal : NBR (PPH) | FPM (PVDF)
Operating temperature : PPH max. 80 °C| PVDF max. 100 °C
Operating pressure : max. 10 bar
Mounting position : horizontal (±30° von der Horizontalen)
Contact assembly : Schliesser-, Öffnerkontakt (je nach Einbau)
Electrical connection : PVC-Kabel
Switching capacity : max. 230 V AC/DC| max. 40 VA, max. 2 A
Contact resistance : max. 80 mW
Min. electric strength : 400 V DC / 1 s
Inductive/capacitive loads : Unbedingt Kontaktschutz vorsehen
fluid density : PPH > 0,6 kg/dm³ | PVDF > 0,95 kg/dm³
Protection class : IP 68

Connections

external installation : G ½"
internal installation : M16

NP-255

Level Switch - multiple 2...4 - pneumatic

very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated

Properties

Protection class EN60529 : IP 54
connection thread : ab G2”
Union nut : ab G2¾”
Container connection flange : ab DN 25
Hose Ø : 16 mm
Operating temperature : +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching capacity : 500 VA
Switch-on point (Viton membrane) : 150 mm WS ±30 mm
Switch-off point (MembraneViton) : 90 mm WS ±30 mm

Material

Pitot tube / Hose : PVC
Screw fitting/grommet : PVC
flange : PVC
Connection head : PVC

Switching voltage

silver : max. 250 V AC
Gold : max. 24 V AC

Switching current

silver : max. 6 A
Gold : max. 100 mA

XR Relais

Electrode relays and contact protection relays

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised. The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529