Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

26 article(s) in your cart
pos.	image	product	Configure	Actions
1		NP-25X
2		T205 VA
3		ZT-V
4		T200.F-24V
5		TPS-210 TPS-220
6		ÜTA-32
7		QFS-2X
8		EFV2 24V
9		TK-303
10		TK-301 PTFE
11		ZMF-100-IR
12		ELH 24 V
13		EFV2 20…230V
14		QFS-3X
15		T201 PTFE
16		T209
17		ZMF-20x Serie
18		TK-101
19		T209-0
20		QFSK-2X
21		TK-309-0
22		HD-110 \| HD-112 \| HD-114
23		KS-410 KS-420
24		T201
25		ZDT-N
26		ZDS-H

NP-25X configure

1 Staurohrmaterial

2 Anschlussgewinde

3 Druckschaltermembran

4 Kontakt

5 Staurohrlänge

Amount

additional infomation

ZT-V configure

1 Measuring range

2 Output signal

3 Connection

4 Process connection

Amount

additional infomation

T200.F-24V configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schwimmermaterial

7 Anschluss-Elektronikteil

Amount

additional infomation

TPS-210 TPS-220 configure

1 Ausgangssignal

2 Schutzkappe

Amount

additional infomation

ÜTA-32 configure

1 Float

2 Guide-rod

3 Length

Amount

additional infomation

QFS-2X configure

1 Schwimmertyp

2 Kontakt

3 Kabelmaterial

4 Kabellänge

5 EX

Amount

additional infomation

EFV2 24V configure

1 Sicherheitsfunktion

2 Verstellbar

3 Elektrodenanzahl

4 Verschraubungsmaterial

5 Stabmaterial

6 Anschluss

7 Anschlussgewinde

8 Kabelbruchwiderstand

9 Auswerteelektronik

10 Standaufnehmerlänge

11 SIL

Amount

additional infomation

TK-303 configure

1 Gewinde

2 Schwimmerausführung

3 Anschluss

4 Rohrlänge

5 Auflösung

6 Explosionsschutz

7 Zubehör

Amount

additional infomation

TK-301 PTFE configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführungen

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

ZMF-100-IR configure

1 Output signal

2 Measuring range

Amount

additional infomation

ELH 24 V configure

1 Stabmaterial

2 Anschluss

3 Kabellänge

4 Kabelbruchwiderstand

5 Sondenkörper-Durchmesser

6 Anschlussgewinde

7 Sondenkörper-Material

8 Kabelmaterial

9 Auswerteelektronik

Amount

additional infomation

EFV2 20…230V configure

1 Verschraubungsmaterial

2 Stabmaterial

3 Anschluss

4 Anschlussgewinde

5 Elektronikteil

6 Standaufnehmerlänge

Amount

additional infomation

QFS-3X configure

1 Schwimmertyp

2 Kontakt

3 Schaltkontakt

4 Hysterese

5 Kabelmaterial

6 Kabellänge

7 EX

Amount

additional infomation

ZMF-20x Serie configure

1 Typ

2 Temperaturbereich

3 Messmethode

4 Signalausgang

5 Messbereich

6 Ex-Zulassung

Amount

additional infomation

TK-101 configure

1 ATEX

Amount

additional infomation

QFSK-2X configure

1 Schwimmertyp

2 Anschlussgewinde

3 Schwimmeranzahl

4 Stablänge

5 EX

Amount

additional infomation

TK-309-0 configure

1 Gewinde

2 Schwimmerausführung

3 Anschluss

4 Rohrlänge

5 Auflösung

6 Explosionsschutz

7 Zubehör

Amount

additional infomation

HD-110 | HD-112 | HD-114 configure

1 Gehäuse

2 Anschlussgewinde

3 Messbereich

4 Ausgangssignal

5 Steckverbindung

6 Abdichtung

7 Sondermesszelle

Amount

additional infomation

NP-25X

Pneumatic level switch

Reliable & simple probe for sensing aggressive, sticky or heavily contaminated liquids, especially suitable as overflow protection.

Properties NP-250 | NP-252

Connection head : PA
Protection class EN60529 Connection head : IP 54
connection thread : ab G½”
Container connection flange : ab DN 25
Pitot tube material : PVC
Material Screw connection : PVC
Material flange : PVC
Hose Ø : 16 mm / 25 mm
Operating temperature : max. +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching voltage silver : 250 V AC
Switching voltage gold : 24 V AC
Switching current silver : 6 A
Switching current gold : 100 mA

Properties NP-251 | NP-253

Connection head : PS
Protection class EN60529 Connection head : IP 54
connection thread : ab G½”
Container connection flange : ab DN 25
Pitot tube material : 1.4571
Material Screw connection : 1.4571
Material flange : 1.4571
Hose Ø : 15 mm / 28 mm
Operating temperature : max. +60 °C
medium temperatur : max. +90 °C
Contact : Wechsler
Switching voltage silver : 250 VAC
Switching voltage gold : 24 V AC
Switching current silver : 6 A
Switching current gold : 100 mA

T205 VA

Stainless steel magnetic immersion probes

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 65
Number of floats : max. 2x Typ 08
connection cable : Silikon Litze
Operating temperature : max. 100 °C
Operating pressure : max. 10 bar (Zylinder)
Number of contacts : max. 2 x Schließer/ Öffner wahlweise durch 180°-Drehung des Schwimmers bei 2 Schwimmern
Switching current : 1 A
Switching voltage : 250 V AC
Switching capacity : 50 W/VA
Sliding tube length : max. 1000 mm
media density : Typ 08: 0,78 g/cm³
float : Zylinder Edelstahl 1.4571 27 mm Ø
min. contact distance with several floats : 50 mm

ZT-V

Reliable pressure measurement and optimum process monitoring with the ZT series

From low to high pressure and suitable for liquid and gaseous media.

Connection

Signal output : 0...10 V, 3-Leiter | 0,5...4,5, ratiometrisch | 4...20 mA, 2-Leiter
Electrical connection : DIN EN 175301-803 A | DIN EN 175301-803 C | Binder M12x1 (Serie 713)
Process connection : G 1/4" ISO 1179-2 (Male Form E) | 1/4" NPT | 7/16" 20 UNF Male
measuring range (bar) : 0…0,6 | 0…600

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40°C...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

T200.F-24V

Overfill protection with 24V direct connection

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection

Polyester junction box : PO/ET-520
Polyethylene connection head : PE/ET-521

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating temperature : max. 80 °C
Operating pressure : atmosphärisch
media density : ρ ≥ 0,6 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Power supply

nominal voltage : 24 V DC (24…300V DC)
Power consumption : ≤ 1 W

Output

Output contact : 1 potentialfreier Wechselkontakt
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 3 A AC / 3 A DC
Switching capacity : max. 750 VA / 90 W

Optocoupler

Switching voltage : max. 30 V
Switching current : max. 100 mA
displays : Betriebs-LED grün, Funktions-LED rot
Switching delay : ca. 0,5 s Anzug/Abfall

TPS-210 TPS-220

Flexible, analogue dew point sensor

The dew point sensors of the enable direct measurement of the dew point and ambient temperature indoors and outdoors.

Properties TPS-210

Operating voltage : 12...30V DC
Power consumption : < 15mA

Properties TPS-220

Operating voltage : 24V DC
Loop voltage min: : Bürde(Ohm) *0,02 + 8 V
Loop voltage max: : 30V

General properties

Housing : Aluminium, eloxiert
Dimensions (in mm) : 135 x Ø 19,2

Measuring range

measuring range (Humidity) : 0…100% rH
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -50...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V | 4...20mA

ÜTA-32

Overfuelling indicator

The top-mounted tank indicator is a mechanically operated, on-the-spot indicator. The liquid level in the tank located below the indicator is determined proportionately to the filling level and is indicated. Control of the level is easily achieved through the installation of switching contacts. The switching points for level control can be steplessly adjusted, on-the-spot and at any time.

Properties

connection : G 1” (andere Gewinde auf Anfrage)
max.length guide tube : siehe Diagramm
Operating temperature : atmosphär. Bedingungen
Operating pressure : atmosphär. Bedingungen
media density : siehe Eintauchtiefe
Number of contacts : beliebig
Contact load : max. 10 VA, max. 230 V AC
Length : max. 1750 mm

Material

Sight tube : PVC transparent
connection : PVC-Verschraubung mit PTFE-Stangenführung
Guide rod : Edelstahl, Titan, Hastelloy B, Hastelloy C oder PVCRohr
float : PE / PP

QFS-2X

Stainless Steel Float Switch

QFS-20 & QFS-21 float switches have stainless steel floats and one or two reed contacts.

Properties

Protection class EN60529 : IP68
Material Float : VA 1.4571
Material hose : Edelstahlwellschlauch (1.4404) mit Edelstahldrahtumflechtung (1.4301)
Operating temperature : max. + 150 °C
media density : ρ ≥ 0,8g/cm³
Switching system : Reed-Schalter
Contact : Wechsler, NO, NC
Switching voltage : 4...250 V AC/DC
Switching current : 1 mA ...1 A
Switching capacity : max. 1A, 60 VA/60 W
Switching hysteresis : ca. 100 mm
Switching angle : ca. + 20° / – 20°
Operating pressure (QFS-20) : max. 15 bar
Operating pressure (QFS-21) : max. 6 bar

EFV2 24V

adaptive conductive electrodes with and without 24 V direct connection

The conductive electrode EFV2 is approved by the "DIBt" as an overfill prevention device for liquids hazardous to water.

Connection

Box : Polyesterdose (PO)
Cable : Kabel (TPK)
Plug : Stecker (ST)

Properties

Protection class : IP 65
connection thread : G2"
Union nut : G2¾", S 100x8
Material Screw connection : PE, PVC, PPH, PVDF
Material Sensor rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal, Kohlestifte
Operating temperature : PE, PVC: atmosphärisch PPH : 90 °C, PVDF: 100 °C
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ je nach Ausführung

Operating temperature

PE : atmosphärisch
PVC : atmosphärisch
PPH : 90 °C
PVDF : 100 °C

Technical specifications electronic part

Operating temperature : –20...+85 °C
Storage temperature : –30...+85 °C
nominal voltage : 24...30 V DC
Power consumption : max. 2 W
Switching voltage : max. 230 V AC / V DC min. 5 V DC (CMOS-Relais)
Switching current : max. 0,12 A AC / A DC min. <1 mA
Switching capacity : max. 25 VA / W
Sensitivity : 3k … 100 kΩ

TK-303

Level transmitter for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class : IP 65
Float type : 03, 04, 09
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar (Kugel) max. 15 bar (Zylinder)
Resolution : 7,5 mm | 10 mm
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 03 : 0,75 g/cm³
Type 04 : 0,65 g/cm³
Type 09 : 0,76 g/cm³

TK-301 PTFE

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 16
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 120 °C
Operating pressure : max. 3 bar
media density : 0,79 g/cm³
Resolution (depending on type) : 7,5 mm |10 mm | 15 mm | 20 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

ZMF-100-IR

gas detector with 4...20mA signal output

industrial CO2 sensor ZMF-100-IR with a measuring range of up to 50,000ppm

Product features

Measuring principle : optisch, NDIR (nicht-dispersive Infrarot-Absorptionsmessung)
Operating voltage : 24 V DC / 100 mA
Heating time : ca. 5 min
Response time : ca. 30 s
Repeatability : +/- 1%
Housing : Aluminium (rot) IP54
Weight : ca. 500g
Shaft range : 4,27 - 4,35 µm (4270-4350 nm)
Gas ingress : per Diffusion

ambient conditions

Operating temperature range : -10...+50 °C
Storage temperature range : -40...+100 °C
RelativeHumidity : 15..95 %
Air pressure : 900...1100 hPa

ELH 24 V

Hanging electrode as leakage probe 24 V DC

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

General data

Protection class : IP 68
Probe body material : PE, PVC, PPH, PVDF
Diameter probe body : 15 mm, 25 mm, 40 mm
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ

Material

Screw connection : PVDF
Cable : TPK ( PVC Basis)
on request : FEP (Teflon), PVC - blau
cable length : auf Wunsch (Standard 3 m)
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Glas-Kohlestifte

EFV2 20…230V

Conductive electrodes with 24...230 V direct connection

The overfill protection EFV2 (24...230 V AC/DC) is approved by the "DIBt" as overfill protection for liquids hazardous to water.

Properties

connection : Polyesterdose (PO)
Protection class : IP 65
connection thread : G2"
Union nut : G2¾" | S 100x8
Material Screw connection : PE, PVC, PPH, PVDF
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Kohlestifte
Operating pressure : atmosphärisch
Resistance value of line monitoring : 100 kΩ
Adjustable sensitivity range : 2..100 kΩ

Operating temperature

PE : atmosphärisch
PVC : atmosphärisch
PPH : 90 °C
PVDF : 100 °C

Power supply

nominal voltage : 24...230 V AC/DC
Power consumption : ≤ 2 W

Output

potential-free changeover contacts : 2
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 5 A AC / 5 A DC
Switching capacity : max. 750 VA / 90 W
displays : Betriebs- LED grün Funktions-LED rot
Switching delay : ca. 0,5 s

QFS-3X

Mercury-free float switch with µ-switch

Properties

Protection class EN60529 : IP 68
Cable entry : PVC , PTFE bzw. PVDF
Conductor cross-section : 3 x 0,75 mm², PUR 3x 0,5mm²
Operating pressure cylinder : max. 1 bar
Operating pressure sphere : max. 2 bar
Switching system : µ-Schalter
Contact : Wechsler, NO, NC

Material Float

QFS-30 : PPH (Polypropylen)
QFS-31 : PPH (Polypropylen)
QFS-34 : PE (Polyethylen)

Cable

TPK : PVC Basis Ø 5,9 mm
TPKV : PVC verstärkt Ø 7,3 mm
PUR : Polyurethan Ø 5,4 mm
SIL : Silikon Ø 6,4 mm
FEP : Teflon Ø 4,0 mm
AEM : Ethylen-Acrylat-Kautschuk

Cable length between float & attachment

TPK : 70 mm
TPKV : 90mm
PUR : 100mm
SIL : 80 mm
FEP : 110 mm
AEM : abhängig vom Innenkabel

Operating temperature

TPK(V), AEM : max. + 60 °C
PUR : max. + 70 °C
Silicone,Tefloncable with PE float : max. + 80 °C
Silicone, Teflon cable with PP float : max. + 85 °C

MaterialDensity

QFS-31 : ≥≥ 0,6 g/cm³
QFS-34 : ≥≥ 0,75 g/cm³
QFS-30 TPK(V) cable : ≥≥ 0,85 g/vcm³
QFS-30 PUR cable : ≥≥ 0,95 g/cm³
QFS-30 SIL cable : ≥≥ 0,90 g/cm³
QFS-30 FEP cable : ≥≥ 0,95 g/cm³
QFS-30AEM cable : ≥≥ 0,90 g/cm³

T201 PTFE

Immersible Magnetic Probe made of PTFE

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

T209

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ZMF-20x Serie

Robust gas sensor for industrial applications with extended operating temperature range and wide-ranging approvals

The ZMF-20X series includes sensors & transmitters for measuring gas concentrations of various gases such as CO2, methane, propane and SF-6. This makes the sensors suitable for many applications. The ZMF-20X gas sensors are designed to be extremely rugged & suitable for use in harsh environments.

Properties

Operating conditions : -40 °C…+60 °C
Storage conditions : -40 °C…+85 °C
RelativeHumidity : 0…95 % nicht kondensierend
Measurement method : NDIR (dual beam technology)
Certification : SIL2-Zertifizierung, ATEX-Zertifizierung (auf Anfrage)
Signal output : 4..20mA
Power supply : 12…24 V DC
Housing : Edelstahl
Standard cable length : 1,5 m (weitere Längen auf Anfrage)
pressure conditions : 800...1200 mbar
screw thread : M46x1,5

TK-101

Measuring transducer (R/I-transducer)

The measuring transducer Tk101 and Tk101Ex are built directly into the connection boxes of our Liquid Level Measuring Instruments of type TK-30.

Properties

Operating temperature : -20...+60 °C
Storage temperature : -40...+80 °C
Ex-protection : siehe Zertifikat
CE marking : siehe Konformitätserklärung

Input

Resistance range in three-wire circuit : 4...10 kΩ
Measuring current : 0,8 mA @ RE = 4 kΩ
Measuring current : 0,33 mA bei RE = 10 kΩ
Measuring voltage : 3,3 V

Supply/Output

2-wire : 4...20 mA
Voltage(Um) : 11...28 V DC
Burden / load : 0...800 Ω |RBürde max = [(Um - Um min) / 0,02] Ω
Output signal in case of error : max. 24 mA

Fault influences

Max. Total error : ± 1 %
Temperature influence : -0,015 % / °C
Supply voltage influence : 0,025 % / V

Setting range

Full deflection : 60...105 %
Zero point adjustment : 0...25 %

T209-0

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : PO-Dose oder AA-Dose
Protection class : IP 65 Dose
Float type : max. 6x Kugel Edelstahl 105 mm Ø
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar
media density : 0,54 g/cm³
Number of contacts : max. 7x Wechsler / max. 10x Schließer / 7x Öffner
Switching current : 1A, 2A
Switching capacity : Wechsler 60W/VA | Schließer 100 W/VA | Öffner 60 W/VA
min. contact distance with several floats : 125 mm

QFSK-2X

Stainless steel float switch combination

Float switch combinations QFSK for level monitoring & level control with maximum and minimum contact sensor.

Properties

Protection class EN60529 : IP 68
Material Float : VA 1.4571
Material hose : Edelstahlwellschlauch (1.4404) mit Edelstahldrahtumflechtung (1.4301)
rod length : max. 5 m
Number of floats : bis 5
Operating temperature : max. + 150 °C
media density : ρ ≥ 0,8g/cm³
Switching system : Reed-Schalter
Contact : Wechsler, NO, NC
Switching voltage : 4...250 V AC/DC
Switching current : 1 mA ...1 A
Switching capacity : max. 1A, 60 VA/60 W
Switching hysteresis : ca. 100 mm
Switching angle : ca. + 20° / – 20°
Ex-protection : optional; IBExU10ATEX 1089
Operating pressure WFSK-25 : max. 15 bar
Operating pressure QFSK-26 : max. 6 bar

TK-309-0

Stainless steel level sensor for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class Socket : IP65
Float type : Typ 07
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar
media density : Typ 07: 0,54 g/cm³
Resolution : 7,5 mm | 10mm |15 mm | 20 mm
Accessories : R/I-Wandler TK-101

HD-110 | HD-112 | HD-114

Hydrostatic screw-in probes (4...20mA | 0.8...10mWS)

Continuous and precise level measurement in unpressurised, open basins and tanks as well as underground applications such as shafts, wells and boreholes.

Properties

Protection class EN60529 : IP 65
Operating temperature : -10...70 °C
Storage temperature : -25...70 °C
Power supply : 15...30 V DC
power : max. 25 mA
Output : 2-Leiter-Technik | 4...20 mA
Measuring range : 0,8...10 mWs (Standard)
Overpressure : ca. 20 %
Deviation from characteristic curve : Nichtlinearität,
Insulation resistance : > 100 kΩ
Short-circuit resistance : permanent
Reverse polarity protection : keine Schädigung o. Funktion bei vertauschten Anschlüssen

Materials

Housing : Edelstahl 1.4571, PVC, PVDF
Measuring cell : Edelstahl 1.4404, Keramik AI2o3 96%, Keramik AI2o3 99,9%
Seals : FKM (Viton ®), EPDM, FFKM (Kalrez ®)
connection thread : G ¾“ | G 1 ½“
Plug : Steckverbindung DIN 43650

KS-410 KS-420

Sensors for temperature & humidity measurement in aluminium or polycarbonate housing

The KS series sensors are modular temperature and humidity measurement sensors in compact housings for use in almost any application.

Specifications

Housing shapes : Stabform | Alu- oder Polycarbonatgehäuse
measurands : Temperatur | relative Feuchte
Measuring range : -40...+80 °C | 0...100% rH
Signal output : 0...10 V oder 4…20 mA
Power supply : 12...30 V DC | 24 V DC

properties KG-410

Operating voltage : 12...30V DC
Power consumption : < 15mA

properties KG-420

Operating voltage : 24V DC
Loop voltage min: : Bürde(Ohm) *0,02 + 8 V
Loop voltage max: : 30V

General properties

Housing : Alu-Gehäuse mit Edelstahlstab oder Polycarbonat
Dimensions (LxBxH in mm) : 30 x 45,4 x 97,3
Protection type/class : Gehäuse IP66, Stecker IP 67
Weight : 96g

Measuring range

measuring range (Humidity) : 0…10% rH
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V | 4...20mA

T201

Immersible Magnetic Probe made of stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil