Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

10 article(s) in your cart
pos.	image	product	Configure	Actions
1		TK-302
2		QFS-40
3		CSC-20 YUGO
4		TK-313
5		TK-101 EX
6		ER-104
7		LGW-13
8		NSP-X-E
9		SG2420
10		T-20X

TK-302 configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführungen

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

QFS-40 configure

1 Anschluss

2 Gehäusematerial

3 Kabelmaterial

4 Kabellänge

Amount

additional infomation

TK-313 configure

1 Gehäuse

2 Eingang

Amount

additional infomation

TK-101 EX configure

1 ATEX

Amount

additional infomation

NSP-X-E configure

1 Messbereiche

2 Gabeloberfläche

Amount

additional infomation

TK-302

Level transducer made of brass and stainless steel

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 03 (04)
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Operating pressure : max. 20 bar
Resolution : 10 mm | 15 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 03 : 0,75 g/cm³
Type 04 : 0,65 g/cm³

QFS-40

Built-in float level switch

The QFS-40 built-in float switch is designed for low-cost monitoring of liquids in containers.

Technical Data

Switch housing : PPH| PVDF
Seal : NBR (PPH) | FPM (PVDF)
Operating temperature : PPH max. 80 °C| PVDF max. 100 °C
Operating pressure : max. 10 bar
Mounting position : horizontal (±30° von der Horizontalen)
Contact assembly : Schliesser-, Öffnerkontakt (je nach Einbau)
Electrical connection : PVC-Kabel
Switching capacity : max. 230 V AC/DC| max. 40 VA, max. 2 A
Contact resistance : max. 80 mW
Min. electric strength : 400 V DC / 1 s
Inductive/capacitive loads : Unbedingt Kontaktschutz vorsehen
fluid density : PPH > 0,6 kg/dm³ | PVDF > 0,95 kg/dm³
Protection class : IP 68

Connections

external installation : G ½"
internal installation : M16

CSC-20 YUGO

Decentralised control unit, equipped with a CO2 sensor for needs-based ventilation

Decentralised CO2 monitoring with direct control of various supply and exhaust air elements such as fans and dampers (0..10.000 ppm)

Properties

Power supply : 230 V AC
measuring range (CO2) : 0..10.000 ppm
Measuring accuracy CO2 : ± 50ppm +3 % vom Messwert
Operating conditions : 0…50°C / 0…85 %rH
Storage conditions : -30…70°C / 0…85 %rH
Protection class : IP 31
EMV/ESD : EN 50082-1, EN 50082-2
Signal output : I²C

TK-313

Evaluation unit with 2 change over limit contacts

The TK-313 limit comparator can be used in conjunction with our TK-30... continuous level sensors with 0(4)...20 mA or 0...10 V output signal for level control / measurement.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
nominal voltage : 24... 230 V AC/DC
Power consumption : 2 VA
Dimensions housing type B : 22,5 x 114,5 x 99
Dimensions housing type C : 22,5 x 114,5 x 114

Input

power : 0/4...20 mA
Voltage : 0...10 V
Resistance in three-wire circuit RG : 0–4...10 kΩ

Output

Output contacts : 2 Wechselkontakte
Switching voltage : max. 250 V AC
Switching current : max. 3 A
Switching capacity : max. 500 VA
Temperature influence tolerance : max. ± 0,6 % der Signalspanne
Mounting : Tragschiene nach EN 50022
Current output : 4...20 mA bezogen auf die Masse des Eingangs
Display (%) : 2-stellig, 7-Segment
Weight : 175 g
ltdata. :

TK-101 EX

Measuring transducer (R/I-transducer)

The measuring transducer Tk101 and Tk101Ex are built directly into the connection boxes of our Liquid Level Measuring Instruments of type TK-30.

Properties

Operating temperature : -20...+60 °C
Storage temperature : -40...+80 °C
Ex-protection : siehe Zertifikat
CE marking : siehe Konformitätserklärung

Input

Resistance range in three-wire circuit : 4...10 kΩ
Measuring current : 0,8 mA @ RE = 4 kΩ
Measuring current : 0,33 mA bei RE = 10 kΩ
Measuring voltage : 3,3 V

Supply/Output

2-wire : 4...20 mA
Voltage(Um) : 11...28 V DC
Burden / load : 0...800 Ω |RBürde max = [(Um - Um min) / 0,02] Ω
Output signal in case of error : max. 24 mA

Fault influences

Max. Total error : ± 1 %
Temperature influence : -0,015 % / °C
Supply voltage influence : 0,025 % / V

Setting range

Full deflection : 60...105 %
Zero point adjustment : 0...25 %

ER-104

1-channel electrode relay

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
Storage temperature : –30...+80 °C
Weight : ca. 150g
ltdata. :

Power supply

nominal voltage : siehe Typenschlüssel
AC nominal frequency : 48...62 Hz
Power consumption : max. 1 W / VA

Input

Open circuit voltage : ≤ 10 V AC
Short-circuit current : ≤ 5 mA
Switching delay : siehe Typenschlüssel
Sensitivity range : siehe Typenschlüssel

Output

Contacts : potentialfreie Wechselkontakte
Switching voltage(min) : 5 V
Switching voltage (max) : 250 V AC / 150 V DC
Overvoltage category : EN 61010-1 Kategorie III

Switching current

Switching current : min. 5 mA
Switching current : max. cos φ =1 5 A
Switching current : max. cos φ = 0,7 3 A/AC
Switching current : max. cos φ = 1

LGW-13

CO2 sensor for measuring room air quality with visual and acoustic warning signal output

Multifunctional CO2 sensor with LED display and acoustic alarm, equipped with switching functions for both industrial and private applications (0...3.000ppm)

Product features

Product type : CO2-Sensor zur Bewertung und Überwachung der Luftgüte
Measuring principle : Basierend auf optischem Messprinzip (NDIR)
Measuring range : Lieferbar in unterschiedlichen Messbereichen (Standard 0…3.000ppm)
Display : Darstellung der CO2-Konzentration mittels Bargraphanzeige (Luftgüteampel)
Switching output : Einstellbarer potentialfreier Schaltausgang
Signal output : 4...20 mA und 0...10 V Signalausgang (nur bei der Variante L)
Alarm : Akustischer Alarmmelder (je nach eingestellten CO2-Grenzwerten)
further function : Integrierte Funktionsüberwachung
Housing : Kompaktes IP 20 Wandgehäuse (Polycarbonat, weiß)
Extension : Mögliche Erweiterung um Temperaturmessung
Assembly : Erhältlich als Tischgerät mit Netzteil oder zur Wand- & Aufputzmontage ohne Netzteil

Technical specifications

Standard measuring range: : 0…3.000ppm
Optional measuring ranges: : 0…1% vol, 0…3% vol (weitere auf Anfrage)
Accuracy : +-3% vom Messbereich (30 ppm bei 3.000 ppm)
Relay output: : Potentialfrei
Response time : ca. 20 s
Operating voltage : 24 V DC, 150 mA

NSP-X-E

Vibrating Limit Switch

The vibrating limit switch is a level limit switch for all kinds of fluids and is used in tanks, containers and pipelines.

Properties

Protection class EN60529 : IP 65/IP 67
Operating pressure : ≤ 40 bar
media density : ρ ≥ 0,7 g/cm³
Viscosity : max. 10000 mm²s
Rated current : < 15 mA
Protection class : III
Output : PNP
power : kurzschlussfest, überlastsicher
Display : LED (grün, rot)
Switching delay (cover) : ca. 0,5 s
Switching delay (release) : ca. 1 s

NSP-1-E

connection thread : G 1”
Operating temperature : –40...+150 °C
Storage temperature : –40...+85 °C
nominal voltage : 10...55 V DC (verpolsicher)
Current output : ≤ 350 mA

NSP-2-E

connection thread : G ½”
Operating temperature : –40...+100 °C
Storage temperature : –20...+70 °C
nominal voltage : 10...35 V DC (verpolsicher)
Current output : ≤ 250 mA

SG2420

Supply unit SG2420 for flow sensor

The DSM-2420 sensor can only be operated in hazardous areas with the associated SG2420 power supply unit or appropriately designed, approved Zener barriers.

Properties

Housing : Kunststoff
Protection class : IP00
Ambient temperature : -20…+60°C
Supply voltage : 24V DC +20% / -10%

T-20X

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil