Description
The hydrostatic submersion probes are used for filling level measurements in water and in clean to slightly contaminated liquids as well as in acids, alkaline solutions or aggressive media.
Technical Data
Properties
- Protection class EN60529
- IP68
- CE marking
- siehe Konformitätserklärung
- Operating temperature
- -10...70 °C (PVC: -10...60 °C)
- Storage temperature
- -25...70 °C (PVC: -10...60 °C)
- Power supply
- 15...30 V DC
- power
- max. 25 mA
- Output
- 2-Leiter-Technik
- Measuring range
- 0,8...10 mWs (Standard)
- Overpressure
- abhängig vom Messbereich
- Deviation from characteristic curve
- Nichtlinearität, Hysterese, Reproduzierbarkeit nach IEC 60770 Standard: ≤± 2%
- Insulation resistance
- > 100 kΩ
- Short-circuit resistance
- permanent
- Reverse polarity protection
- keine Schädigung o. Funktion bei vertauschten Anschlüssen
Materials
- Housing
- Edelstahl 1.4571, PVC, PVDF
- Measuring cell
- Edelstahl 1.4404, Keramik Al2o3 96%, Keramik Al2o3 99,9%
- Seals
- FKM (Viton ®), EPDM, FFKM (Kalrez ®)
- Cable
- PVC (Ø 5,8 mm), PUR (Ø 5,9 mm) oder FEP (Ø 5,3 mm); 2 x 0,14 mm2 mit Luftschlauch und PTFE-Filter
HD-10X configuration
Your Configuration
- Basename
- HD10
- Gehäuse
- Messbereich
- Ausgangssignal
- Kabelart
- Kabellänge
- Abdichtung
- Sondermesszelle
Further product information
Areas of application: environmental engineering, water treatment, sewage plants, depth measurements in wells, open bodies of water, ground water level measurements as well as filling level measurements in open or pressure less tanks.
The housings are made of stainless steel 1.4571, PVC or PVDF. The sensor membranes are made of stainless steel 1.4404, ceramics Alo 96%, Alo 99,9%, the 2323 seals are made of FKM (Viton ®) as standard version.
Other sealing materials are EPDM or FFKM (Kalrez ®). PVC cables are provided by default as connections. Depending on the media resistance, you can also order FEP (Teflon ®) or PUR cables. Approval for use in Ex areas is being prepared.