Home
Cart

Cart

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

4 article(s) in your cart
pos.	image	product	Configure	Actions
1		FDL400
2		ZT Serie
3		TSL-CAN-03
4		EFV2 24V

EFV2 24V configure

1 Sicherheitsfunktion

2 Verstellbar

3 Elektrodenanzahl

4 Verschraubungsmaterial

5 Stabmaterial

6 Anschluss

7 Anschlussgewinde

8 Kabelbruchwiderstand

9 Auswerteelektronik

10 Standaufnehmerlänge

11 SIL

Amount

additional infomation

FDL400

Flow Data Logger

The FDL400 "Flow Data Logger 400" measuring device is suitable for measuring the flow of water and wastewater in fully or partially filled sewers or pipes of various geometries.

Properties

Housing : Aluminium
Protection class : IP30
Dimensions : 197 x 153 x 37,5mm (B x H x T)
Temperature range : 0 – 50°C
Supply voltage : 24V DC +/-20%
Power consumption : 120mA – 220mA
Reverse polarity protection : ✓
Display : 4x20

Outputs

analog 0(4)–20mA : 3x
digital : 4x
fixed for alarm : 1x
free configurable : 3x

display of measured value

Flow velocity :
Filling level :
flow :
flow rate :

ZT Serie

Reliable pressure measurement and optimum process monitoring with the ZT series

From low to high pressure and suitable for liquid and gaseous media.

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

TSL-CAN-03

Temperature sensor with CAN bus interface for air temperature measurement

CANopen transmitter for temperature measurement in media, semiconductor sensor

Properties

Measuring range : -40…+80 °C
deviation : ± 0,3 K (10...80 °C)
Measuring element : Halbleiter-Diodenfühler
measuring resolution : 0,1 K
measuring grid : ab 5 ms

ElectricalConnection

CAN protocol : CANopen 2.0 A, nach ciA DS 404
Physical Layer : nach DIN 11898
Operating voltage : 10...48 V

Operating conditions

Operating temperature : -40...+80 °C
Storage temperature : -40°C...+120°C
Shock resistance : 30g, Dauer: 14 ms bei Raumtemperatur
Vibration resistance : 10g bei 20 bis 1000 Hz
Minimumairspeedrequiredformeasurementacrossthesensor : 1,5 m/s

EFV2 24V

adaptive conductive electrodes with and without 24 V direct connection

The conductive electrode EFV2 is approved by the "DIBt" as an overfill prevention device for liquids hazardous to water.

Connection

Box : Polyesterdose (PO)
Cable : Kabel (TPK)
Plug : Stecker (ST)

Properties

Protection class : IP 65
connection thread : G2"
Union nut : G2¾", S 100x8
Material Screw connection : PE, PVC, PPH, PVDF
Material Sensor rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal, Kohlestifte
Operating temperature : PE, PVC: atmosphärisch PPH : 90 °C, PVDF: 100 °C
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ je nach Ausführung