Home
Cart

Cart

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

4 article(s) in your cart
pos.	image	product	Configure	Actions
1		Fluidix Lub-VDT
2		XR Relais
3		T200.F
4		T207

Fluidix Lub-VDT configure

1 Signalausgang

2 Messbereich

Amount

additional infomation

Fluidix Lub-VDT

Oil condition sensor for permanent monitoring of mechanical properties of liquids

The FluidIX Lub-VDT enables inline monitoring of mechanical fluid properties.

Properties

CE marking : EN 61000-6-1/2/3/4
Operating voltage : 9...32 V DC
Housing material : Edelstahl
Protection class : IP 67
Dimensions : 30x90 mm
Process connection : G 3/8"
Electrical connection : M12-8 A-Coding
Weight : 150g
Measurement output : 2x 4...20mA
bus protocol : ModbusRTU, CANopen

Measured variables

Resonator frequency : 20...25 kHz
Viscosity : 1-650 cSt (mm²/s)
density : 0.5-1.5 g/cm³
Temperature : -40...+125°C
sampling rate : 1/s

Operating conditions

Temperature of the fluid : -40...+125°C
Housing temperature : -40...+100°C
oil pressure : Max. 50 bar
particle size : 250 μm

XR Relais

Electrode relays and contact protection relays

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised. The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Quiescent current : umschaltbar
Weight : ca. 250 g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

T200.F

Overfill protection for containers

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection

ltdata.Polyesterdose :
ltdata.Aluminiumdose :
ltdata.Polyethylenanschlusskopf :
Cable :
Plug :

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating pressure : Max. 20 bar
media density : ρ ≥ 0,6 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm
Operating temperature : atmosphärisch
ltdata.BetriebstemperaturPP : max. 90°C

Resistance value

Operational readiness : ca. 1 kΩ
overfill alarm : ca. 12 kΩ
Switching time : ca. 20 ms
ltdata. :

T207

Magnetic immersion probes made of PPH

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil