Home
Cart

Cart

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

5 article(s) in your cart
pos.	image	product	Configure	Actions
1		KS-410 KS-420
2		QFS-40
3		W-35X
4		SG2420
5		ZCS-5000

QFS-40 configure

1 Anschluss

2 Gehäusematerial

3 Kabelmaterial

4 Kabellänge

Amount

additional infomation

W-35X configure

1 Anschlussmaterial

2 Rohrmaterial

3 Flanschgröße

4 Mittenentfernung

Amount

additional infomation

KS-410 KS-420

Sensors for temperature & humidity measurement in aluminium or polycarbonate housing

The KS series sensors are modular temperature and humidity measurement sensors in compact housings for use in almost any application.

Specifications

Housing shapes : Stabform | Alu- oder Polycarbonatgehäuse
measurands : Temperatur | relative Feuchte
Measuring range : -40...+80 °C | 0...100% rH
Signal output : 0...10 V oder 4…20 mA
Power supply : 12...30 V DC | 24 V DC

properties KG-410

Operating voltage : 12...30V DC
Power consumption : < 15mA

properties KG-420

Operating voltage : 24V DC
Loop voltage min: : Bürde(Ohm) *0,02 + 8 V
Loop voltage max: : 30V

General properties

Housing : Alu-Gehäuse mit Edelstahlstab oder Polycarbonat
Dimensions (LxBxH in mm) : 30 x 45,4 x 97,3
Protection type/class : Gehäuse IP66, Stecker IP 67
Weight : 96g

Measuring range

measuring range (Humidity) : 0…10% rH
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V | 4...20mA

QFS-40

Built-in float level switch

The QFS-40 built-in float switch is designed for low-cost monitoring of liquids in containers.

Technical Data

Switch housing : PPH| PVDF
Seal : NBR (PPH) | FPM (PVDF)
Operating temperature : PPH max. 80 °C| PVDF max. 100 °C
Operating pressure : max. 10 bar
Mounting position : horizontal (±30° von der Horizontalen)
Contact assembly : Schliesser-, Öffnerkontakt (je nach Einbau)
Electrical connection : PVC-Kabel
Switching capacity : max. 230 V AC/DC| max. 40 VA, max. 2 A
Contact resistance : max. 80 mW
Min. electric strength : 400 V DC / 1 s
Inductive/capacitive loads : Unbedingt Kontaktschutz vorsehen
fluid density : PPH > 0,6 kg/dm³ | PVDF > 0,95 kg/dm³
Protection class : IP 68

Connections

external installation : G ½"
internal installation : M16

W-35X

Water Level Gauge with sight glass indicator

The water level gauge is particulary suitable for all liquid media which are aggressively hot and rapidly moved in a container, but are not too much contamined.

Properties

Tank connection : Flansch ab DN 25 oder Verschraubung ab G ½"
Material Float : PPH max. 2,5 bar, Glas max. 10 bar
cable length : bei monostabilem Kontakt: Standard 2 m
Number of contacts : beliebig
Contact distance : min. 10 mm
Temperature of the fluid : mit Plexiglasrohr max. +70 °C
media density : ρ ≥ 0,95 g/cm³ | ρ ≥ 0,85 g/cm³ (auf Wunsch)

Properties W-350

Material tube sight glass : transparentes PVC
Temperature of the fluid : max. +60 °C
Operating pressure : max. 2,5 bar
Material flange : PVC
Material connection with angle valve : PVC
Material sealing ring : Gummi

Properties W-351

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Rotguss
Material connection with angle valve : Rotguss
Material sealing ring : Silikon
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-352

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4571 als Bogen 90°
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

Properties W-353

Material tube sight glass : Hartglas, Plexiglas
Temperature of the fluid : max. +120 °C
Material flange : Edelstahl
Material connection with angle valve : Edelstahl 1.4401
Material sealing ring : PTFE und Viton
Operating pressure with glass tube : max. 10 bar
Operating pressure with plexiglass tube : max. 2 bar

SG2420

Supply unit SG2420 for flow sensor

The DSM-2420 sensor can only be operated in hazardous areas with the associated SG2420 power supply unit or appropriately designed, approved Zener barriers.

Properties