Fluid.iO level measurement
As a customer, you benefit from our many years of experience in the development and manufacture of pressure measurement technology and floats of the most varied designs and materials. Therefore, we can offer a wide range of solutions for the detection, monitoring and control of all types of liquids: From classic level & level measurement, to particularly robust mechanical indicators as well as min-max controls with multiple limit contacts, to overfill protection & leakage probes in accordance with the Water Resources Act (WHG). At Fluid.iO you will find a custom-fit solution for your level measurement task.
overfill protection and leackage detector
- level measurement
- overfill protection and leackage detector
level
E-Serie
Conductive Electrodes with general approval for constructions
Conductive electrodes type EF2...5 are approved by the “DIBt” (German Institute for Structural Engineering) as liquid level limit switches for the overfill protection of containers for storing water-endangering liquids
- level measurement
- overfill protection and leackage detector
level
ELH-Serie
Suspension electrode as leakage probe
The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.
- level measurement
- overfill protection and leackage detector
level
EP
Plate Electrode as Leak Detector (conductive)
with general approval for constructions and EC-Type-Examination Certificate for Ex-zone 1(Cat. 2)
- level measurement
- overfill protection and leackage detector
level
T-200.L
Leakage probes with general building authority approval
The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.
- level measurement
- overfill protection and leackage detector
level
T200.F
Overfill protection for containers
Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.
Continious Level Measurement
- level measurement
- Continious Level Measurement
gauge pressure
HD-10X
Hydrostatic filling level measurement
The hydrostatic submersion probes are used for filling level measurements in water and in clean to slightly contaminated liquids as well as in acids, alkaline solutions or aggressive media.
- level measurement
- Continious Level Measurement
gauge pressure level
HD-11X
Hydrostatic filling level measurement
The hydrostatic installed screwed sensors are used for filling level measurements in water and in clean to slightly contaminate liquids as well as in acids, alkaline solutions or aggressive media.
- level measurement
- Continious Level Measurement
level
LU-1X0
Compact Ultrasonic Level Sensor
The LU-150 is a short-range integrated ultrasonic level transmitter, intrinsically safe as Ex-version LU-180. This general purpose, 2 wire, 4 to 20 mA loop powered transmitter is ideal for liquids, slurries, and bulk materials in open or closed vessels to 5 m (16.4 ft).
- level measurement
- Continious Level Measurement
level
TK-30X
Liquid Level Measuring Instruments Series
T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.
Point Level Measurement
- level measurement
- Point Level Measurement
level
Ex-QFS-3x
Mercury-free float switches with Ex approval
These float switches have a mercury-free switching system consisting of a microswitch and a ball which actuates this switch.
- level measurement
- Point Level Measurement
level
KG-2XX
Capacitiv Limit Switch
Capacitive limit switches respond on approach of solid and liquid media.
- level measurement
- Point Level Measurement
level
NP-255
Level Switch - multiple 2...4 - pneumatic
very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated
- level measurement
- Point Level Measurement
level
NP-256
Level Switch - multiple 2...4 - pneumatic (hose)
very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated
- level measurement
- Point Level Measurement
level
NP-25X
Pneumatic level switch
Reliable & simple probe for sensing aggressive, sticky or heavily contaminated liquids, especially suitable as overflow protection.
- level measurement
- Point Level Measurement
level
NSP-X-E
Vibrating Limit Switch
The vibrating limit switch is a level limit switch for all kinds of fluids and is used in tanks, containers and pipelines.
- level measurement
- Point Level Measurement
level
QFS-12
Two-Point Float-Switch
With the two-point float switch Type QFS-12 can be realized pump controls in liquid media on a simple way.
- level measurement
- Point Level Measurement
level
QFS-1X
Float switch with reed switch (mercury-free)
Inside the float, one or two reed contacts with a movable permanent magnet are inserted as a switching element.
- level measurement
- Point Level Measurement
level
QFS-2X
Stainless Steel Float Switch
QFS-20 & QFS-21 float switches have stainless steel floats and one or two reed contacts.
- level measurement
- Point Level Measurement
level
QFS-40
Built-in float switch
The QFS-40 built-in float switch is designed for low-cost monitoring of liquids in containers.
- level measurement
- Point Level Measurement
level
QFS-55
Teflon float switch in rod design
The float switch combination is built with float switches of the QFS-50 and QFS-60 series. This makes it possible to control a level in a simple way.
- level measurement
- Point Level Measurement
level
QFS-5x | QFS-6x
Teflon float switch for all kinds of liquids up to 150°C
The float of the QFS-50 and QFS-60 float switches is made of Teflon. Inside the float, one or two reed contacts with a movable permanent magnet are inserted as a switching element.
- level measurement
- Point Level Measurement
level
QFSK-2X
Stainless steel float switch combination
Float switch combinations QFSK for level monitoring & level control with maximum and minimum contact sensor.
- level measurement
- Point Level Measurement
level
T-20X
Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)
Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers
- level measurement
- Point Level Measurement
level
T20X-0 Ex
Magnetic immersion probes with TÜV 02 ATEX 1795X approval for Ex zone 0
Magnetic immersion probes for detecting fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (category 1) is present in the gas space above the liquid and zone 1 (category 2) outside the container in the area of the junction box
Mechanical Indicators
- level measurement
- Mechanical Indicators
level
BK-3X0
Bistable change-over contact
Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.
- level measurement
- Mechanical Indicators
level
GSB-390
Glass float with magnet insert
for actuating monostable and bistable contacts
- level measurement
- Mechanical Indicators
level
MKL
Magnetic Flap Indicator
The MKL level indicator is connected by its two connections to the container to be monitored (see connection example). According to the law of interconnected containers the level in the float chamber corresponds exactly to the level in the container
- level measurement
- Mechanical Indicators
level
MTA
Mechanical tank level indicator
The tank level indicator is a mechanically actuated indication operating "on the spot”. It permits a high degree of safety and flexibility thanks to separate points of measurement and indication.
- level measurement
- Mechanical Indicators
level
PPS-390
PPH float with magnet insert
for actuating monostable and bistable contacts
- level measurement
- Mechanical Indicators
level
PVG-399
PVC weight with magnet insert and eyelet for cable fixing
for actuating monostable and bistable contacts
- level measurement
- Mechanical Indicators
level
PVS-390
PVC float with magnet insert
for actuating monostable and bistable contacts
- level measurement
- Mechanical Indicators
level
ÜTA-32
Overfuelling indicator
The top-mounted tank indicator is a mechanically operated, on-the-spot indicator. The liquid level in the tank located below the indicator is determined proportionately to the filling level and is indicated. Control of the level is easily achieved through the installation of switching contacts. The switching points for level control can be steplessly adjusted, on-the-spot and at any time.
- level measurement
- Mechanical Indicators
level
W-35X
Water Level Gauge with sight glass indicator
The water level gauge is particulary suitable for all liquid media which are aggressively hot and rapidly moved in a container, but are not too much contamined.
Our application engineers advise you personally, comprehensively and professionally!
Simply contact us by phone or e-mail!
