Home
Cart

Cart

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

72 article(s) in your cart
pos.	image	product	Configure	Actions
1		T204-0.F
2		Lub-VDT USB-Kit
3		T203
4		KST-20 VENTO CO2
5		ZMF-20x Serie
6		TK-308
7		XR-4x2
8		ELH
9		TK-301 PTFE
10		T201 PTFE
11		TK-300
12		T206
13		EE-2X
14		NP-255
15		EE-24
16		EP 24V
17		T201
18		TK-307
19		LU-1X0
20		MO
21		T-200.F Ex
22		ZDT-N
23		ELH 24 V
24		GSB-390
25		KS-17
26		TSL-CAN-03
27		ÜTA-32
28		BK-3X0
29		QFS-2X
30		KST-20 Vento-RN
31		TRM-100
32		XR Relais
33		ZDS-Serie
34		EF2...5
35		T205 VA
36		ZMF-100-IR
37		TPS-410 TPS-420
38		HD-110 \| HD-112 \| HD-114
39		QFS-55
40		T200 Ex
41		ESE
42		ZT-S
43		SG2420
44		T200.F
45		ES-20
46		T204.F
47		EFV2 20…230V
48		MKL
49		T-20X
50		ZMF-202e-IR
51		NP-25X
52		TPS-Serie
53		T207
54		ZT Serie
55		T204-0
56		TK-32X
57		KS-210 KS-220
58		NP-256
59		XR-4x0 \| XR-4x1
60		ZDS-N
61		DS-CAN-01
62		EF 3…5 24 V
63		NSP-X-E
64		KG-2XX
65		HD-1XX
66		ES-22
67		T209
68		MTA
69		CS-11
70		BI
71		OAA-300
72		LU-180 EX

T203 configure

1 Material Rohr + Verschraubung

2 Anschlussgewinde

3 Ausführung

4 Anzahl Schwimmer

5 Schwimmertyp

6 Anschlussdose

7 Kontaktart (monostabil)

8 Explosionsschutz

Amount

additional infomation

ZMF-20x Serie configure

1 Typ

2 Temperaturbereich

3 Messmethode

4 Signalausgang

5 Messbereich

6 Ex-Zulassung

Amount

additional infomation

TK-308 configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

XR-4x2 configure

1 Kanalanzahl

2 WHG

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Empfindlichkeitsbereich

7 Versorgungsspannung

8 Busanschluss

9 SIL

10 ATEX

Amount

additional infomation

TK-301 PTFE configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführungen

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

TK-300 configure

1 Rohr-Verschraubungsmaterial

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

EE-2X configure

1 Typ

2 Elektrodenanzahl

3 Anschlussgewinde

4 Stabmaterial

5 Stabdurchmesser

6 Beschichtung

7 Stablänge

8 SIL2

Amount

additional infomation

NP-255 configure

1 Ausführung

2 Staurohr-Anzahl

3 Anschlussgewinde

4 Druckschalter

5 Kontakt

6 Längen

Amount

additional infomation

EE-24 configure

1 Anschlußgewinde

2 Stabmaterial

3 Stabdurchmesser

4 Beschichtung

5 Kabelmaterial

6 Kabellänge

7 Stablänge

8 Optional:SIL

Amount

additional infomation

EP 24V configure

1 Sondenkörpermaterial

2 Stabmaterial

3 Kabellänge

4 Leitungsüberwachungswiderstand

5 Kabelmaterial

6 Ex-Zulassung

Amount

additional infomation

TK-307 configure

1 Anschluss

2 Rohrlänge

3 Auflösung

4 Zubehör

Amount

additional infomation

LU-1X0 configure

1 Typ

Amount

additional infomation

MO configure

1 Kontaktart

2 Kabelart

3 Kabellänge

4 Befestigung

Amount

additional infomation

T-200.F Ex configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schaltkontakte

7 Schwimmermaterial

8 Anschlussdose

9 Länge

10 EX

Amount

additional infomation

ELH 24 V configure

1 Stabmaterial

2 Anschluss

3 Kabellänge

4 Kabelbruchwiderstand

5 Sondenkörper-Durchmesser

6 Anschlussgewinde

7 Sondenkörper-Material

8 Kabelmaterial

9 Auswerteelektronik

Amount

additional infomation

GSB-390 configure

1 Mediumsdichte

Amount

1 Elektrodenanzahl

2 Verschraubungsmaterial

3 Stabmaterial

4 Stabdurchmesser

5 Elektrodenbeschichtung

6 Anschlussgewinde

7 Kabelbruchwiderstand

8 Auswerteelektronik

6 Ex-Option

Amount

additional infomation

ESE configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

1 Material

2 Anschlussflansch

3 Prozessanschluss

4 Schwimmer

5 Ablassschraube

6 Anzeige

7 Mittenentfernung

Amount

additional infomation

ZMF-202e-IR configure

1 Typ

2 Temperaturbereich

3 Messmethode

4 Signalausgang

5 Messbereich

6 Ex-Zulassung

Amount

additional infomation

NP-25X configure

1 Staurohrmaterial

2 Anschlussgewinde

3 Druckschaltermembran

4 Kontakt

5 Staurohrlänge

Amount

additional infomation

TK-32X configure

1 Ausführung

2 Leuchtdiode

Amount

additional infomation

NP-256 configure

1 Ausführung

2 Staurohr-Anzahl

3 Anschlussgewinde

4 Druckschalter

5 Kontakt

6 Längen

Amount

additional infomation

XR-4x0 | XR-4x1 configure

1 Kanalanzahl

2 Option

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Empfindlichkeitsbereich

7 Versorgungsspannung

8 Busanschluss

9 SIL

10 Ex

Amount

additional infomation

EF 3…5 24 V configure

1 Sicherheitsfunktion

2 Elektrodenanzahl

3 Anschlussgewinde

4 Stabmaterial

5 Stabdurchmesser

6 Beschichtung

7 Auswerteelektronik

8 Stablänge

9 SIL

Amount

1 Ausführung

2 Versorgungsspannung

3 Signalgeber

Amount

additional infomation

LU-180 EX configure

1 Typ

Amount

additional infomation

T204-0.F

Immersible Magnetic Probe for Ex Zone 0 (Cat. 1)

The T20... magnetic immersion probes are used to detect fill level limits in containers for liquid media, where an explosive atmosphere of Zone 0 (Cat. 1) exists in the gas space above the liquid and an Ex-Zone 1 (Cat. 2) exists outside the container in the area of the junction box.

Properties

connection : Kabel PUR blau
Protection class : IP 68 Dose
number of floats : max. 4x
Operating temperature : max. 135 °C
F-Contact : 1 / 12 kΩ
Number of additional contacts : max. 3x Wechsler | 5x Schließer | 3x Öffner
Switching current : 1 A, 2 A (nur mit Schirmung)
Switching voltage : 230 V AC

Float

Stainless steel ball 61 mm Ø : max. 20 bar | 0,65 g/cm³
min. contact gap type 04 : 85 mm

Switching contacts and switching capacity

Changeover contact : max. 3x | 60W/VA
normally open : max. 5x | 100 W / VA
Normally closed contact : max. 3x | 60 W/VA

Lub-VDT USB-Kit

Software and USB kit for configuration & evaluation

Properties

details : folgen

T203

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

tdata.

connection : Polyesterdose | Aluminiumdose
Protection class : IP 65 Dose
Guide tube : Edelstahl 1.4571, Ø 15 mm
Guide Tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar
F-Contact : 1/12 kΩ
Switching current : 1A, 2A ( nur mit Schirmung)

Float types

float type 05 : Dichte: 0,81 g/cm³ | 110 mm Abstand
float type 06 : Dichte: 0,67 g/cm³ | 135 mm Abstand

Number of contacts

Changeover contact : 5x
normally open : 6x
Normally closed contact : 4x

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

KST-20 VENTO CO2

KST-20 Vento with air quality monitoring function

Automatic, controlled ventilation and dehumidification of rooms with the aH-Controlled technology*

Properties

measuring range (Humidity) : 0…100 % rF,
Measuring accuracy (humidity) : ±2 %
measuring range (Temperature) : -40…+80 °C
Measuring accuracy (temperature) : ±0,2 °C
Signal output : I2C
measuring range (CO2) : 0…5.000 ppm
Adjustable limits : 1.000…1.500 ppm
Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 160 x 90 x 50 mm
Housing : hochwertiges ASA+PC (UL 94 V-0) für harte Beanspruchung, flammwidrig und selbstverlöschend

Measuring range

measuring range (Humidity) : 0...100 % rF
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80 °C
Measuring accuracy (temperature) : ± 0,2 °C
measuring range (CO2) : 0…5.000 ppm
Adjustable limits : 1.000...1.500 ppm

ZMF-20x Serie

Robust gas sensor for industrial applications with extended operating temperature range and wide-ranging approvals

The ZMF-20X series includes sensors & transmitters for measuring gas concentrations of various gases such as CO2, methane, propane and SF-6. This makes the sensors suitable for many applications. The ZMF-20X gas sensors are designed to be extremely rugged & suitable for use in harsh environments.

Properties

Operating conditions : -40 °C…+60 °C
Storage conditions : -40 °C…+85 °C
RelativeHumidity : 0…95 % nicht kondensierend
Measurement method : NDIR (dual beam technology)
Certification : SIL2-Zertifizierung, ATEX-Zertifizierung (auf Anfrage)
Signal output : 4..20mA
Power supply : 12…24 V DC
Housing : Edelstahl
Standard cable length : 1,5 m (weitere Längen auf Anfrage)
pressure conditions : 800...1200 mbar
screw thread : M46x1,5

TK-308

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 11,12, 15, 17
connection cable : 1000 mm LiYY 0,5 mm² oder Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating pressure : max. 6 bar
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

Operating temperature

PVC : max. 60 °C
PE : max. 80 °C
PP : max. 90 °C

MaterialDensity

Type 11 : 0,60 g/cm³
Type 12 : 1,00 g/cm³
Type 15 : 0,59 g/cm³
Type 17 : 0,63 g/cm³

XR-4x2

Electrode relay with ATEX and WHG approval

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V, max. 250 V AC / 150 V DC
Switching current : min. 5 mA, max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW, max.100 VA / max. 50 W
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Baumusterprüfbescheinigung
Weight : ca. 170 g

ELH

Suspension electrode as leakage probe

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

General data

Protection class : IP 68
Probe body material : PE, PVC, PPH, PVDF
Diameter probe body : 15 mm, 25 mm, 40 mm
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ

Material

Screw connection : PVDF
Cable : TPK ( PVC Basis)
on request : FEP (Teflon), PVC - blau
cable length : auf Wunsch (Standard 3 m)
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Glas-Kohlestifte

TK-301 PTFE

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 16
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 120 °C
Operating pressure : max. 3 bar
media density : 0,79 g/cm³
Resolution (depending on type) : 7,5 mm |10 mm | 15 mm | 20 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

T201 PTFE

Immersible Magnetic Probe made of PTFE

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

TK-300

Level transducer

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Properties TK-300

connection : Polyesterdose | Aluminiumdose | Stecker nach DIN 43650
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 10 (14)
connection cable : 1000 mm LiYY 0,5 mm² oder Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating pressure : max. 6 bar
Resolution : 10 mm, 15 mm oder 1%, 2%, 5% je nach Auflösung
CE marking : siehe Konformitätserklärung

Operating temperature

PV : max. 60°C
PE : max 80 °C
PP : max. 90°C

MaterialDensity

Type 10 : 0,72 g/cm³
Type 14 : 0,72 g/cm³
Type 18 : 0,82 g/cm³

T206

Magnetic immersion probes made of PP or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Number of contacts : 1 x Schließer/Öffner durch 180°-Drehung des Schwimmers
Switching current : 1 A
Switching capacity : 50 W/VA

T206PP

Float type : max. 2 x Typ 12 (13)
max. 2x Type 12(13) : LiYY-Kabel 0,14 mm² | PVC-Litze 0,24 mm²
Operating temperature : 60 °C
Operating pressure : drucklos
media density : Typ 12: 0,93 g/cm³ | Typ 13: 0,68 g/cm³
min. contact distance with several floats : 50 mm

T206VA

Protection class EN60529 : IP 65
Float type : max. 2 x Typ 08
connection cable : PTFE-Litze 0,24 mm²
Sliding tube length : max. 1000 mm
Operating temperature : max. 100 °C
Operating pressure : max. 10 bar
media density : Typ 08: 0,78 g/cm³
min. contact distance with several floats : 42 mm

EE-2X

electrode, multiple for Ex-Zone 0 (Cat. 1)

The conductive electrodes of the EE-21/EE-22 series enable the monitoring of conductive liquids within the Ex area Zone 0 (Cat. 1).

Variants

cable connection on side : EE-21
cable connection on top : EE-22

Properties

connection : Edelstahl (1.4571)
Protection class EN60529 : IP65
Ex-protection : TÜV 02 ATEX 1796 X
Ex protection type : II 1 G Ex ia IIC T6 bzw. Ex ia IIB T6 / II ½ G Ex ia IIC T6 bzw. Ex ia IIB T6
connection thread : G1" | G1¼"
Cable entry EE-21 : Edelstahl (1.4571)
Cable entry EE-22 : Kunststoff
Rod diameter : 4 mm | 6 mm
rod length : max. 6.000 mm
Operating pressure media side : max. 40 bar
Spacer : ab Länge > 1000 mm je 1 pro 1000 mm

Material

electrode body : Edelstahl (1.4571)
Seal (head) : Viton
Seal (media side) : Viton | PTFE
Potential equalisation conductor connection : Edelstahl (1.4571)
electrode rods : Edelstahl (1.4571) | Hastelloy C | Tantal
Coating : PTFE

Operating temperature

Category 1 Class T6...T1 : 60 °C
Category 2 Class T6 : 80 °C
Category 2 Class T5 : 95 °C
Category 2 Class T4 : 130 °C (100°C)
Category 2 Class T3...T1 : 150 °C (100°C)

NP-255

Level Switch - multiple 2...4 - pneumatic

very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated

Properties

Protection class EN60529 : IP 54
connection thread : ab G2”
Union nut : ab G2¾”
Container connection flange : ab DN 25
Hose Ø : 16 mm
Operating temperature : +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching capacity : 500 VA
Switch-on point (Viton membrane) : 150 mm WS ±30 mm
Switch-off point (MembraneViton) : 90 mm WS ±30 mm

Material

Pitot tube / Hose : PVC
Screw fitting/grommet : PVC
flange : PVC
Connection head : PVC

Switching voltage

silver : max. 250 V AC
Gold : max. 24 V AC

Switching current

silver : max. 6 A
Gold : max. 100 mA

EE-24

Ex-Electrode-single with integrated safety barrier

When using a threshold detection electrode with integrated safety barrier, exceeding or falling below a threshold in conductive fluids in Ex-Zone 0 (category 1) can be detected.

Properties

connection thread : G 1/2” Standard | G 3/4” | G1”
Cable : TPK (Standard) | SIL (Silikon) | FEP (Teflon)
rod length : max. 6.000 mm
Operating pressure : max. 40 bar

Material

electrode body : Edelstahl 1.4571
Process connection : Edelstahl 1.4571
Coating : PTFE
electrode rod : Edelstahl 1.4571
on request : Hastelloy C | Tantal

EP 24V

Plate Electrode as Leak Detector (conductive)

with general approval for constructions Z-65.40-191

Properties

Protection class EN60529 : IP 68
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ
cable length : auf Wunsch

Material

Cable : TPK (PVC Basis)
Sensor rods : Edelstahl (1.4571) | Hastelloy B | Hastelloy C | Titan | Tantal | Glaskohlenstoff

Options

cable material : FEP (Teflon) | EX (PVC blau)

T201

Immersible Magnetic Probe made of stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

TK-307

Stainless steel level sensor

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Connection housing : Aluminium H 30 mm x B 50 mm x T 45 mm
Connection socket : Polyester H 55 mm x B 80 mm x T 45 mm
Protection class socket / plug : IP 65
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Resolution depending on type : 7,5 mm | 10 mm | 15 mm | 20 mm | 1% | 2% | 5%
Mounting : 2 Schlauchschellen
Accessories : R/I-Wandler TK-101

LU-1X0

Compact Ultrasonic Level Sensor

The LU-150 is a short-range integrated ultrasonic level transmitter, intrinsically safe as Ex-version LU-180. This general purpose, 2 wire, 4 to 20 mA loop powered transmitter is ideal for liquids, slurries, and bulk materials in open or closed vessels to 5 m (16.4 ft).

Properties

Protection class EN60529 : IP 68
Power supply : 12...30 V DC / 0.1A Spitze
Power consumption : Max. 0,75 W (25 mA bei 24 V DC)
Output : 4...20 mA
Max. Load : 600 Ω bei 24 V DC
Measuring span : Proportional oder umgekehrt proportional
Measurable materials : Flüssigkeiten, Schlämme, Schuttgüter
operating temperature : –20...+60 °C
Opening angle : 12°
working pressure : Atmosphärisch
Display : 3-stelliges LCD
Process connection : Gewinde G 2" (BSPP) EN 10226 PVDF
Weight : 1,3 Kg
Cable entry : Kabelverschraubung M 20 x 1.5
Material housing electronics : Polybutylenterephthalat PBT
Material sensor / thread : PVDF-Copolymer

Input

Measuring range : 0,25...5,0 m
frequency : 54 kHz

Measuring Accuracy

Measurement deviation : ± 0,25 % vom Messbereich (in Luft)
Resolution : 3 mm
Temperature compensation : im Sensor integriert
Echo processing : „Sonic Intelligence“ von Siemens

MO

Monostable Switch

Properties

Protection class : IP 65
Switching current : max. 1 A
Switching voltage : max. 24 V
Switching capacity : max. 20 W/VA

Material

Housing : Messingrohr Ø 10 x 1
Cable : TPK (PVC basis) | SIL (Silikon)

Operating temperature

TKP : –15 ° ... + 60 °C
SIL : –15 ° ... +130 °C

T-200.F Ex

Overfill protection for containers with Ex approval

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection

Box : Ex-Polyester
Box : Ex-Aluminium

Properties

Protection class EN60529 : IP 65
connection thread : G2"
Union nut : G 2¾"
Guide tube length : max. 6 m
Operating temperature : -20…+60 °C
Operating pressure : max. 6 bar je nach Ausführung
media density : ρ ≥ 0,72 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : 2 mm
Switching point tolerance : max. 2 mm

Resistance value

Operational readiness : ca. 1 kΩ
overfill alarm : ca. 12 kΩ
Switching time : ca. 20 ms
Ex-protection : siehe Baumusterprüfbescheinigung
CE marking : siehe Konformitätserklärung

ZDT-N

Differential pressure transmitter for low pressure applications

Versatile and reliable differential pressure transmitter for measurement on air and other non-aggressive media.

Properties

Pressure type : Differenzdruck
Housing : Kunststoff mit LCD-Anzeige (optional)
Overpressure : 2,5* x Nenndruck

Measurement parameters

Total error : ± 2,5 % FS (typ. ± 0,5 %)
Linearity error : ± 1 % FS
Signal output selection : 0...10 V 4...20 mA
Pressure ranges (mbar) : 1/ 2 / 4 – 2,5 / 5 /10 – 12,5 / 25 /50 – 50 / 100 /200

Operating conditions

Operating voltage (0...10V) : 14...30 V DC
Operating voltage (4...20mA) : 12...30 V DC
Operating temperature : 0...+50 °C
Storage temperature : -20°C...+120°C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 3,5 mm oder 5,5 mm

Pressure measuring ranges

1/2/4mbar :
2,5/5/10mbar :
12,5/25/50mbar :
50/100/200mbar :
other on request :

ELH 24 V

Hanging electrode as leakage probe 24 V DC

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

General data

Protection class : IP 68
Probe body material : PE, PVC, PPH, PVDF
Diameter probe body : 15 mm, 25 mm, 40 mm
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ

Material

Screw connection : PVDF
Cable : TPK ( PVC Basis)
on request : FEP (Teflon), PVC - blau
cable length : auf Wunsch (Standard 3 m)
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Glas-Kohlestifte

GSB-390

Glass float with magnet insert

for actuating monostable and bistable contacts

Variants

150 : AußenØ 26,5 x 150 mm (2 Magnete für monostabile Kontakte) Gewicht ca. 50 g
190 : AußenØ 26,5 x 190 mm (2 Magnete für monostabile Kontakte) Gewicht ca. 61 g
205 : AußenØ 26,5 x 205 mm (3 Magnete auch für bistabile Kontakte) Gewicht ca. 69 g

KS-17

digital climate transmitter

The digital climate sensor measures temperature and relative humidity in a combined sensor element.

Technical specifications

Housing : Plastik
Measured variable : Temperatur und relative Feuchte kapazitiv (alle Geräte)
Measurable temperature : -40…+120 °C
Measuring range humidity : 0…100 % rH
Sensor technology : Halbleiter
Power supply : 2,4…5,5 V
Output : digitales Protokoll
features : Gehäuse für Oberflächenmontage

TSL-CAN-03

Temperature sensor with CAN bus interface for air temperature measurement

CANopen transmitter for temperature measurement in media, semiconductor sensor

Properties

Measuring range : -40…+80 °C
deviation : ± 0,3 K (10...80 °C)
Measuring element : Halbleiter-Diodenfühler
measuring resolution : 0,1 K
measuring grid : ab 5 ms

ElectricalConnection

CAN protocol : CANopen 2.0 A, nach ciA DS 404
Physical Layer : nach DIN 11898
Operating voltage : 10...48 V

Operating conditions

Operating temperature : -40...+80 °C
Storage temperature : -40°C...+120°C
Shock resistance : 30g, Dauer: 14 ms bei Raumtemperatur
Vibration resistance : 10g bei 20 bis 1000 Hz
Minimumairspeedrequiredformeasurementacrossthesensor : 1,5 m/s

ÜTA-32

Overfuelling indicator

The top-mounted tank indicator is a mechanically operated, on-the-spot indicator. The liquid level in the tank located below the indicator is determined proportionately to the filling level and is indicated. Control of the level is easily achieved through the installation of switching contacts. The switching points for level control can be steplessly adjusted, on-the-spot and at any time.

Properties

connection : G 1” (andere Gewinde auf Anfrage)
max.length guide tube : siehe Diagramm
Operating temperature : atmosphär. Bedingungen
Operating pressure : atmosphär. Bedingungen
media density : siehe Eintauchtiefe
Number of contacts : beliebig
Contact load : max. 10 VA, max. 230 V AC
Length : max. 1750 mm

Material

Sight tube : PVC transparent
connection : PVC-Verschraubung mit PTFE-Stangenführung
Guide rod : Edelstahl, Titan, Hastelloy B, Hastelloy C oder PVCRohr
float : PE / PP

BK-3X0

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –25...+70 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm

Material

Housing : Polycarbonat
Mounting clip : V2A, Kabelbinder (PP)
Rivet : V2A
Screw connection : M 20 x 1.5, Polyamid

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 5...250 V AC/DC
Switching current : 1mA...6 A AC/DC
Switching capacity(min.) : 300 VA, 60 W
Switching capacity(max.) : 5 mW

QFS-2X

Stainless Steel Float Switch

QFS-20 & QFS-21 float switches have stainless steel floats and one or two reed contacts.

Properties

Protection class EN60529 : IP68
Material Float : VA 1.4571
Material hose : Edelstahlwellschlauch (1.4404) mit Edelstahldrahtumflechtung (1.4301)
Operating temperature : max. + 150 °C
media density : ρ ≥ 0,8g/cm³
Switching system : Reed-Schalter
Contact : Wechsler, NO, NC
Switching voltage : 4...250 V AC/DC
Switching current : 1 mA ...1 A
Switching capacity : max. 1A, 60 VA/60 W
Switching hysteresis : ca. 100 mm
Switching angle : ca. + 20° / – 20°
Operating pressure (QFS-20) : max. 15 bar
Operating pressure (QFS-21) : max. 6 bar

KST-20 Vento-RN

Climate control with aH-Controlled technology and Rn-Protected seal

The KST-20 Vento/RN is a climate control unit with aH-Controlled technology and Rn-Protected seal for ventilation and dehumidification of all types of private, commercial and industrial rooms. With the three operating modes for ventilation, dehumidification and radon measurement, the KST-20 Vento climate control unit can be used flexibly in almost all living, working and industrial areas.

Properties

Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 160 x 90 x 50 mm
Housing : hochwertigem ASA+PC (UL 94 V-0) für harte Beanspruchung, flammwidrig und selbstverlöschend
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100 % rF
Measuring accuracy (humidity) : ±2 %
measuring range (Temperature) : -40…+80 °C
Measuring accuracy (temperature) : ±0,2 °C
measuring range (radon) : 0...1200 Bq/m³
Adjustable limits : 80...1000 Bq/m³

TRM-100

Turbidimeter (0...1.000 FNU or 500...4.000 FAU)

The turbidimeter TRM-100 is a compact device for measuring turbidity in liquids. The "turbidity" is measured using the scattered light method (angle 90 degrees) for the turbidity range of < 1,000 FNU (Formazine Nephelometric Units) and the transmitted light method (angle 0 degrees) for the turbidity ranges > 1,000 FAU (Formazine Attenuation Units).

Properties

Operating pressure : max. 10 bar @ 20 °C | max. 2,5 bar @ 60 °C
Measuring range : 500...4.000 FNU / FAU
Measuring accuracy : +/-5 %
Mounting position : horizontal
Process connection : DN 20 | DN 40
Flange connection : >= DN 20
number of senders : 2
number of receivers : 1

Material

Seal : EPDM | optional FPM (Viton)
Process connection : PVC | PPH
Measuring tube : Borsilikatglas mit Nano Beschichtung

Input

Power supply : 18...30 V DC
Power consumption : < 2 W

Output

Output contact : 4...20 mA
Switching delay (adjustable) : 1...10 s
Protection class : IP 65
Switching voltage : max. 250 V AC | max. 115 V DC
Switching current : max. 3 A
Switching capacity : max. 500 VA, 60 Watt
Potential-free changeover contact : 1 @ 1...10 s

XR Relais

Electrode relays and contact protection relays

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised. The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Quiescent current : umschaltbar
Weight : ca. 250 g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

ZDS-Serie

Precision pressure switch in robust design and first-class technical features.

Can be used in oil, brake fluid, diesel, air and other gases. With very good stability and overpressure resistance.

Properties ZDS-N

Pressure range (stepped) : 0...500 mbar
supply : 12 - 24 V DC
Output : Relais 230 V/1A
overload : 2 x Messbereich
Med. connection : Schlauch
electrical connection : Schraubklemme
feature : Tasten, LCD-Anz.

Properties ZDS-H

Pressure range (stepped) : 0...2.000 bar
supply : 24 V DC
Output : Relais 60 V AC/1A
overload : 1,5 x Messbereich
Med. connection : G 1/4 Zoll
electrical connection : Schraubklemme
feature : Tasten, LCD-Anz.

EF2...5

Conductive Electrodes with general approval for constructions

Conductive electrodes type EF2...5 are approved by the “DIBt” (German Institute for Structural Engineering) as liquid level limit switches for the overfill protection of containers for storing water-endangering liquids

Properties

Protection class EN60529 : IP 65
connection thread : G1" | G1¼" | G1½"
Union nut : G2¾" | S 100x8
Operating temperature PE / PVC : atmospheric
Operating temperature PPH : 90°C
Operating temperature PTFE : 100°C
Operating pressure : atmospheric
Resistance value of line monitoring : 22 kΩ / 100 kΩ
Spacer form length > 1000 mm : 1 per 1000 mm
rod length : max. 6.000 mm
Rod diameter : 4mm | 6 mm

Material

Screw connection : PPH | PE | PVC | PTFE
Sensor rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal
Coating : PTFE
ltdata. :

T205 VA

Stainless steel magnetic immersion probes

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 65
Number of floats : max. 2x Typ 08
connection cable : Silikon Litze
Operating temperature : max. 100 °C
Operating pressure : max. 10 bar (Zylinder)
Number of contacts : max. 2 x Schließer/ Öffner wahlweise durch 180°-Drehung des Schwimmers bei 2 Schwimmern
Switching current : 1 A
Switching voltage : 250 V AC
Switching capacity : 50 W/VA
Sliding tube length : max. 1000 mm
media density : Typ 08: 0,78 g/cm³
float : Zylinder Edelstahl 1.4571 27 mm Ø
min. contact distance with several floats : 50 mm

ZMF-100-IR

gas detector with 4...20mA signal output

industrial CO2 sensor ZMF-100-IR with a measuring range of up to 50,000ppm

Product features

Measuring principle : optisch, NDIR (nicht-dispersive Infrarot-Absorptionsmessung)
Operating voltage : 24 V DC / 100 mA
Heating time : ca. 5 min
Response time : ca. 30 s
Repeatability : +/- 1%
Housing : Aluminium (rot) IP54
Weight : ca. 500g
Shaft range : 4,27 - 4,35 µm (4270-4350 nm)
Gas ingress : per Diffusion

ambient conditions

Operating temperature range : -10...+50 °C
Storage temperature range : -40...+100 °C
RelativeHumidity : 15..95 %
Air pressure : 900...1100 hPa

TPS-410 TPS-420

Compact, analogue dew point sensor

The dew point sensors of the enable direct measurement of the dew point and ambient temperature indoors and outdoors.

Properties TPS-410

Operating voltage : 12...30V DC
Power consumption : < 15mA
Protection class Housing : IP66
Protection class plug : IP67
Weight : 96g

Properties TPS-420

Operating voltage : 24V DC
Loop voltage min: : Bürde(Ohm) *0,02 + 8 V
Loop voltage max: : 30V

General properties

Housing : Aluminium, eloxiert
Dimensions (in mm) : 135 x Ø 19,2

Measuring range

measuring range (dew point) : -50…+80 °C
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V | 4...20mA

HD-110 | HD-112 | HD-114

Hydrostatic screw-in probes (4...20mA | 0.8...10mWS)

Continuous and precise level measurement in unpressurised, open basins and tanks as well as underground applications such as shafts, wells and boreholes.

Properties

Protection class EN60529 : IP 65
Operating temperature : -10...70 °C
Storage temperature : -25...70 °C
Power supply : 15...30 V DC
power : max. 25 mA
Output : 2-Leiter-Technik | 4...20 mA
Measuring range : 0,8...10 mWs (Standard)
Overpressure : ca. 20 %
Deviation from characteristic curve : Nichtlinearität,
Insulation resistance : > 100 kΩ
Short-circuit resistance : permanent
Reverse polarity protection : keine Schädigung o. Funktion bei vertauschten Anschlüssen

Materials

Housing : Edelstahl 1.4571, PVC, PVDF
Measuring cell : Edelstahl 1.4404, Keramik AI2o3 96%, Keramik AI2o3 99,9%
Seals : FKM (Viton ®), EPDM, FFKM (Kalrez ®)
connection thread : G ¾“ | G 1 ½“
Plug : Steckverbindung DIN 43650

QFS-55

Teflon float switch in rod design

The float switch combination is built with float switches of the QFS-50 and QFS-60 series. This makes it possible to control a level in a simple way.

Technical Data

Material : PTFE (Teflon)
connection cable : Silikon, Teflon
Material rod : VA-Rohr, PTFE beschichtet
Operating temperature : max. +150 °C
media density : ρ ≥ 0,75 g/cm³
Switching system : Reed-Schalter
Contact : Wechsler, NO, NC
Inductive/capacitive loads : Unbedingt Kontaktschutz vorsehen
Ex-protection optional : Elektrische Daten siehe EG-Prüfbescheinigung IBExU10ATEX 1089

Reed contact

Switching current : 1 mA ... 1 A
Switching voltage : 24 ... 250 V AC/DC
Switching capacity : Max. 1A, 60 VA / 60 W
Switching hysteresis : ca. 100 mm
Switching angle : ca. +20°...–20°

Namur circuit (1kΩ/12kQ)

Switching current / switching voltage : nur zum Anschluss an KR-163... oder andere „Namur”-Relais
Switching hysteresis : ca. 100 mm
Switching angle : ca. +20°...–20°

T200 Ex

Magnetic immersion probes with TÜV 02 ATEX 1795X approval for Ex zone 0

Magnetic immersion probes for detecting fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (category 1) is present in the gas space above the liquid and zone 1 (category 2) outside the container in the area of the junction box

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ESE

Switching channel extension for ES series

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

ZT-S

Functionally safe pressure transmitter for ES series

Reliable pressure measurement and optimal process monitoring thanks to the ZT series. Developed for high demands and safety-critical applications

Properties

Operating voltage : 12...32 V DC (max. 0,2 W)
Dimensions : Ø 22 x 59 (D x H), SW22
Housing : Edelstahl
Measuring range nominal pressure : -1…500 bar
Overpressure : 2 x Nenndruck
Bursting pressure : 4 x Nenndruck
Protection class : IP65
Output signal : ZILA-DIO

Operating conditions

Pressure type : Relativdruck
Temperature of the fluid : -40 …+125 °C
fluid temperature (optional) : -20 …+125 °C
Ambient temperature : -40 …+105 °C

electrical connection

Standard : Binder M12 x 1

SG2420

Supply unit SG2420 for flow sensor

The DSM-2420 sensor can only be operated in hazardous areas with the associated SG2420 power supply unit or appropriately designed, approved Zener barriers.

Properties

Housing : Kunststoff
Protection class : IP00
Ambient temperature : -20…+60°C
Supply voltage : 24V DC +20% / -10%

T200.F

Overfill protection for containers

Connection

Polyester junction box :
Aluminum housing :
Polyethylene connection head :
Cable :
Plug :

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating pressure : Max. 20 bar
media density : ρ ≥ 0,6 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm
Operating temperature : atmosphärisch
PP : max. 90°C

Resistance value

Operational readiness : ca. 1 kΩ
overfill alarm : ca. 12 kΩ
Switching time : ca. 20 ms
ltdata. :

ES-20

Pressure limiter | Pressure monitor | Safety pressure limiter | Pressure regulator | electronic safety switching device

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

Connections

Process connection Relative pressure (internal thread) : G ¼“
Process connection differential pressure (internal thread) : G ⅛“
Analogue current output : 1 x 4...20 mA
Digital inputs/outputs (configurable) : 2 x Alarm / 1 x Alarm & 1 x Fernentriegelung

Measuring range relative pressure

Nominal pressure (variable selectable) : -1...500 bar
Overload pressure : 2 x Nenndruck
Bursting pressure : 4 x Nenndruck
Setting accuracy : 0,1 % vom Nenndruck

Measuring range differential pressure

Nominal pressure : 0...1 mbar 0...10 mbar 0...50 mbar 0...100 mbar 0...250 mbar 0...1.000 mbar
Overload pressure : 10 x Nenndruck
Bursting pressure : 15 x Nenndruck
Setting accuracy : 0,1 % vom Nenndruck

T204.F

Immersible Magnetic Probes Ex area zone 0 (Cat 1)

Properties

connection : Polyester Dose | Aluminium Dose
Protection class : IP 65 Dose
number of floats : max. 4x
Operating temperature : max. 135 °C
F-Contact : 1 / 12 kΩ
Number of additional contacts : max. 3x Wechsler | 5x Schließer | 3x Öffner
Switching current : 1 A, 2 A (nur mit Schirmung)
Switching voltage : 230 V AC

Float

Stainless steel ball 52mm Ø : max. 20 bar | 0,75 g/cm³
Stainless steel ball 61 mm Ø : max. 20 bar | 0,65 g/cm³
Stainless steel cylinder 44 mm Ø : max. 15 bar | 0,76 g/cm³
min. contact gap type 03 : 75 mm
min. contact gap type 04 : 85 mm
min. contact gap type 09 : 75 mm

Switching contacts and switching capacity

Changeover contact : max. 3x | 60W/VA
normally open : max. 5x | 100 W / VA
Normally closed contact : max. 3x | 60 W/VA

EFV2 20…230V

Conductive electrodes with 24...230 V direct connection

The overfill protection EFV2 (24...230 V AC/DC) is approved by the "DIBt" as overfill protection for liquids hazardous to water.

Properties

connection : Polyesterdose (PO)
Protection class : IP 65
connection thread : G2"
Union nut : G2¾" | S 100x8
Material Screw connection : PE, PVC, PPH, PVDF
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Kohlestifte
Operating pressure : atmosphärisch
Resistance value of line monitoring : 100 kΩ
Adjustable sensitivity range : 2..100 kΩ

Operating temperature

PE : atmosphärisch
PVC : atmosphärisch
PPH : 90 °C
PVDF : 100 °C

Power supply

nominal voltage : 24...230 V AC/DC
Power consumption : ≤ 2 W

Output

potential-free changeover contacts : 2
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 5 A AC / 5 A DC
Switching capacity : max. 750 VA / 90 W
displays : Betriebs- LED grün Funktions-LED rot
Switching delay : ca. 0,5 s

MKL

Magnetic Flap Indicator

The MKL level indicator is connected by its two connections to the container to be monitored (see connection example). According to the law of interconnected containers the level in the float chamber corresponds exactly to the level in the container

Properties

connection : Flansch ab DN 15
Material : rostfreier Edelstahl, PVC, PPH, PVDF
Material flange : Edelstahl 1.4571, C22.8
Material Float : Edelstahl, Titan, PVC, PPH, PVDF
Number of contacts : beliebig
Contact load : max 10 VA, max 230 V AC
Display length : max. 6m

Operating temperature

PTFE seal : max. 150 °C
Stainless steel: Klingerit seal : max. 200 °C
PVC : max. 60 °C
PPH : max. 90 °C
PVDF : max. 130 °C

Stainless steel float

Weight : ~ 300 g
Dimensions : Ø 52 x 270
Operating pressure : 16 bar
media density : ρ ≥ 0,70 g/cm³

Stainless steel float

Weight : ~ 320 g
Dimensions : Ø 52 x 270
Operating pressure : 40 bar
media density : ρ ≥ 0,75 g/cm³

Titanium float

Weight : ~ 180 g
Dimensions : Ø 52 x 150
Operating pressure : 16 / 40 bar
media density : ρ ≥ 0,73 g/cm³

PVC float

Weight : ~ 331 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,8 g/cm³

PPH float

Weight : ~ 283 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,69 g/cm³

PVDF float

Weight : ~ 352 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,85 g/cm³

T-20X

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ZMF-202e-IR

Robust propane gas sensor for industrial applications with extended operating temperature range and ATEX / SIL-2

The ZMF-202e-IR is a propane sensor for measuring propane concentration in harsh environments.

Properties

Operating conditions : -40 °C…+60 °C
Storage conditions : -40 °C…+85 °C
RelativeHumidity : 0…95 % nicht kondensierend
Measurement method : NDIR (dual beam technology)
Certification : SIL2, ATEX
Signal output : 4..20mA
Power supply : 12…24 V DC
Housing : Edelstahl
Standard cable length : 1,5 m
pressure conditions : 800...1200 mbar
screw thread : M46x1,5

Measuring ranges

in ppm : in vol%
0...17.000ppm : 0…1,7 vol% (100 % LEL)
0...21.000ppm : 0…2,1 vol%

Options

Other cable lengths on request :
ATEX certification (optional) :

NP-25X

Pneumatic level switch

Reliable & simple probe for sensing aggressive, sticky or heavily contaminated liquids, especially suitable as overflow protection.

Properties NP-250 | NP-252

Connection head : PA
Protection class EN60529 Connection head : IP 54
connection thread : ab G½”
Container connection flange : ab DN 25
Pitot tube material : PVC
Material Screw connection : PVC
Material flange : PVC
Hose Ø : 16 mm / 25 mm
Operating temperature : max. +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching voltage silver : 250 V AC
Switching voltage gold : 24 V AC
Switching current silver : 6 A
Switching current gold : 100 mA

Properties NP-251 | NP-253

Connection head : PS
Protection class EN60529 Connection head : IP 54
connection thread : ab G½”
Container connection flange : ab DN 25
Pitot tube material : 1.4571
Material Screw connection : 1.4571
Material flange : 1.4571
Hose Ø : 15 mm / 28 mm
Operating temperature : max. +60 °C
medium temperatur : max. +90 °C
Contact : Wechsler
Switching voltage silver : 250 VAC
Switching voltage gold : 24 V AC
Switching current silver : 6 A
Switching current gold : 100 mA

TPS-Serie

Sensors for determining the dew point in a wide range of applications

The dew point sensors of the enable direct measurement of the dew point and ambient temperature indoors and outdoors.

Operating conditions

Temperature: : -40...80°C
rel. Humidity : 0 - 100% rH

Measuring range

measuring range (dew point) : -50...+80°C
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V oder 4...20mA

T207

Magnetic immersion probes made of PPH

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ZT Serie

Reliable pressure measurement and optimum process monitoring with the ZT series

From low to high pressure and suitable for liquid and gaseous media.

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

T204-0

Magnetic immersion probe made of stainless steel (1.4571) as a cable tail variant

For use with highly aggressive liquid media to detect level limit values in containers. Suitable for use in hazardous areas, zone 0 (category 1).

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

TK-32X

Luminous Row Displays

Luminous row displays of type series TK-320...TK-322 are used for visually displaying process states such as filling levels.

Type

TK-320 : Schaltschrankeinbaugehäuse 24 x 96 mm
TK-321 : Schaltschrankeinbaugehäuse 24 x 96 mm
TK-322 : 19” Karteneinschub 7 TE, 3 HE

Properties

Protection class EN60529 : IP 52
Operating temperature : – 20 °C...+60 °C
nominal voltage : 24 V DC...230 V AC
Input : 0(4)...20 mA | 0(2)...10 V DC | 5...10kΩ
Output : 4...20 mA | Bürde max. 500 Ω
Relay : 2 x Umschalter max. 230 V | min. 5 V | max. 3 A | min 1 mA

Display

Number of LEDs : 33 (rot/grün); 32 (TK-322)
Resolution : ca. 3,5 %
Error : ± 1 LED
connection : Schraubklemmen
connection TK-322 : Steckerleiste
Input : 0(4)...20 mA | 0(2)...10 V DC | 5...10kΩ
Output : 4...20 mA | max. load 500 Ω
Relay(2xSwitch) : max. 230 V | min. 5 V
Relay(2xSwitch) : max. 3 A | min. 1 mA

KS-210 KS-220

Compact sensors for temperature & humidity measurement

The KS series sensors are modular temperature and humidity measurement sensors in compact housings for use in almost any application.

Properties KS-210

Operating voltage : 12...30V DC
Power consumption : < 15mA

Properties KS-220

Operating voltage : 24V DC
Loop voltage min: : Bürde(Ohm) *0,02 + 8 V
Loop voltage max: : 30V

General properties

Housing : Aluminium, eloxiert
Dimensions (in mm) : 135 x Ø 19,2

Measuring range

measuring range (Humidity) : 0…10% rH
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V | 4...20mA

NP-256

Level Switch - multiple 2...4 - pneumatic (hose)

very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated

Properties

Protection class EN60529 : IP 54
connection thread : ab G2”
Union nut : ab G2¾”
Container connection flange : ab DN 25
HoseØ : 13x2 mm
Operating temperature : +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching capacity : 500 VA
Switch-on point (Viton membrane) : 150 mm WS ±30 mm
Switch-off point (MembraneViton) : 90 mm WS ±30 mm

Material

Hose : PVC
Screw fitting/grommet : PVC
flange : PVC
Connection head : PVC

Switching voltage

silver : max. 250 V AC
Gold : max. 24 V AC

Switching current

silver : max. 6 A
Gold : max. 100 mA

XR-4x0 | XR-4x1

Electrode relay with ATEX

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Quiescent current : umschaltbar
Weight : ca. 250 g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

ZDS-N

Precision pressure switch for low pressure applications

Can be used in oil, brake fluid, diesel, air and other gases. With very good stability and overpressure resistance.

technical properties

Pressure range : 0...500mbar gestuft
supply : 12 - 24 V DC
Output : Relais 230 V/1A
overload : 2 x Messbereich
Med. connection : Schlauch
electrical connection : Schraubklemme
feature : Tasten, LCD-Anz.

DS-CAN-01

CANopen pressure transmitter with CAN bus signal output

Versatile, media-compatible pressure transmitter with CAN bus interface.

technical properties

Pressure type : Relativdruck gegen Umgebungsdruck bzw. gegen interne Atmosphäre
measuring resolution : 10 Bit
Measuring accuracy : Klasse 0,5 bei RT
Total error : < 1,5 % v.E bei -10 °C … +80 °C.
measuring grid : ab 5 ms
CAN protocol : CANopen 2.0 A
Physical Layer : nach DIN 11898

ambient conditions

Operating temperature range : -40 °C … +80 °C
Storage temperature range : -40 °C … +120 °C
Shock resistance : 30 g, Dauer
Vibration resistance : 10 g bei 20-1000 Hz
EMC/ESD : EN 50082-1 und EN 50082-2
Duration : 14 ms bei RT

Pressure measuring ranges

kPa : bar
0...500 : 0…5
0...1.000 : 0…10
0...2.000 : 0…20
0...5.000 : 0…50
0...10.000 : 0…100
0...35.000 : 0…350
0...50.000 : 0…500
0...70.000 : 0…700
0...200.000 : 0…2.000
0...400.000 : 0…4.000
Standard pressure range : in kPa
Non-standard ranges : auf Anfrage erhältlich

EF 3…5 24 V

Conductive electrodes with 24 V DC direct connection

The conductive electrodes EF3...5 are approved by the "DIBt" as overfill prevention devices for liquids hazardous to water.

Properties

connection : integrierter Anschlusskopf
Protection class : IP 65
connection thread : G 1¼"
Material Screw connection : PPH
Material electrode rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal
material coating : PTFE
Coating length : voll = ganzer Stab (10 mm am Stabende sind blank) teil = ca. 250 mm von oben
Rod diameter : 4 mm, 6 mm
rod length : max. 6 m
Operating temperature : 85 °C
Operating pressure : atmosphärisch
Spacer : ab Länge > 1000 mm je 1000 mm 1 Abstandshalter

Properties electronic part

Operating temperature : –20...+85 °C
Storage temperature : –30...+85 °C
nominal voltage : 24 V DC ± 15%
Power consumption : max. 2 W (Klemme A1, A2)
Switching voltage : max. 250 V AC, 150 V DC min. 5 V DC (Relais mit Kombi-Goldkontakten)
Switching current : max. 3 A AC, 3 A DC min. 1 mA
Switching capacity : max. 750 VA, 150 W
Sensitivity : 3k ... 100 kΩ in vier Stufen (3 k, 10 k, 30 k, 100 kΩ) wählbar

NSP-X-E

Vibrating Limit Switch

The vibrating limit switch is a level limit switch for all kinds of fluids and is used in tanks, containers and pipelines.

Properties

Protection class EN60529 : IP 65/IP 67
Operating pressure : ≤ 40 bar
media density : ρ ≥ 0,7 g/cm³
Viscosity : max. 10000 mm²s
Rated current : < 15 mA
Protection class : III
Output : PNP
power : kurzschlussfest, überlastsicher
Display : LED (grün, rot)
Switching delay (cover) : ca. 0,5 s
Switching delay (release) : ca. 1 s

NSP-1-E

connection thread : G 1”
Operating temperature : –40...+150 °C
Storage temperature : –40...+85 °C
nominal voltage : 10...55 V DC (verpolsicher)
Current output : ≤ 350 mA

NSP-2-E

connection thread : G ½”
Operating temperature : –40...+100 °C
Storage temperature : –20...+70 °C
nominal voltage : 10...35 V DC (verpolsicher)
Current output : ≤ 250 mA

KG-2XX

Capacitiv Limit Switch

Capacitive limit switches respond on approach of solid and liquid media.

Properties KG-201

Operating voltage : 20...250 V AC
Switching version(*standard) : *Schließer | Öffner
connection : 2-Leiter
nominal voltage : 110 VAC
No-load current : typ. 2,5 mA
Min. switching current : typ. 5 mA
Max switching current : 330 mA
Max. Voltage drop with "ON" : typ. 6 V
Min. switching capacity : 0,55 V A
Max. switching capacity : 36,3 V A
Switching distance(mm) : 3...30
Switching hysteresis : typ. 10%
Repeatability atTa=const. : typ. 0,1 %
Drift : < 10%
Switching frequency : max. 25 Hz
Switching indicator : LED rot, eing.
Permanent short-circuit protection : nein
Permissible ambient temperature : –25...+70 °C

Properties KG-200|KG-202

Operating voltage : 20...250 V AC
Switching version(*standard) : *Schließer | Öffner
connection : 2-Leiter
nominal voltage : 220 VAC
No-load current : typ. 2,5 mA
Min. switching current : typ. 5 mA
Max switching current : 330 mA
Max. Voltage drop with "ON" : typ. 6 V
Min. switching capacity : 1,1 V A
Max. switching capacity : 72,6 V A
Switching distance(mm) : 3...20
Switching hysteresis : typ. 10%
Repeatability atTa=const. : typ. 0,5 %
Drift : < 10%
Switching frequency : max. 25 Hz
Switching indicator : LED gelb, intern
Permanent short-circuit protection : nein
Permissible ambient temperature : –20...+60 °C

properties KG-211

Operating voltage : 10...35 V DC
Permissible ripple : 10 %
Switching version(*standard) : *Schließer, Öffner
connection : 3-Leiter
nominal voltage : 24 V DC
No-load current : typ. 15 mA
Max switching current : 400 mA
Max. Voltage drop with "ON" : 2,5 V
Max. switching capacity : 14 W
Switching distance(mm) : 3...30
Switching hysteresis : < 10%
Repeatability atTa=const. : < 0,1%
Drift : < 10%
Switching frequency : max. 50 Hz
Switching indicator : LED rot, eing.
Reverse polarity protection : ja
Permanent short-circuit protection : ja
Permissible ambient temperature : –25...+70°C

Properties KG-210|KG-212

Operating voltage : 10...35 V DC
Permissible ripple : 10 %
Switching version(*standard) : *Schließer, Öffner
connection : 3-Leiter
nominal voltage : 24 V DC
No-load current : typ. 15 mA
Max switching current : 400 mA
Max. Voltage drop with "ON" : 2,5 V
Max. switching capacity : 14 W
Switching distance(mm) : 3...25
Switching hysteresis : < 10%
Repeatability atTa=const. : < 0,5%
Drift : < 10%
Switching frequency : max. 50 Hz
Switching indicator : LED gelb, intern
Reverse polarity protection : ja
Permanent short-circuit protection : ja
Permissible ambient temperature : –20...+60°C

HD-1XX

Hydrostatic filling level measurement

Continuous and precise level measurement in unpressurised, open basins and tanks as well as underground applications such as shafts, wells and boreholes.

ES-22

electronic safety pressure limiter with 2 safety functions

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

T209

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

MTA

Mechanical tank level indicator

The tank level indicator is a mechanically actuated indication operating "on the spot”. It permits a high degree of safety and flexibility thanks to separate points of measurement and indication.

Properties