Home
Cart

Cart

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

5 article(s) in your cart
pos.	image	product	Configure	Actions
1		ViscoScope® VA-300
2		TK-312
3		VS-D250
4		MKL
5		T200

ViscoScope® VA-300 configure

1 Viscosity

2 Temperature

3 Process-Connection

4 Material

5 Non-active-Extension

6 Ex-Bereich

Amount

additional infomation

TK-312 configure

1 Housing

Amount

additional infomation

VS-D250 configure

1 Ausgänge

2 Spannungsversorgung

3 Gehäuse

Amount

additional infomation

MKL configure

1 Material

2 Anschlussflansch

3 Prozessanschluss

4 Schwimmer

5 Ablassschraube

6 Anzeige

7 Mittenentfernung

Amount

additional infomation

ViscoScope® VA-300

Maintenance-free inline process viscometer for real-time viscosity measurement

The ViscoScope® sensors are made of high-quality, first-class stainless steel and impress with their intelligent, robust design.

Properties

Protection class : IP65
Material : 1.4571 / 1.4404 (316Ti / 316L)
Process temperature : -40°C … +450°C
Process pressure : Vakuum ... 450 bar
Process connections : DIN Flansch | ANSI Flansch | NPT | Varivent® | Tri-Clamp
Cable length sensor - transmitter : max. 1.000m
max. flow velocity : 10 m / sec
Ex approval : (optional) II 1/2G Ex ia IIC T6...T3 Ga/Gb
Material (optional) : Hastelloy C22, Duplex 2205, Teflon

Sensor types

big cylinder : VA-300L
small cylinder : VA-300M
Sphere : VA-300H
small sphere : VA-300X

Measuring range

VA-300L : 0,1 - 2.500 mPa·s x g/cm³
VA-300M : 1 - 25.000 mPa·s x g/cm³
VA-300H : 0,01...250 Pa·s x g/cm³
VA-300X : 0,1...2.500 Pa·s x g/cm³

Probe dimensions

VA-300L : Ø 32 x 190 mm
VA-300M : Ø 32 x 165 mm
VA-300H : Ø 32 x 130 mm
VA-300X : Ø 19 x 115 mm

TK-312

Evaluation unit with 0/4... 20 mA current output

The TK-312 measuring transducer converts the resistance signal supplied from a continuous level sensor into a current signal proportionate to the level.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
nominal voltage : 24... 230 V AC/DC
Power consumption : 2 VA, 2W
Dimensions housing type B : 22,5 x 114,5 x 99
Dimensions housing type C : 22,5 x 114,5 x 114

Input

Voltage : 0...10 V
Resistance in three-wire circuit RG : 0-4...10 kW

Output

Temperature influence tolerance : max. ± 0,6 % der Signalspanne
Current output : 0/4... 20 mA bezogen auf die Masse des Eingangs
Voltage output : 0/2... 10 V
Mounting : Tragschiene nach EN 50022
Weight : 175 g

VS-D250

Transmitter for ViscoScope viscosity sensors

Maximum flexibility for an optimal choice of measuring instrument: The VS-D250 transmitter is compatible with all ViscoScope® sensors of the types VA-100 and VA-300.

Properties

Output card socket : 2
External input : 0/4…20 mA | 0/2…10 V DC
Power supply : 24V DC, 12 W
Dimensions : 142 x 106 x 73 mm (L x B x H)
Front : RS232, MODBUS RTU (Standard)

Display and Operation

Lines : 4
Pages : 2
Character set : alphanumerisch
Buttons : 3 (front)

Alarms

system function :
sensor diagnosis :
Coil Temperature :
2 configurable LEDs :

optional outputs

0/4…20mA | 0/2…10V DC (active) :
RS232 | RS485 :
2 SPDT-Relays: RS232 | RS485 :

Filter

Moving average (200 measured values) :

MKL

Magnetic Flap Indicator

The MKL level indicator is connected by its two connections to the container to be monitored (see connection example). According to the law of interconnected containers the level in the float chamber corresponds exactly to the level in the container

Properties

connection : Flansch ab DN 15
Material : rostfreier Edelstahl, PVC, PPH, PVDF
Material flange : Edelstahl 1.4571, C22.8
Material Float : Edelstahl, Titan, PVC, PPH, PVDF
Number of contacts : beliebig
Contact load : max 10 VA, max 230 V AC
Display length : max. 6m

Operating temperature

PTFE seal : max. 150 °C
Stainless steel: Klingerit seal : max. 200 °C
PVC : max. 60 °C
PPH : max. 90 °C
PVDF : max. 130 °C

Stainless steel float

Weight : ~ 300 g
Dimensions : Ø 52 x 270
Operating pressure : 16 bar
media density : ρ ≥ 0,70 g/cm³

Stainless steel float

Weight : ~ 320 g
Dimensions : Ø 52 x 270
Operating pressure : 40 bar
media density : ρ ≥ 0,75 g/cm³

Titanium float

Weight : ~ 180 g
Dimensions : Ø 52 x 150
Operating pressure : 16 / 40 bar
media density : ρ ≥ 0,73 g/cm³

PVC float

Weight : ~ 331 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,8 g/cm³

PPH float

Weight : ~ 283 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,69 g/cm³

PVDF float

Weight : ~ 352 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,85 g/cm³

T200

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil