Description
The hydrostatic submersion probes are used for filling level measurements in water and in clean to slightly contaminated liquids as well as in acids, alkaline solutions or aggressive media.
Données techniques
Propriétés
- Classe de protection EN60529
- IP68
- Marquage CE
- siehe Konformitätserklärung
- Température de fonctionnement
- -10...70 °C (PVC: -10...60 °C)
- Température de stockage
- -25...70 °C (PVC: -10...60 °C)
- Alimentation électrique
- 15...30 V DC
- Puissance
- max. 25 mA
- Sortie
- 2-Leiter-Technik
- Plage de mesure
- 0,8...10 mWs (Standard)
- Surpression
- abhängig vom Messbereich
- Écart par rapport à la courbe caractéristique
- Nichtlinearität, Hysterese, Reproduzierbarkeit nach IEC 60770 Standard: ≤± 2%
- Résistance de l'isolation
- > 100 kΩ
- Résistance aux courts-circuits
- permanent
- Protection contre l'inversion de polarité
- keine Schädigung o. Funktion bei vertauschten Anschlüssen
Matériaux
- Le logement
- Edelstahl 1.4571, PVC, PVDF
- Measuring cell
- Edelstahl 1.4404, Keramik Al2o3 96%, Keramik Al2o3 99,9%
- Joints
- FKM (Viton ®), EPDM, FFKM (Kalrez ®)
- Câble
- PVC (Ø 5,8 mm), PUR (Ø 5,9 mm) oder FEP (Ø 5,3 mm); 2 x 0,14 mm2 mit Luftschlauch und PTFE-Filter
HD-10X configuration
Votre configuration
- Nom de la base
- HD10
- Gehäuse
- Messbereich
- Ausgangssignal
- Kabelart
- Kabellänge
- Abdichtung
- Sondermesszelle
Autres informations sur les produits
Areas of application: environmental engineering, water treatment, sewage plants, depth measurements in wells, open bodies of water, ground water level measurements as well as filling level measurements in open or pressure less tanks.
The housings are made of stainless steel 1.4571, PVC or PVDF. The sensor membranes are made of stainless steel 1.4404, ceramics Alo 96%, Alo 99,9%, the 2323 seals are made of FKM (Viton ®) as standard version.
Other sealing materials are EPDM or FFKM (Kalrez ®). PVC cables are provided by default as connections. Depending on the media resistance, you can also order FEP (Teflon ®) or PUR cables. Approval for use in Ex areas is being prepared.
