Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

43 article(s) in your cart
pos.	image	product	Configure	Actions
1		T209-0.F
2		ZT-N
3		ES-21
4		KS-Serie
5		EP
6		TRM-100
7		ViscoScope® VA-100
8		T204-0
9		DSM2420
10		ZMF-20x Serie
11		BK-380
12		FluidIX Lub-6
13		ELH 24 V
14		ZCS-5000
15		TK-312
16		TK-301
17		ÜTA-32
18		TPS-410 TPS-420
19		NSP-X-E
20		T205 PP
21		BK-390
22		ER-104
23		TK-304
24		TK-303
25		LU-180 EX
26		TK-309-0
27		TK-301 PTFE
28		TK-302
29		W-35X
30		LU-1X0
31		ER-214
32		ZDS-Serie
33		T201 PTFE
34		ZMF-203e-IR
35		T209
36		ZMF-200e-IR
37		T205-0.F
38		NP-256
39		EF2 24...230 V
40		T-20x.F 230V
41		TSR-CAN-03
42		Fluidix Lub-VDT
43		TK-307-0

ZT-N configure

1 Measuring Range

2 Output Signal

3 Electrical Connection

4 Process Connection

Amount

additional infomation

ES-21 configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

additional infomation

EP configure

1 Sondenkörpermaterial

2 Stabmaterial

3 Kabellänge

4 Leitungsüberwachungswiderstand

5 Kabelmaterial

6 Ex-Zulassung

Amount

additional infomation

TRM-100 configure

1 Material

2 Measuringrange

3 Connection

4 Flange

5 Sealing

Amount

additional infomation

ViscoScope® VA-100 configure

1 Viscosity

2 Temperature

3 Process-Connection

4 Material

5 Ex-Area

Amount

additional infomation

ZMF-20x Serie configure

1 Typ

2 Temperaturbereich

3 Messmethode

4 Signalausgang

5 Messbereich

6 Ex-Zulassung

Amount

additional infomation

BK-380 configure

1 Kontakt

2 Stecker

Amount

additional infomation

ELH 24 V configure

1 Stabmaterial

2 Anschluss

3 Kabellänge

4 Kabelbruchwiderstand

5 Sondenkörper-Durchmesser

6 Anschlussgewinde

7 Sondenkörper-Material

8 Kabelmaterial

9 Auswerteelektronik

Amount

additional infomation

TK-312 configure

1 Housing

Amount

additional infomation

TK-301 configure

1 Material Rohr und Verschraubung

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

ÜTA-32 configure

1 Float

2 Guide-rod

3 Length

Amount

additional infomation

TPS-410 TPS-420 configure

1 Ausgangssignal

2 Gehäuse

Amount

additional infomation

NSP-X-E configure

1 Messbereiche

2 Gabeloberfläche

Amount

additional infomation

BK-390 configure

1 Rohr-Außendurchmesser

2 Kontakt

3 Stecker

Amount

additional infomation

TK-304 configure

1 Gewinde

2 Schwimmerausführung

3 Anschluss

4 Rohrlänge

5 Auflösung

6 Zubehör

Amount

additional infomation

TK-303 configure

1 Gewinde

2 Schwimmerausführung

3 Anschluss

4 Rohrlänge

5 Auflösung

6 Explosionsschutz

7 Zubehör

Amount

additional infomation

LU-180 EX configure

1 Typ

Amount

additional infomation

1 Anschlussmaterial

2 Rohrmaterial

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schwimmermaterial

7 Anschluss-Elektronikteil

8 Länge

Amount

additional infomation

TSR-CAN-03 configure

1 Temperaturbereich

2 Prozessanschluss

3 Messspitzenlänge

Amount

additional infomation

Fluidix Lub-VDT configure

1 Signalausgang

2 Messbereich

Amount

additional infomation

TK-307-0 configure

1 Anschluss

2 Rohrlänge

3 Auflösung

4 Explosionsschutz

5 Zubehör

Amount

additional infomation

T209-0.F

Magnetic immersion probe overfill protection for Ex zone 0 (Cat. 1)

The magnetic immersion probes T20... are used to detect fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (cat. 1) is present in the gas space above the liquid and Ex zone 1 (cat. 2) is present outside the container, in the area of the junction box.

Properties

connection : Polyesterdose, Aluminiumdose
Protection class : IP 65 Dose
Float type : Kugel Edelstahl 105 mm Ø
Sliding tube length : max. 6000 mm
Operating temperature : max. 135°C
Operating pressure : max. 20 bar
media density : 0,54 g/cm³
F-Contact : 1 / 12 kΩ
Number of additional contacts : 6x Wechsler, 9x Schließer, 6x Öffner
Switching current : 1A, 2A ( nur mit Schirmung)
Switching capacity : Wechsler: 60 W/VA, Schließer: 100 W/VA Öffner: 60 W/VA
min. contact distance with several floats : 125 mm

ZT-N

Customisable low pressure sensor for precise measurement of the smallest pressures

Reliable low pressure sensor in a robust and compact design

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

ES-21

Electronic safety switching device with 1 safety function

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

KS-Serie

Sensors for temperature & humidity measurement

The KS series sensors are modular temperature and humidity measurement sensors in compact housings for use in almost any application.

Specifications

Housing shapes : Stabform | Alu- oder Polycarbonatgehäuse
measurands : Temperatur | relative Feuchte
Measuring range : -40...+80 °C | 0...100% rH
Signal output : 0...10 V oder 4…20 mA
Power supply : 12...30 V DC | 24 V DC

EP

Plate Electrode as Leak Detector (conductive)

with general approval for constructions and EC-Type-Examination Certificate for Ex-zone 1(Cat. 2)

Properties

Protection class EN60529 : IP 68
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ
cable length : auf Wunsch

Material

Cable : TPK (PVC Basis)
Sensor rods : Edelstahl (1.4571) | Hastelloy B | Hastelloy C | Titan | Tantal | Glaskohlenstoff

Options

cable material : FEP (Teflon) | EX (PVC blau)

TRM-100

Turbidimeter (0...1.000 FNU or 500...4.000 FAU)

The turbidimeter TRM-100 is a compact device for measuring turbidity in liquids. The "turbidity" is measured using the scattered light method (angle 90 degrees) for the turbidity range of < 1,000 FNU (Formazine Nephelometric Units) and the transmitted light method (angle 0 degrees) for the turbidity ranges > 1,000 FAU (Formazine Attenuation Units).

Properties

Operating pressure : max. 10 bar @ 20 °C | max. 2,5 bar @ 60 °C
Measuring range : 500...4.000 FNU / FAU
Measuring accuracy : +/-5 %
Mounting position : horizontal
Process connection : DN 20 | DN 40
Flange connection : >= DN 20
number of senders : 2
number of receivers : 1

Material

Seal : EPDM | optional FPM (Viton)
Process connection : PVC | PPH
Measuring tube : Borsilikatglas mit Nano Beschichtung

Input

Power supply : 18...30 V DC
Power consumption : < 2 W

Output

Output contact : 4...20 mA
Switching delay (adjustable) : 1...10 s
Protection class : IP 65
Switching voltage : max. 250 V AC | max. 115 V DC
Switching current : max. 3 A
Switching capacity : max. 500 VA, 60 Watt
Potential-free changeover contact : 1 @ 1...10 s

ViscoScope® VA-100

Inline Viscometer

Maintenance-free inline viscosity sensor for precise and reliable real-time measurement of viscosity directly in the process.

Properties

Material : 1.4571 / 1.4404 (316Ti / 316L)
Protection class : IP65
Process temperature : -10°C … +130°C | (integriertes Pt100 im Messfühler)
max. process pressure : Vakuum ... 64 bar
Process connections : NPT | M48 | Varivent® | Tri-Clamp
Cable length sensor - transmitter : Max. 1.000 Meter
max. flow velocity : 5 m / sec
Ex approval : II 1/2G Ex ia IIC T6...T3 Ga/Gb | (optional)

Sensor types

Sphere : VA-100B
Cylinder : VA-100C

Repeatability

VA-100B : ± 0,5% | ± 1 Digit
VA-100C : ± 0,3% | ±1 Digit

Measuring ranges

VA-100C : 0,1 - 2.500 mPa·s x g/cm³
VA-100B : 10 - 25.000 mPa·s x g/cm³

Probe dimensions

VA-100C : Ø 32 x 145 mm
VA-100B : Ø 32 x 120 mm

installation positions

Reservoir :
tanks :
Pipe :
flow cell :
Installation is position-independent :

T204-0

Magnetic immersion probe made of stainless steel (1.4571) as a cable tail variant

For use with highly aggressive liquid media to detect level limit values in containers. Suitable for use in hazardous areas, zone 0 (category 1).

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

DSM2420

Sensor for simultaneous measuring flow velocity and filling level

The DSM2420 sensor is a combined sensor for simultaneous measuring flow velocity and level in open or accessible closed channels of all types and shapes.

Properties

Dimensions : 180 x 48 x 36,5 mm ( L x B x H )
Weight : ca. 1,5 kg
Protection class : IP68
Cable length (standard) : 15 m
Bending radius : > 10 x D (Kabeldurchmesser 6,25mm) = > 62,5mm
Temperature range : 0°C ... 50°C
Mounting shoe material : V2A 1,5mm

Certificates

EX / ATEX : IBExU 04 ATEX 1256

Measuring principle

Flow velocity: Ultrasonic Doppler :
Filling level: Differential pressure :

Flow velocity

Measuring range : 0,01 - 4 m / s
Measuring accuracy : +/- 5 % vom Momentanwert im Kanal
Temperature drift : 0,1% / °C ( Meßspanne )
Temperature drift : 0,05% / °C ( Nullpunkt )
Output signal : 4 - 20 mA

Filling level

Measuring ranges : 0 –1 m ; 0 – 2 m ; 0 – 4 m
Measuring accuracy : < 0,2% v.E. Summe aus Nichtlinearität, Hysterese und Wiederholbarkeit
Temperature drift : 0,005% / °C v.E. Meßspanne
Temperature drift : 0,005% / °C v.E. Nullpunkt
Material : Al2O3 (96%) aktive Fläche
Output signal : 4 – 20 mA
Zero point : norm 4 mA ( +/- 3 % )

ZMF-20x Serie

Robust gas sensor for industrial applications with extended operating temperature range and wide-ranging approvals

The ZMF-20X series includes sensors & transmitters for measuring gas concentrations of various gases such as CO2, methane, propane and SF-6. This makes the sensors suitable for many applications. The ZMF-20X gas sensors are designed to be extremely rugged & suitable for use in harsh environments.

Properties

Operating conditions : -40 °C…+60 °C
Storage conditions : -40 °C…+85 °C
RelativeHumidity : 0…95 % nicht kondensierend
Measurement method : NDIR (dual beam technology)
Certification : SIL2-Zertifizierung, ATEX-Zertifizierung (auf Anfrage)
Signal output : 4..20mA
Power supply : 12…24 V DC
Housing : Edelstahl
Standard cable length : 1,5 m (weitere Längen auf Anfrage)
pressure conditions : 800...1200 mbar
screw thread : M46x1,5

BK-380

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –25...+70 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm

Material

Housing : Polycarbonat
Mounting clip : V2A, Kabelbinder (PP)
Rivet : V2A
Screw connection : M 20 x 1.5, Polyamid

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 5...250 V AC/DC
Switching current : 1mA...6 A AC/DC
Switching capacity(min.) : 300 VA, 60 W
Switching capacity(max.) : 5 mW

FluidIX Lub-6

Inline-capable oil condition sensor based on a multi-channel infrared measuring cell for permanent monitoring of the oil condition and prevention of machine damage

Based on non-dispersive infrared technology (NDIR), ZILA GmbH has developed an inline-capable measuring system that permanently monitors the oil condition directly in the system. The optical measuring system consists of a multi-channel infrared measuring cell with associated electronics and peripherals.

General information

Housing : Robustes Aluminiumgehäuse
Operating voltage : 18...36V DC (max. 400 mA @18V)
Dimensions : 150 x 119 x 82 mm (L x B x H)

Operating conditions

Operating temperature: : 0...+70 °C (optional 0...+90 °C)
Maximum operating pressure: : 10 bar (optional 30 bar)
Storage temperature: : -40...+90 °C

Connection

ModBus TCP/IP : Ethernet-Port für Kommunikation über herstellerunabhängiges Busprotokoll
Digital I/O ports : 1x Digital In 18...36V (10 mA max.), 4x Digital Out 18...36V (5 mA max.)

Operation

User Interface : grafisch über Weboberfläche im eingebundenen Netzwerk

ELH 24 V

Hanging electrode as leakage probe 24 V DC

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

General data

Protection class : IP 68
Probe body material : PE, PVC, PPH, PVDF
Diameter probe body : 15 mm, 25 mm, 40 mm
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ

Material

Screw connection : PVDF
Cable : TPK ( PVC Basis)
on request : FEP (Teflon), PVC - blau
cable length : auf Wunsch (Standard 3 m)
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Glas-Kohlestifte

ZCS-5000

Self-contained CO2 sensor ZCS-5000 in small housing with warning horn

stand alone CO2 sensor for measuring and monitoring carbon dioxide concentration in ambient air.

Properties

Housing : Kunststoff
Power supply 24V : 24V DC | 230V

Measuring element and parameter

Measuring principle : optisch, NDIR
measuring grid : 2 sec.
Accuracy : ± (50ppm+3% vom Messwert) im Bereich von 300…5.000ppm CO2

Operating conditions

Operating temperature : 0…+50 °C
Storage temperature : -30 °C…+75 °C
Operating humidity : 0…85% rH (nicht kondensierend)
Storage humidity : 0…85% rH (nicht kondensierend)

TK-312

Evaluation unit with 0/4... 20 mA current output

The TK-312 measuring transducer converts the resistance signal supplied from a continuous level sensor into a current signal proportionate to the level.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
nominal voltage : 24... 230 V AC/DC
Power consumption : 2 VA, 2W
Dimensions housing type B : 22,5 x 114,5 x 99
Dimensions housing type C : 22,5 x 114,5 x 114

Input

Voltage : 0...10 V
Resistance in three-wire circuit RG : 0-4...10 kW

Output

Temperature influence tolerance : max. ± 0,6 % der Signalspanne
Current output : 0/4... 20 mA bezogen auf die Masse des Eingangs
Voltage output : 0/2... 10 V
Mounting : Tragschiene nach EN 50022
Weight : 175 g

TK-301

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 05 (06)
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Operating pressure : max. 20 bar
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm| 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 05 : 0,81 g/cm³
Type 06 : 0,67 g/cm³

ÜTA-32

Overfuelling indicator

The top-mounted tank indicator is a mechanically operated, on-the-spot indicator. The liquid level in the tank located below the indicator is determined proportionately to the filling level and is indicated. Control of the level is easily achieved through the installation of switching contacts. The switching points for level control can be steplessly adjusted, on-the-spot and at any time.

Properties

connection : G 1” (andere Gewinde auf Anfrage)
max.length guide tube : siehe Diagramm
Operating temperature : atmosphär. Bedingungen
Operating pressure : atmosphär. Bedingungen
media density : siehe Eintauchtiefe
Number of contacts : beliebig
Contact load : max. 10 VA, max. 230 V AC
Length : max. 1750 mm

Material

Sight tube : PVC transparent
connection : PVC-Verschraubung mit PTFE-Stangenführung
Guide rod : Edelstahl, Titan, Hastelloy B, Hastelloy C oder PVCRohr
float : PE / PP

TPS-410 TPS-420

Compact, analogue dew point sensor

The dew point sensors of the enable direct measurement of the dew point and ambient temperature indoors and outdoors.

Properties TPS-410

Operating voltage : 12...30V DC
Power consumption : < 15mA
Protection class Housing : IP66
Protection class plug : IP67
Weight : 96g

Properties TPS-420

Operating voltage : 24V DC
Loop voltage min: : Bürde(Ohm) *0,02 + 8 V
Loop voltage max: : 30V

General properties

Housing : Aluminium, eloxiert
Dimensions (in mm) : 135 x Ø 19,2

Measuring range

measuring range (dew point) : -50…+80 °C
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V | 4...20mA

NSP-X-E

Vibrating Limit Switch

The vibrating limit switch is a level limit switch for all kinds of fluids and is used in tanks, containers and pipelines.

Properties

Protection class EN60529 : IP 65/IP 67
Operating pressure : ≤ 40 bar
media density : ρ ≥ 0,7 g/cm³
Viscosity : max. 10000 mm²s
Rated current : < 15 mA
Protection class : III
Output : PNP
power : kurzschlussfest, überlastsicher
Display : LED (grün, rot)
Switching delay (cover) : ca. 0,5 s
Switching delay (release) : ca. 1 s

NSP-1-E

connection thread : G 1”
Operating temperature : –40...+150 °C
Storage temperature : –40...+85 °C
nominal voltage : 10...55 V DC (verpolsicher)
Current output : ≤ 350 mA

NSP-2-E

connection thread : G ½”
Operating temperature : –40...+100 °C
Storage temperature : –20...+70 °C
nominal voltage : 10...35 V DC (verpolsicher)
Current output : ≤ 250 mA

T205 PP

Magnetic immersion probes made of PP

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 65
Number of floats : 1x Typ 12 | 1x Typ 13
connection cable : LiYY-Kabel 0,14 mm² | PVC-Litze 0,24 mm²
Operating temperature : max. 60 °C
Operating pressure : drucklos
Number of contacts : 1x Schließer / Öffner
Switching current : 1 A
Switching voltage : 250 V AC
Switching capacity : 50 W/VA

Float type

Type 12 : Zylinder PP 19 mm Ø | Dichte 0,93 g/cm³
Type 13 : Zylinder PP 25 mm Ø | 0,68 g/cm³

BK-390

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –25...+70 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm

Material

Housing : Polycarbonat
Mounting clip : V2A, Kabelbinder (PP)
Rivet : V2A
Screw connection : M 20 x 1.5, Polyamid

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 5...250 V AC/DC
Switching current : 1mA...6 A AC/DC
Switching capacity(min.) : 300 VA, 60 W
Switching capacity(max.) : 5 mW

ER-104

1-channel electrode relay

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
Storage temperature : –30...+80 °C
Weight : ca. 150g
ltdata. :

Power supply

nominal voltage : siehe Typenschlüssel
AC nominal frequency : 48...62 Hz
Power consumption : max. 1 W / VA

Input

Open circuit voltage : ≤ 10 V AC
Short-circuit current : ≤ 5 mA
Switching delay : siehe Typenschlüssel
Sensitivity range : siehe Typenschlüssel

Output

Contacts : potentialfreie Wechselkontakte
Switching voltage(min) : 5 V
Switching voltage (max) : 250 V AC / 150 V DC
Overvoltage category : EN 61010-1 Kategorie III

Switching current

Switching current : min. 5 mA
Switching current : max. cos φ =1 5 A
Switching current : max. cos φ = 0,7 3 A/AC
Switching current : max. cos φ = 1

TK-304

Level transmitter for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class Socket : IP 65
Float type : 03, 04, 09
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar (Kugel) max. 15 bar (Zylinder)
Resolution : 7,5 mm | 10 mm
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 03 : 0,75 g/cm³
Type 04 : 0,65 g/cm³
Type 09 : 0,76 g/cm³

TK-303

Level transmitter for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class : IP 65
Float type : 03, 04, 09
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar (Kugel) max. 15 bar (Zylinder)
Resolution : 7,5 mm | 10 mm
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 03 : 0,75 g/cm³
Type 04 : 0,65 g/cm³
Type 09 : 0,76 g/cm³

LU-180 EX

Compact Ultrasonic Level Sensor

The LU-150 is a short-range integrated ultrasonic level transmitter, intrinsically safe as Ex-version LU-180. This general purpose, 2 wire, 4 to 20 mA loop powered transmitter is ideal for liquids, slurries, and bulk materials in open or closed vessels to 5 m (16.4 ft).

Properties

Protection class EN60529 : IP 68
Power supply : 12...30 V DC / 0.1A Spitze
Power consumption : Max. 0,75 W (25 mA bei 24 V DC)
Output : 4...20 mA
Max. Load : 600 Ω bei 24 V DC
Measuring span : Proportional oder umgekehrt proportional
Measurable materials : Flüssigkeiten, Schlämme, Schuttgüter
operating temperature : –20...+60 °C
Opening angle : 12°
working pressure : Atmosphärisch
Display : 3-stelliges LCD
Process connection : Gewinde G 2" (BSPP) EN 10226 PVDF
Weight : 1,3 Kg
Cable entry : Kabelverschraubung M 20 x 1.5
Material housing electronics : Polybutylenterephthalat PBT
Material sensor / thread : PVDF-Copolymer

Input

Measuring range : 0,25...5,0 m
frequency : 54 kHz

Measuring Accuracy

Measurement deviation : ± 0,25 % vom Messbereich (in Luft)
Resolution : 3 mm
Temperature compensation : im Sensor integriert
Echo processing : „Sonic Intelligence“ von Siemens

TK-309-0

Stainless steel level sensor for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class Socket : IP65
Float type : Typ 07
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar
media density : Typ 07: 0,54 g/cm³
Resolution : 7,5 mm | 10mm |15 mm | 20 mm
Accessories : R/I-Wandler TK-101

TK-301 PTFE

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 16
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 120 °C
Operating pressure : max. 3 bar
media density : 0,79 g/cm³
Resolution (depending on type) : 7,5 mm |10 mm | 15 mm | 20 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

TK-302

Level transducer made of brass and stainless steel

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 03 (04)
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Operating pressure : max. 20 bar
Resolution : 10 mm | 15 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 03 : 0,75 g/cm³
Type 04 : 0,65 g/cm³

W-35X

Water Level Gauge with sight glass indicator

The water level gauge is particulary suitable for all liquid media which are aggressively hot and rapidly moved in a container, but are not too much contamined.

Properties

Tank connection : Flansch ab DN 25 oder Verschraubung ab G ½"
Material Float : PPH max. 2,5 bar, Glas max. 10 bar
cable length : bei monostabilem Kontakt: Standard 2 m
Number of contacts : beliebig
Contact distance : min. 10 mm
Temperature of the fluid : mit Plexiglasrohr max. +70 °C
media density : ρ ≥ 0,95 g/cm³ | ρ ≥ 0,85 g/cm³ (auf Wunsch)

Properties W-350

Material tube sight glass : transparentes PVC
Temperature of the fluid : max. +60 °C
Operating pressure : max. 2,5 bar
Material flange : PVC
Material connection with angle valve : PVC
Material sealing ring : Gummi

Properties W-351

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Rotguss
Material connection with angle valve : Rotguss
Material sealing ring : Silikon
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-352

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4571 als Bogen 90°
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-353

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4401
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

LU-1X0

Compact Ultrasonic Level Sensor

Properties

Protection class EN60529 : IP 68
Power supply : 12...30 V DC / 0.1A Spitze
Power consumption : Max. 0,75 W (25 mA bei 24 V DC)
Output : 4...20 mA
Max. Load : 600 Ω bei 24 V DC
Measuring span : Proportional oder umgekehrt proportional
Measurable materials : Flüssigkeiten, Schlämme, Schuttgüter
operating temperature : –20...+60 °C
Opening angle : 12°
working pressure : Atmosphärisch
Display : 3-stelliges LCD
Process connection : Gewinde G 2" (BSPP) EN 10226 PVDF
Weight : 1,3 Kg
Cable entry : Kabelverschraubung M 20 x 1.5
Material housing electronics : Polybutylenterephthalat PBT
Material sensor / thread : PVDF-Copolymer

Input

Measuring range : 0,25...5,0 m
frequency : 54 kHz

Measuring Accuracy

Measurement deviation : ± 0,25 % vom Messbereich (in Luft)
Resolution : 3 mm
Temperature compensation : im Sensor integriert
Echo processing : „Sonic Intelligence“ von Siemens

ER-214

Electrode Relays

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
Storage temperature : –30...+80 °C
AC nominal frequency : 48...62 Hz
Power consumption : max. 1 W / VA
Weight : ca. 150 g

Input

Open circuit voltage : ≤ 10 V AC
Short-circuit current : ≤ 5 mA

Output

Contacts : 1 potentialfreie Wechselkontakte pro Kanal
Switching voltage : min. 5 V | max. 250 V AC | max. 150 V DC
Switching current : min. 5 mA | max. cosφ=1 3A | max. cosφ=0,7 1 A/AC | max. cosφ=1
Switching capacity : min. 300 mW | max. 750 VA / 150 W (30 V DC / 5 A) / 18 W (150 V DC / 0,12 A)
Working / Idle current : umschaltbar
overvoltage category : EN 61010-1 Kategorie III

ZDS-Serie

Precision pressure switch in robust design and first-class technical features.

Can be used in oil, brake fluid, diesel, air and other gases. With very good stability and overpressure resistance.

Properties ZDS-N

Pressure range (stepped) : 0...500 mbar
supply : 12 - 24 V DC
Output : Relais 230 V/1A
overload : 2 x Messbereich
Med. connection : Schlauch
electrical connection : Schraubklemme
feature : Tasten, LCD-Anz.

Properties ZDS-H

Pressure range (stepped) : 0...2.000 bar
supply : 24 V DC
Output : Relais 60 V AC/1A
overload : 1,5 x Messbereich
Med. connection : G 1/4 Zoll
electrical connection : Schraubklemme
feature : Tasten, LCD-Anz.

T201 PTFE

Immersible Magnetic Probe made of PTFE

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ZMF-203e-IR

Robust sulphur hexafluoride SF6 sensor for industrial applications with extended operating temperature range and wide-ranging approvals

The ZMF-203e-IR is an SF6 sensor for measuring sulphur hexafluoride concentration in harsh environments.

Properties

Operating conditions : -40 °C…+60 °C
Storage conditions : -40 °C…+85 °C
RelativeHumidity : 0…95 % nicht kondensierend
Measurement method : NDIR (dual beam technology)
Certification : SIL2, ATEX
Signal output : 4..20mA
Power supply : 12…24 V DC
Housing : Edelstahl
Standard cable length : 1,5 m
pressure conditions : 800...1200 mbar
screw thread : M46x15

Measuring ranges

in ppm : in vol%
0...1.000ppm : 0...0,1 vol%
0...2.000ppm : 0...0,2 vol%

Options

Other cable lengths on request :
ATEX certification (optional) :

T209

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ZMF-200e-IR

Robust gas sensor for industrial applications with extended operating temperature range and wide-ranging approvals

Properties

Operating conditions : -40 °C…+60 °C
Storage conditions : -40 °C…+85 °C
RelativeHumidity : 0…95 % nicht kondensierend
Measurement method : NDIR (dual beam technology)
Signal output : 4..20mA
Power supply : 12…24 V DC
Housing : Edelstahl
Standard cable length : 1,5 m
Certification : SIL2, ATEX (optional)
pressure conditions : 800...1200 mbar
screw thread : M46x1,5

Measuring ranges

in ppm : in vol%
0…2.000ppm : 0…0,2 % vol
0…5.000ppm : 0…0,5 % vol
0…10.000ppm : 0…1 % vol
0…20.000ppm : 0…2 % vol
0…50.000ppm : 0…5 % vol
0…200.000ppm : 0…20 % vol
0…1.000.000ppm : 0…100 % vol

Measuring Accuracy

below 25% of the range : ±1 % FS
below 50% of the range : 2 % FS
above 50% of the range : ±5 % FS

T205-0.F

Ex area zone 0 (category 1)

Properties

Protection class EN60529 cable : IP 68
connection cable : max. 10 Meter PUR
Sliding tube length : Max. 6000 mm
Operating temperature : max. 120 °C
F-Contact : 1 / 12 kΩ

Float

Stainless steel ball 44 mm Ø : max. 15 bar | 0,60 g/cm³
Stainless steel cylinder 27 mm Ø : max. 10 bar | 0,78 g/cm³

NP-256

Level Switch - multiple 2...4 - pneumatic (hose)

very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated

Properties

Protection class EN60529 : IP 54
connection thread : ab G2”
Union nut : ab G2¾”
Container connection flange : ab DN 25
HoseØ : 13x2 mm
Operating temperature : +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching capacity : 500 VA
Switch-on point (Viton membrane) : 150 mm WS ±30 mm
Switch-off point (MembraneViton) : 90 mm WS ±30 mm

Material

Hose : PVC
Screw fitting/grommet : PVC
flange : PVC
Connection head : PVC

Switching voltage

silver : max. 250 V AC
Gold : max. 24 V AC

Switching current

silver : max. 6 A
Gold : max. 100 mA

EF2 24...230 V

Conductive electrodes with 24...230 V direct connection

The EF2 overfill protection (24...230 V AC/DC) is approved by "DIBt" as an overfill protection for liquids hazardous to water.

Properties

connection : Polyesterdose (PO)
Protection class : IP 65
connection thread : G1"
Union nut : auf Wunsch

Material

Screw connection : PE, PVC, PPH, PTFE
Sensor rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal
Operating pressure : atmosphärisch
Resistance value of line monitoring : 100 kΩ
Sensitivity range : einstellbar 2…100 kΩ

Operating temperature

PE : atmosphärisch
PVC : atmosphärisch
PPH : 90 °C
PTFE : 100 °C

Power supply

nominal voltage : 24…230 V AC/DC
Power consumption : < 2 W

Output

Output contact : 2 potentialfreie Wechselkontakte
Switching voltage : max. 250 V AC /30 V DC
Switching current : max. 5 A AC / 5 A DC
Switching capacity : max. 750 VA / 90 W
displays : Betriebs-LED Grün, Funktions-LED Rot
Switching delay : ca. 0,5 s Anzug / Abfall
CE marking : siehe Konformitätserklärung

T-20x.F 230V

Overfill protection for containers

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection