Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

5 article(s) in your cart
pos.	image	product	Configure	Actions
1		ZS-Serie
2		ÜTA-32
3		BK-380
4		T205 VA
5		DSM2420

ÜTA-32 configure

1 Float

2 Guide-rod

3 Length

Amount

additional infomation

BK-380 configure

1 Kontakt

2 Stecker

Amount

additional infomation

ZS-Serie

Differential pressure sensor for low pressure

Compact and robust differential pressure transmitter for measurement on air and other non-aggressive media

Properties

Pressure type : Differenzdruck
Housing : Aluminium
medium : Luft und nicht aggressive Gase

Measurement parameters

response time : < 2,5 s
Hysteresis : 0,1 %
Overload capacity : 4* fach bis 500 mbar, darüber 2* fach
Signal output selection : 0...10 V | 4...20 mA, 2-Leiter

Operating conditions

Operating voltage : 24 VDC/AC ±10 % (0...10 V) | 15...30 VDC (4...20 mA)
Operating temperature : -20...+50 °C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 4 mm oder 6 mm
Cable gland : PG 7

ÜTA-32

Overfuelling indicator

The top-mounted tank indicator is a mechanically operated, on-the-spot indicator. The liquid level in the tank located below the indicator is determined proportionately to the filling level and is indicated. Control of the level is easily achieved through the installation of switching contacts. The switching points for level control can be steplessly adjusted, on-the-spot and at any time.

Properties

connection : G 1” (andere Gewinde auf Anfrage)
max.length guide tube : siehe Diagramm
Operating temperature : atmosphär. Bedingungen
Operating pressure : atmosphär. Bedingungen
media density : siehe Eintauchtiefe
Number of contacts : beliebig
Contact load : max. 10 VA, max. 230 V AC
Length : max. 1750 mm

Material

Sight tube : PVC transparent
connection : PVC-Verschraubung mit PTFE-Stangenführung
Guide rod : Edelstahl, Titan, Hastelloy B, Hastelloy C oder PVCRohr
float : PE / PP

BK-380

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –25...+70 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm

Material

Housing : Polycarbonat
Mounting clip : V2A, Kabelbinder (PP)
Rivet : V2A
Screw connection : M 20 x 1.5, Polyamid

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 5...250 V AC/DC
Switching current : 1mA...6 A AC/DC
Switching capacity(min.) : 300 VA, 60 W
Switching capacity(max.) : 5 mW

T205 VA

Stainless steel magnetic immersion probes

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 65
Number of floats : max. 2x Typ 08
connection cable : Silikon Litze
Operating temperature : max. 100 °C
Operating pressure : max. 10 bar (Zylinder)
Number of contacts : max. 2 x Schließer/ Öffner wahlweise durch 180°-Drehung des Schwimmers bei 2 Schwimmern
Switching current : 1 A
Switching voltage : 250 V AC
Switching capacity : 50 W/VA
Sliding tube length : max. 1000 mm
media density : Typ 08: 0,78 g/cm³
float : Zylinder Edelstahl 1.4571 27 mm Ø
min. contact distance with several floats : 50 mm

DSM2420

Sensor for simultaneous measuring flow velocity and filling level

The DSM2420 sensor is a combined sensor for simultaneous measuring flow velocity and level in open or accessible closed channels of all types and shapes.

Properties

Dimensions : 180 x 48 x 36,5 mm ( L x B x H )
Weight : ca. 1,5 kg
Protection class : IP68
Cable length (standard) : 15 m
Bending radius : > 10 x D (Kabeldurchmesser 6,25mm) = > 62,5mm
Temperature range : 0°C ... 50°C
Mounting shoe material : V2A 1,5mm

Certificates

EX / ATEX : IBExU 04 ATEX 1256

Measuring principle

Flow velocity: Ultrasonic Doppler :
Filling level: Differential pressure :

Flow velocity

Measuring range : 0,01 - 4 m / s
Measuring accuracy : +/- 5 % vom Momentanwert im Kanal
Temperature drift : 0,1% / °C ( Meßspanne )
Temperature drift : 0,05% / °C ( Nullpunkt )
Output signal : 4 - 20 mA

Filling level

Measuring ranges : 0 –1 m ; 0 – 2 m ; 0 – 4 m
Measuring accuracy : < 0,2% v.E. Summe aus Nichtlinearität, Hysterese und Wiederholbarkeit
Temperature drift : 0,005% / °C v.E. Meßspanne
Temperature drift : 0,005% / °C v.E. Nullpunkt
Material : Al2O3 (96%) aktive Fläche
Output signal : 4 – 20 mA
Zero point : norm 4 mA ( +/- 3 % )

Our application engineers advise you personally, comprehensively and professionally!

Simply contact us by phone or e-mail!

Call us right away!

+49-6251-8462-0

contact form