Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

61 article(s) in your cart
pos.	image	product	Configure	Actions
1		KST-20 Vento
2		ELH 230 V
3		LU-180 EX
4		TK-304
5		T207
6		SG2420
7		T204-0
8		ZS-2
9		EF 3…5 24 V
10		ZT-V
11		TK-313
12		Smart Pressostat App
13		ZT-S
14		TK-309-0
15		LU-150
16		HD-110 \| HD-112 \| HD-114
17		ER-107
18		DTS-CAN
19		MKL
20		GSB-390
21		XR Relais
22		T205 VA
23		ER-Serie
24		TK-32X
25		QFS-55
26		TK-309
27		T200.F-24V
28		EFV2 24V
29		QFS-3X
30		ZMF-200e-IR
31		T-20X
32		KST-20 Vento-RN
33		T200 Ex
34		ESE
35		CS-11
36		XR-4x0 \| XR-4x1
37		CSC-20 YUGO
38		TK-302
39		OAA-300
40		XR-6x0 \| XR-6x1
41		TK-301 PTFE
42		T20x.F
43		TK-307-0
44		EE-2X
45		HD-1XX
46		Lub-VDT USB-Kit
47		T-200.L Ex
48		NP-25X
49		ZCS-5000
50		T206
51		ViscoScope® VA-100
52		ELH
53		ES-22
54		T200
55		NSP-X-E
56		TK-312
57		T203.F
58		ZDS-N
59		T205-0
60		T209-0
61		T203

KST-20 Vento configure

1 Innensensor

2 Außensensor

Amount

additional infomation

ELH 230 V configure

1 Stabmaterial

2 Anschluss

3 Kabellänge

4 Kabelbruchwiderstand

5 Sondenkörper-Durchmesser

6 Anschlussgewinde

7 Sondenkörper-Material

8 Kabelmaterial

9 Auswerteelektronik

Amount

additional infomation

LU-180 EX configure

1 Typ

Amount

additional infomation

TK-304 configure

1 Gewinde

2 Schwimmerausführung

3 Anschluss

4 Rohrlänge

5 Auflösung

6 Zubehör

Amount

additional infomation

ZS-2 configure

1 Signalausgang

2 Druckmessbereich

3 Prozessanschluss

Amount

additional infomation

EF 3…5 24 V configure

1 Sicherheitsfunktion

2 Elektrodenanzahl

3 Anschlussgewinde

4 Stabmaterial

5 Stabdurchmesser

6 Beschichtung

7 Auswerteelektronik

8 Stablänge

9 SIL

Amount

additional infomation

ZT-V configure

1 Measuring range

2 Output signal

3 Connection

4 Process connection

Amount

additional infomation

TK-313 configure

1 Gehäuse

2 Eingang

Amount

additional infomation

ZT-S configure

1 Measuring End Range

2 Output signal

3 Connection

4 Process connection

Amount

additional infomation

TK-309-0 configure

1 Gewinde

2 Schwimmerausführung

3 Anschluss

4 Rohrlänge

5 Auflösung

6 Explosionsschutz

7 Zubehör

Amount

additional infomation

LU-150 configure

1 Typ

Amount

additional infomation

HD-110 | HD-112 | HD-114 configure

1 Gehäuse

2 Anschlussgewinde

3 Messbereich

4 Ausgangssignal

5 Steckverbindung

6 Abdichtung

7 Sondermesszelle

Amount

additional infomation

MKL configure

1 Material

2 Anschlussflansch

3 Prozessanschluss

4 Schwimmer

5 Ablassschraube

6 Anzeige

7 Mittenentfernung

Amount

additional infomation

GSB-390 configure

1 Mediumsdichte

Amount

additional infomation

TK-32X configure

1 Ausführung

2 Leuchtdiode

Amount

additional infomation

QFS-55 configure

1 Ausführung

2 Kontakt

3 Schaltkontakt

4 Kabelmaterial

5 Kabellänge

6 Ex-Option

Amount

additional infomation

TK-309 configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

T200.F-24V configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schwimmermaterial

7 Anschluss-Elektronikteil

Amount

additional infomation

EFV2 24V configure

1 Sicherheitsfunktion

2 Verstellbar

3 Elektrodenanzahl

4 Verschraubungsmaterial

5 Stabmaterial

6 Anschluss

7 Anschlussgewinde

8 Kabelbruchwiderstand

9 Auswerteelektronik

10 Standaufnehmerlänge

11 SIL

Amount

additional infomation

QFS-3X configure

1 Schwimmertyp

2 Kontakt

3 Schaltkontakt

4 Hysterese

5 Kabelmaterial

6 Kabellänge

7 EX

Amount

additional infomation

ZMF-200e-IR configure

1 Typ

2 Temperaturbereich

3 Messmethode

4 Signalausgang

5 Messbereich

6 Ex-Zulassung

Amount

additional infomation

ESE configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

additional infomation

XR-4x0 | XR-4x1 configure

1 Kanalanzahl

2 Option

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Empfindlichkeitsbereich

7 Versorgungsspannung

8 Busanschluss

9 SIL

10 Ex

Amount

additional infomation

TK-302 configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführungen

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

OAA-300 configure

1 Ausführung

2 Versorgungsspannung

3 Signalgeber

Amount

additional infomation

XR-6x0 | XR-6x1 configure

1 Kanalanzahl

2 Option

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Versorgungsspannung

7 Busanschluss

8 SIL

9 ATEX

Amount

additional infomation

TK-301 PTFE configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführungen

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

T20x.F configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schaltkontakte

7 Schwimmermaterial

8 Anschlussdose

9 Länge

Amount

additional infomation

TK-307-0 configure

1 Anschluss

2 Rohrlänge

3 Auflösung

4 Explosionsschutz

5 Zubehör

Amount

additional infomation

EE-2X configure

1 Typ

2 Elektrodenanzahl

3 Anschlussgewinde

4 Stabmaterial

5 Stabdurchmesser

6 Beschichtung

7 Stablänge

8 SIL2

Amount

additional infomation

T-200.L Ex configure

1 Länge

2 Anschluss

3 Anschlussgewinde

4 Schwimmertyp

5 Ex

Amount

additional infomation

NP-25X configure

1 Staurohrmaterial

2 Anschlussgewinde

3 Druckschaltermembran

4 Kontakt

5 Staurohrlänge

Amount

additional infomation

ViscoScope® VA-100 configure

1 Viscosity

2 Temperature

3 Process-Connection

4 Material

5 Ex-Area

Amount

additional infomation

ES-22 configure

1 Measurend

2 Safetyfunction

3 Direction

4 measuring-range

Amount

additional infomation

NSP-X-E configure

1 Messbereiche

2 Gabeloberfläche

Amount

additional infomation

TK-312 configure

1 Housing

Amount

additional infomation

T203 configure

1 Material Rohr + Verschraubung

2 Anschlussgewinde

3 Ausführung

4 Anzahl Schwimmer

5 Schwimmertyp

6 Anschlussdose

7 Kontaktart (monostabil)

8 Explosionsschutz

Amount

additional infomation

KST-20 Vento

Automatic, controlled ventilation and dehumidification as well as cooling of rooms with aH-Controlled technology*.

The KST-20 Vento is a climate control unit with aH-Controlled technology for ventilation, dehumidification and cooling for all types of private, commercial and industrial rooms. With the three operating modes for ventilation, dehumidification and cooling, the KST-20 Vento climate control can be used flexibly in almost all living, working and industrial areas.

Properties

Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 160 x 90 x 50 mm
Housing : hochwertiges ASA+PC (UL 94 V-0) für harte Beanspruchung, flammwidrig und selbstverlöschend
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100% rF,
Measuring accuracy (humidity) : ±2%
measuring range (Temperature) : -40…+80°C
Measuring accuracy (temperature) : ±0,2°C

ELH 230 V

Hanging electrode as leakage probe 24...230 V AC/DC

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

General data

Protection class : IP 68
Probe body material : PE, PVC, PPH, PVDF
Diameter probe body : 15 mm, 25 mm, 40 mm
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ

Material

Screw connection : PVDF
Cable : TPK ( PVC Basis)
on request : FEP (Teflon), PVC - blau
cable length : auf Wunsch (Standard 3 m)
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Glas-Kohlestifte

LU-180 EX

Compact Ultrasonic Level Sensor

The LU-150 is a short-range integrated ultrasonic level transmitter, intrinsically safe as Ex-version LU-180. This general purpose, 2 wire, 4 to 20 mA loop powered transmitter is ideal for liquids, slurries, and bulk materials in open or closed vessels to 5 m (16.4 ft).

Properties

Protection class EN60529 : IP 68
Power supply : 12...30 V DC / 0.1A Spitze
Power consumption : Max. 0,75 W (25 mA bei 24 V DC)
Output : 4...20 mA
Max. Load : 600 Ω bei 24 V DC
Measuring span : Proportional oder umgekehrt proportional
Measurable materials : Flüssigkeiten, Schlämme, Schuttgüter
operating temperature : –20...+60 °C
Opening angle : 12°
working pressure : Atmosphärisch
Display : 3-stelliges LCD
Process connection : Gewinde G 2" (BSPP) EN 10226 PVDF
Weight : 1,3 Kg
Cable entry : Kabelverschraubung M 20 x 1.5
Material housing electronics : Polybutylenterephthalat PBT
Material sensor / thread : PVDF-Copolymer

Input

Measuring range : 0,25...5,0 m
frequency : 54 kHz

Measuring Accuracy

Measurement deviation : ± 0,25 % vom Messbereich (in Luft)
Resolution : 3 mm
Temperature compensation : im Sensor integriert
Echo processing : „Sonic Intelligence“ von Siemens

TK-304

Level transmitter for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class Socket : IP 65
Float type : 03, 04, 09
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar (Kugel) max. 15 bar (Zylinder)
Resolution : 7,5 mm | 10 mm
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 03 : 0,75 g/cm³
Type 04 : 0,65 g/cm³
Type 09 : 0,76 g/cm³

T207

Magnetic immersion probes made of PPH

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

SG2420

Supply unit SG2420 for flow sensor

The DSM-2420 sensor can only be operated in hazardous areas with the associated SG2420 power supply unit or appropriately designed, approved Zener barriers.

Properties

Housing : Kunststoff
Protection class : IP00
Ambient temperature : -20…+60°C
Supply voltage : 24V DC +20% / -10%

T204-0

Magnetic immersion probe made of stainless steel (1.4571) as a cable tail variant

For use with highly aggressive liquid media to detect level limit values in containers. Suitable for use in hazardous areas, zone 0 (category 1).

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ZS-2

Differential pressure sensor for low pressure

Compact and robust differential pressure transmitter for measurement on air and other non-aggressive media

Properties

Pressure type : Differenzdruck
Housing : Aluminium
medium : Luft und nicht aggressive Gase

Measurement parameters

response time : < 2,5 s
Hysteresis : 0,1 %
Overload capacity : 4* fach bis 500 mbar, darüber 2* fach
Signal output selection : 0...10 V | 4...20 mA, 2-Leiter

Operating conditions

Operating voltage : 24 VDC/AC ±10 % (0...10 V) | 15...30 VDC (4...20 mA)
Operating temperature : -20...+50 °C

Connections

Electrical connection : Schraubklemme im Gehäuse
Process connection : Schlauchanschluss 4 mm oder 6 mm
Cable gland : PG 7

Pressure measuring range

0...2,5mbar :
0...5mbar :
0...10mbar :
0...25mbar :
0...50mbar :
0...100mbar :
0...250mbar :
0...500mbar :
0...1.000mbar :

EF 3…5 24 V

Conductive electrodes with 24 V DC direct connection

The conductive electrodes EF3...5 are approved by the "DIBt" as overfill prevention devices for liquids hazardous to water.

Properties

connection : integrierter Anschlusskopf
Protection class : IP 65
connection thread : G 1¼"
Material Screw connection : PPH
Material electrode rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal
material coating : PTFE
Coating length : voll = ganzer Stab (10 mm am Stabende sind blank) teil = ca. 250 mm von oben
Rod diameter : 4 mm, 6 mm
rod length : max. 6 m
Operating temperature : 85 °C
Operating pressure : atmosphärisch
Spacer : ab Länge > 1000 mm je 1000 mm 1 Abstandshalter

Properties electronic part

Operating temperature : –20...+85 °C
Storage temperature : –30...+85 °C
nominal voltage : 24 V DC ± 15%
Power consumption : max. 2 W (Klemme A1, A2)
Switching voltage : max. 250 V AC, 150 V DC min. 5 V DC (Relais mit Kombi-Goldkontakten)
Switching current : max. 3 A AC, 3 A DC min. 1 mA
Switching capacity : max. 750 VA, 150 W
Sensitivity : 3k ... 100 kΩ in vier Stufen (3 k, 10 k, 30 k, 100 kΩ) wählbar

ZT-V

Reliable pressure measurement and optimum process monitoring with the ZT series

From low to high pressure and suitable for liquid and gaseous media.

Connection

Signal output : 0...10 V, 3-Leiter | 0,5...4,5, ratiometrisch | 4...20 mA, 2-Leiter
Electrical connection : DIN EN 175301-803 A | DIN EN 175301-803 C | Binder M12x1 (Serie 713)
Process connection : G 1/4" ISO 1179-2 (Male Form E) | 1/4" NPT | 7/16" 20 UNF Male
measuring range (bar) : 0…0,6 | 0…600

Properties

Pressure type : Relativdruck | Absolutdruck
Housing : Edelstahl
Overpressure : 1,5* fach bis 400 bar, darüber 1,2* fach
Bursting pressure : 3* fach bis 600 bar, darüber 1,5* fach

Measurement parameters

response time : < 1 ms
Total error : ≤ 0,5 % FS
Non-linearity : ≤ 0,2 % FS
Non-repeatability : ≤ 0,10 % FS
Hysteresis : ≤ 0,15 % FS

ambient conditions

Temperature of the fluid : -40...+125 °C (0...+80 °C kompensierter Bereich)
Ambient temperature : -40...+105 °C
Storage temperature : -40°C...+125°C
Shock resistance : g 1000 gemäß IEC 60068-2-32
Vibration resistance : g 20 gemäß IEC 60068-2-6

TK-313

Evaluation unit with 2 change over limit contacts

The TK-313 limit comparator can be used in conjunction with our TK-30... continuous level sensors with 0(4)...20 mA or 0...10 V output signal for level control / measurement.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
nominal voltage : 24... 230 V AC/DC
Power consumption : 2 VA
Dimensions housing type B : 22,5 x 114,5 x 99
Dimensions housing type C : 22,5 x 114,5 x 114

Input

power : 0/4...20 mA
Voltage : 0...10 V
Resistance in three-wire circuit RG : 0–4...10 kΩ

Output

Output contacts : 2 Wechselkontakte
Switching voltage : max. 250 V AC
Switching current : max. 3 A
Switching capacity : max. 500 VA
Temperature influence tolerance : max. ± 0,6 % der Signalspanne
Mounting : Tragschiene nach EN 50022
Current output : 4...20 mA bezogen auf die Masse des Eingangs
Display (%) : 2-stellig, 7-Segment
Weight : 175 g
ltdata. :

Smart Pressostat App

App for control of ES-2X devices over Bluetooth

Android app for Bluetooth communication between smartphone or tablet and electronic safety switching devices from Fluid.iO

Properties

platform : Android
Android Version : 12

ZT-S

Functionally safe pressure transmitter for ES series

Reliable pressure measurement and optimal process monitoring thanks to the ZT series. Developed for high demands and safety-critical applications

Properties

Operating voltage : 12...32 V DC (max. 0,2 W)
Dimensions : Ø 22 x 59 (D x H), SW22
Housing : Edelstahl
Measuring range nominal pressure : -1…500 bar
Overpressure : 2 x Nenndruck
Bursting pressure : 4 x Nenndruck
Protection class : IP65
Output signal : ZILA-DIO

Operating conditions

Pressure type : Relativdruck
Temperature of the fluid : -40 …+125 °C
fluid temperature (optional) : -20 …+125 °C
Ambient temperature : -40 …+105 °C

electrical connection

Standard : Binder M12 x 1

TK-309-0

Stainless steel level sensor for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class Socket : IP65
Float type : Typ 07
Sliding tube length : max. 6000 mm
Operating temperature : max. 135 °C
Operating pressure : max. 20 bar
media density : Typ 07: 0,54 g/cm³
Resolution : 7,5 mm | 10mm |15 mm | 20 mm
Accessories : R/I-Wandler TK-101

LU-150

Compact Ultrasonic Level Sensor

Properties

Protection class EN60529 : IP 68
Power supply : 12...30 V DC / 0.1A Spitze
Power consumption : Max. 0,75 W (25 mA bei 24 V DC)
Output : 4...20 mA
Max. Load : 600 Ω bei 24 V DC
Measuring span : Proportional oder umgekehrt proportional
Measurable materials : Flüssigkeiten, Schlämme, Schuttgüter
operating temperature : –20...+60 °C
Opening angle : 12°
working pressure : Atmosphärisch
Display : 3-stelliges LCD
Process connection : Gewinde G 2" (BSPP) EN 10226 PVDF
Weight : 1,3 Kg
Cable entry : Kabelverschraubung M 20 x 1.5
Material housing electronics : Polybutylenterephthalat PBT
Material sensor / thread : PVDF-Copolymer

Input

Measuring range : 0,25...5,0 m
frequency : 54 kHz

Measuring Accuracy

Measurement deviation : ± 0,25 % vom Messbereich (in Luft)
Resolution : 3 mm
Temperature compensation : im Sensor integriert
Echo processing : „Sonic Intelligence“ von Siemens

HD-110 | HD-112 | HD-114

Hydrostatic screw-in probes (4...20mA | 0.8...10mWS)

Continuous and precise level measurement in unpressurised, open basins and tanks as well as underground applications such as shafts, wells and boreholes.

Properties

Protection class EN60529 : IP 65
Operating temperature : -10...70 °C
Storage temperature : -25...70 °C
Power supply : 15...30 V DC
power : max. 25 mA
Output : 2-Leiter-Technik | 4...20 mA
Measuring range : 0,8...10 mWs (Standard)
Overpressure : ca. 20 %
Deviation from characteristic curve : Nichtlinearität,
Insulation resistance : > 100 kΩ
Short-circuit resistance : permanent
Reverse polarity protection : keine Schädigung o. Funktion bei vertauschten Anschlüssen

Materials

Housing : Edelstahl 1.4571, PVC, PVDF
Measuring cell : Edelstahl 1.4404, Keramik AI2o3 96%, Keramik AI2o3 99,9%
Seals : FKM (Viton ®), EPDM, FFKM (Kalrez ®)
connection thread : G ¾“ | G 1 ½“
Plug : Steckverbindung DIN 43650

ER-107

Electrode Relays with general approval for constructions Z-65.13-405, Z-65.40-191

Electrode relays for conductive level detection with approved design as part of an overfill cut-out device (Z-65.13-405) / leakage protection (Z-65.40-191)

Properties

details : folgen

DTS-CAN

Flexible, digital pressure and temperature sensor with CAN bus

Media-immersed, flush-mounted, stainless steel pressure-temperature sensor with CAN bus

Properties

Operating voltage : 9...27V
Power consumption : 35 mA typ (50 mA max)
Dimensions : 75x22 mm
Process connection : G 1/4“

Measuring range

Temperature : -20…+100 °C
ltdata.Druck : (-1) 0…100 bar
ltdata.AbweichungDruck : max +/- 0,5 % FS @ 0-10°C
ltdata. :

MKL

Magnetic Flap Indicator

The MKL level indicator is connected by its two connections to the container to be monitored (see connection example). According to the law of interconnected containers the level in the float chamber corresponds exactly to the level in the container

Properties

connection : Flansch ab DN 15
Material : rostfreier Edelstahl, PVC, PPH, PVDF
Material flange : Edelstahl 1.4571, C22.8
Material Float : Edelstahl, Titan, PVC, PPH, PVDF
Number of contacts : beliebig
Contact load : max 10 VA, max 230 V AC
Display length : max. 6m

Operating temperature

PTFE seal : max. 150 °C
Stainless steel: Klingerit seal : max. 200 °C
PVC : max. 60 °C
PPH : max. 90 °C
PVDF : max. 130 °C

Stainless steel float

Weight : ~ 300 g
Dimensions : Ø 52 x 270
Operating pressure : 16 bar
media density : ρ ≥ 0,70 g/cm³

Stainless steel float

Weight : ~ 320 g
Dimensions : Ø 52 x 270
Operating pressure : 40 bar
media density : ρ ≥ 0,75 g/cm³

Titanium float

Weight : ~ 180 g
Dimensions : Ø 52 x 150
Operating pressure : 16 / 40 bar
media density : ρ ≥ 0,73 g/cm³

PVC float

Weight : ~ 331 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,8 g/cm³

PPH float

Weight : ~ 283 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,69 g/cm³

PVDF float

Weight : ~ 352 g
Dimensions : Ø 52 x 250
Operating pressure : 6 bar
media density : ρ ≥ 0,85 g/cm³

GSB-390

Glass float with magnet insert

for actuating monostable and bistable contacts

Variants

150 : AußenØ 26,5 x 150 mm (2 Magnete für monostabile Kontakte) Gewicht ca. 50 g
190 : AußenØ 26,5 x 190 mm (2 Magnete für monostabile Kontakte) Gewicht ca. 61 g
205 : AußenØ 26,5 x 205 mm (3 Magnete auch für bistabile Kontakte) Gewicht ca. 69 g

XR Relais

Electrode relays and contact protection relays

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised. The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Quiescent current : umschaltbar
Weight : ca. 250 g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

T205 VA

Stainless steel magnetic immersion probes

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 65
Number of floats : max. 2x Typ 08
connection cable : Silikon Litze
Operating temperature : max. 100 °C
Operating pressure : max. 10 bar (Zylinder)
Number of contacts : max. 2 x Schließer/ Öffner wahlweise durch 180°-Drehung des Schwimmers bei 2 Schwimmern
Switching current : 1 A
Switching voltage : 250 V AC
Switching capacity : 50 W/VA
Sliding tube length : max. 1000 mm
media density : Typ 08: 0,78 g/cm³
float : Zylinder Edelstahl 1.4571 27 mm Ø
min. contact distance with several floats : 50 mm

ER-Serie

Electrode Relays

Electrode relays for conductive level detection for all areas in which conductive, liquid media are to be detected, controlled or monitored

Properties

details : folgen

TK-32X

Luminous Row Displays

Luminous row displays of type series TK-320...TK-322 are used for visually displaying process states such as filling levels.

Type

TK-320 : Schaltschrankeinbaugehäuse 24 x 96 mm
TK-321 : Schaltschrankeinbaugehäuse 24 x 96 mm
TK-322 : 19” Karteneinschub 7 TE, 3 HE

Properties

Protection class EN60529 : IP 52
Operating temperature : – 20 °C...+60 °C
nominal voltage : 24 V DC...230 V AC
Input : 0(4)...20 mA | 0(2)...10 V DC | 5...10kΩ
Output : 4...20 mA | Bürde max. 500 Ω
Relay : 2 x Umschalter max. 230 V | min. 5 V | max. 3 A | min 1 mA

Display

Number of LEDs : 33 (rot/grün); 32 (TK-322)
Resolution : ca. 3,5 %
Error : ± 1 LED
connection : Schraubklemmen
connection TK-322 : Steckerleiste
Input : 0(4)...20 mA | 0(2)...10 V DC | 5...10kΩ
Output : 4...20 mA | max. load 500 Ω
Relay(2xSwitch) : max. 230 V | min. 5 V
Relay(2xSwitch) : max. 3 A | min. 1 mA

QFS-55

Teflon float switch in rod design

The float switch combination is built with float switches of the QFS-50 and QFS-60 series. This makes it possible to control a level in a simple way.

Technical Data

Material : PTFE (Teflon)
connection cable : Silikon, Teflon
Material rod : VA-Rohr, PTFE beschichtet
Operating temperature : max. +150 °C
media density : ρ ≥ 0,75 g/cm³
Switching system : Reed-Schalter
Contact : Wechsler, NO, NC
Inductive/capacitive loads : Unbedingt Kontaktschutz vorsehen
Ex-protection optional : Elektrische Daten siehe EG-Prüfbescheinigung IBExU10ATEX 1089

Reed contact

Switching current : 1 mA ... 1 A
Switching voltage : 24 ... 250 V AC/DC
Switching capacity : Max. 1A, 60 VA / 60 W
Switching hysteresis : ca. 100 mm
Switching angle : ca. +20°...–20°

Namur circuit (1kΩ/12kQ)

Switching current / switching voltage : nur zum Anschluss an KR-163... oder andere „Namur”-Relais
Switching hysteresis : ca. 100 mm
Switching angle : ca. +20°...–20°

TK-309

Stainless steel level sensor

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 07
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Operating pressure : max. 20 bar
media density : Typ 07: 0,54 g/cm³
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm | 1% | 2% | 5%
Accessories : R/I-Wandler TK-101

T200.F-24V

Overfill protection with 24V direct connection

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection

Polyester junction box : PO/ET-520
Polyethylene connection head : PE/ET-521

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating temperature : max. 80 °C
Operating pressure : atmosphärisch
media density : ρ ≥ 0,6 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Power supply

nominal voltage : 24 V DC (24…300V DC)
Power consumption : ≤ 1 W

Output

Output contact : 1 potentialfreier Wechselkontakt
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 3 A AC / 3 A DC
Switching capacity : max. 750 VA / 90 W

Optocoupler

Switching voltage : max. 30 V
Switching current : max. 100 mA
displays : Betriebs-LED grün, Funktions-LED rot
Switching delay : ca. 0,5 s Anzug/Abfall

EFV2 24V

adaptive conductive electrodes with and without 24 V direct connection

The conductive electrode EFV2 is approved by the "DIBt" as an overfill prevention device for liquids hazardous to water.

Connection

Box : Polyesterdose (PO)
Cable : Kabel (TPK)
Plug : Stecker (ST)

Properties

Protection class : IP 65
connection thread : G2"
Union nut : G2¾", S 100x8
Material Screw connection : PE, PVC, PPH, PVDF
Material Sensor rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal, Kohlestifte
Operating temperature : PE, PVC: atmosphärisch PPH : 90 °C, PVDF: 100 °C
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ je nach Ausführung

Operating temperature

PE : atmosphärisch
PVC : atmosphärisch
PPH : 90 °C
PVDF : 100 °C

Technical specifications electronic part

Operating temperature : –20...+85 °C
Storage temperature : –30...+85 °C
nominal voltage : 24...30 V DC
Power consumption : max. 2 W
Switching voltage : max. 230 V AC / V DC min. 5 V DC (CMOS-Relais)
Switching current : max. 0,12 A AC / A DC min. <1 mA
Switching capacity : max. 25 VA / W
Sensitivity : 3k … 100 kΩ

QFS-3X

Mercury-free float switch with µ-switch

Properties

Protection class EN60529 : IP 68
Cable entry : PVC , PTFE bzw. PVDF
Conductor cross-section : 3 x 0,75 mm², PUR 3x 0,5mm²
Operating pressure cylinder : max. 1 bar
Operating pressure sphere : max. 2 bar
Switching system : µ-Schalter
Contact : Wechsler, NO, NC

Material Float

QFS-30 : PPH (Polypropylen)
QFS-31 : PPH (Polypropylen)
QFS-34 : PE (Polyethylen)

Cable

TPK : PVC Basis Ø 5,9 mm
TPKV : PVC verstärkt Ø 7,3 mm
PUR : Polyurethan Ø 5,4 mm
SIL : Silikon Ø 6,4 mm
FEP : Teflon Ø 4,0 mm
AEM : Ethylen-Acrylat-Kautschuk

Cable length between float & attachment

TPK : 70 mm
TPKV : 90mm
PUR : 100mm
SIL : 80 mm
FEP : 110 mm
AEM : abhängig vom Innenkabel

Operating temperature

TPK(V), AEM : max. + 60 °C
PUR : max. + 70 °C
Silicone,Tefloncable with PE float : max. + 80 °C
Silicone, Teflon cable with PP float : max. + 85 °C

MaterialDensity

QFS-31 : ≥≥ 0,6 g/cm³
QFS-34 : ≥≥ 0,75 g/cm³
QFS-30 TPK(V) cable : ≥≥ 0,85 g/vcm³
QFS-30 PUR cable : ≥≥ 0,95 g/cm³
QFS-30 SIL cable : ≥≥ 0,90 g/cm³
QFS-30 FEP cable : ≥≥ 0,95 g/cm³
QFS-30AEM cable : ≥≥ 0,90 g/cm³

ZMF-200e-IR

Robust gas sensor for industrial applications with extended operating temperature range and wide-ranging approvals

The ZMF-20X series includes sensors & transmitters for measuring gas concentrations of various gases such as CO2, methane, propane and SF-6. This makes the sensors suitable for many applications. The ZMF-20X gas sensors are designed to be extremely rugged & suitable for use in harsh environments.

Properties

Operating conditions : -40 °C…+60 °C
Storage conditions : -40 °C…+85 °C
RelativeHumidity : 0…95 % nicht kondensierend
Measurement method : NDIR (dual beam technology)
Signal output : 4..20mA
Power supply : 12…24 V DC
Housing : Edelstahl
Standard cable length : 1,5 m
Certification : SIL2, ATEX (optional)
pressure conditions : 800...1200 mbar
screw thread : M46x1,5

Measuring ranges

in ppm : in vol%
0…2.000ppm : 0…0,2 % vol
0…5.000ppm : 0…0,5 % vol
0…10.000ppm : 0…1 % vol
0…20.000ppm : 0…2 % vol
0…50.000ppm : 0…5 % vol
0…200.000ppm : 0…20 % vol
0…1.000.000ppm : 0…100 % vol

Measuring Accuracy

below 25% of the range : ±1 % FS
below 50% of the range : 2 % FS
above 50% of the range : ±5 % FS

T-20X

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

KST-20 Vento-RN

Climate control with aH-Controlled technology and Rn-Protected seal

The KST-20 Vento/RN is a climate control unit with aH-Controlled technology and Rn-Protected seal for ventilation and dehumidification of all types of private, commercial and industrial rooms. With the three operating modes for ventilation, dehumidification and radon measurement, the KST-20 Vento climate control unit can be used flexibly in almost all living, working and industrial areas.

Properties

Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 160 x 90 x 50 mm
Housing : hochwertigem ASA+PC (UL 94 V-0) für harte Beanspruchung, flammwidrig und selbstverlöschend
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100 % rF
Measuring accuracy (humidity) : ±2 %
measuring range (Temperature) : -40…+80 °C
Measuring accuracy (temperature) : ±0,2 °C
measuring range (radon) : 0...1200 Bq/m³
Adjustable limits : 80...1000 Bq/m³

T200 Ex

Magnetic immersion probes with TÜV 02 ATEX 1795X approval for Ex zone 0

Magnetic immersion probes for detecting fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (category 1) is present in the gas space above the liquid and zone 1 (category 2) outside the container in the area of the junction box

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

ESE

Switching channel extension for ES series

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

CS-11

CO2 Sensor with digital Interface

Digital CO2 sensor CS-11 for measuring carbon dioxide concentration in mobile applications.

Properties CS-11

Measured variable: : CO2
Measuring range: : 0…5.000 ppm
Measuring principle: : optisch, NDIR
Housing : Kunststoff
measuring grid : 2 sec.
Accuracy : ± 50 ppm
Protocol : I²C-Bus
Operating conditions Temperature : -0°C … 50°C
Operating conditions Humidity : 0…85 % rH
Storage conditions Temperature : -30°C … 70 °C
Storage conditions Humidity : 0…85 % rH

Properties MV-CAN

Housing : Plastik
Mounting : Hutschienenmodul für Einbau in Schaltschrank
Operating voltage : 10…48 V
measuring grid : 2 sec.
CAN protocol : CANopen 2.0 A nach CiA DS 404
Physical Layer : nach ISO 11898
Option : Bereitstellung des EDS-Files
Operating temperature : -40°C … +80°C
Storage temperature : -40°C … +120 °C

XR-4x0 | XR-4x1

Electrode relay with ATEX

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Quiescent current : umschaltbar
Weight : ca. 250 g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

CSC-20 YUGO

Decentralised control unit, equipped with a CO2 sensor for needs-based ventilation

Decentralised CO2 monitoring with direct control of various supply and exhaust air elements such as fans and dampers (0..10.000 ppm)

Properties

Power supply : 230 V AC
measuring range (CO2) : 0..10.000 ppm
Measuring accuracy CO2 : ± 50ppm +3 % vom Messwert
Operating conditions : 0…50°C / 0…85 %rH
Storage conditions : -30…70°C / 0…85 %rH
Protection class : IP 31
EMV/ESD : EN 50082-1, EN 50082-2
Signal output : I²C

TK-302

Level transducer made of brass and stainless steel

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

connection : Dose
Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 03 (04)
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Operating pressure : max. 20 bar
Resolution : 10 mm | 15 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

MaterialDensity

Type 03 : 0,75 g/cm³
Type 04 : 0,65 g/cm³

OAA-300

Alarm Indicator (Measuring Transducer) with general approval for construction

Our alarm indicators type OAA-300 are stand-alone signaling devices with optic and acoustic alarm indication.

Properties

Protection class EN60529 : IP 65
Operating temperature : – 20…+60 °C
Storage temperature : – 30…+80 °C
Sensitivity : bei konduktiver Messung: 3, 10, 30, 100kΩ
Dimensions : 170 x 190 x 85 mm
Weight : ca. 0,8 kg

Control circuits

Open circuit voltage : max. 10 V DC
Short-circuit current : max. 10 mA
Switching delay : ca. 0,5 s

Power supply

nominal voltage : 230 V AC (optional 24, 115, 240 V AC 24 V DC
Nominal frequency : 48...62 Hz
Power consumption : max. 3 W/VA

Output

Switching voltage : max. 250 V
Switching current : max. 3 A
Switching capacity : max. 500 VA | max. 50 W
Volume : 75 dB

XR-6x0 | XR-6x1

Contact protection relay Measuring transducer

The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V, max. 250 V AC / 150 V DC
Switching current : min. 5 mA, max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW, max.100 VA / max. 50 W
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Baumusterprüfbescheinigung
Weight : ca. 170 g
Quiescent current : umschaltbar

TK-301 PTFE

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 16
connection cable : 1000 mm Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating temperature : max. 120 °C
Operating pressure : max. 3 bar
media density : 0,79 g/cm³
Resolution (depending on type) : 7,5 mm |10 mm | 15 mm | 20 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

T20x.F

Overfill protection for containers

Connection

Box : Polyester
Box : Aluminium
Box : Polyethylen
Box : Kabel
Box : Stecker

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating temperature : atmosphärisch; PP max. 90°C
Operating pressure : Max. 20 bar
media density : ρ ≥ 0,6 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Resistance value

Operational readiness : ca. 1 kΩ
overfill alarm : ca. 12 kΩ
Switching time : ca. 20 ms
ltdata. :

TK-307-0

Stainless steel level sensor for Ex-Zone 0 (Cat.1)

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

General data

Connection aluminium box : H30 x B50 x T45 mm
Connection polyester box : H56 x B80 x T75 mm
connection cable : 1000 mm PUR blau
Protection class Socket : IP65
Material Sliding tube : VA 1.4571
Material of the angle fastening : VA 1.4408
Sliding tube length : max. 6000 mm
Operating temperature : max. 130 °C
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm
Mounting : 2 Schlauchschellen
Accessories : R/I-Wandler TK-101

EE-2X

electrode, multiple for Ex-Zone 0 (Cat. 1)

The conductive electrodes of the EE-21/EE-22 series enable the monitoring of conductive liquids within the Ex area Zone 0 (Cat. 1).

Variants

cable connection on side : EE-21
cable connection on top : EE-22

Properties

connection : Edelstahl (1.4571)
Protection class EN60529 : IP65
Ex-protection : TÜV 02 ATEX 1796 X
Ex protection type : II 1 G Ex ia IIC T6 bzw. Ex ia IIB T6 / II ½ G Ex ia IIC T6 bzw. Ex ia IIB T6
connection thread : G1" | G1¼"
Cable entry EE-21 : Edelstahl (1.4571)
Cable entry EE-22 : Kunststoff
Rod diameter : 4 mm | 6 mm
rod length : max. 6.000 mm
Operating pressure media side : max. 40 bar
Spacer : ab Länge > 1000 mm je 1 pro 1000 mm

Material

electrode body : Edelstahl (1.4571)
Seal (head) : Viton
Seal (media side) : Viton | PTFE
Potential equalisation conductor connection : Edelstahl (1.4571)
electrode rods : Edelstahl (1.4571) | Hastelloy C | Tantal
Coating : PTFE

Operating temperature

Category 1 Class T6...T1 : 60 °C
Category 2 Class T6 : 80 °C
Category 2 Class T5 : 95 °C
Category 2 Class T4 : 130 °C (100°C)
Category 2 Class T3...T1 : 150 °C (100°C)

HD-1XX

Hydrostatic filling level measurement

Continuous and precise level measurement in unpressurised, open basins and tanks as well as underground applications such as shafts, wells and boreholes.

Lub-VDT USB-Kit

Software and USB kit for configuration & evaluation

Properties

details : folgen

T-200.L Ex

Leakage probes with general building authority approval for hazardous areas

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaking water-polluting liquids. The T-200.L Ex may be used as leakage probes in hazardous areas, zone 1 (category 2).

Connection

Box : Ex-Polyesterdose (PO)

Properties

Protection class : IP 65
Cable entry : PVDF-Verschraubung, PVC-Dichtung
Material Float : PE
Material leakage probe base : PE
Cable : TPK (PVC Basis)
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
media density : mit Schwimmer PE 52 ρ ≥ 1,05 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Resistance value

Operational readiness : ca. 1 kΩ
Leakage detection : ca. 12 kΩ
Switching time : ca. 20 ms

NP-25X

Pneumatic level switch

Reliable & simple probe for sensing aggressive, sticky or heavily contaminated liquids, especially suitable as overflow protection.

Properties NP-250 | NP-252

Connection head : PA
Protection class EN60529 Connection head : IP 54
connection thread : ab G½”
Container connection flange : ab DN 25
Pitot tube material : PVC
Material Screw connection : PVC
Material flange : PVC
Hose Ø : 16 mm / 25 mm
Operating temperature : max. +60 °C
medium temperatur : max. +60 °C
Contact : Wechsler
Switching voltage silver : 250 V AC
Switching voltage gold : 24 V AC
Switching current silver : 6 A
Switching current gold : 100 mA

Properties NP-251 | NP-253

Connection head : PS
Protection class EN60529 Connection head : IP 54
connection thread : ab G½”
Container connection flange : ab DN 25
Pitot tube material : 1.4571
Material Screw connection : 1.4571
Material flange : 1.4571
Hose Ø : 15 mm / 28 mm
Operating temperature : max. +60 °C
medium temperatur : max. +90 °C
Contact : Wechsler
Switching voltage silver : 250 VAC
Switching voltage gold : 24 V AC
Switching current silver : 6 A
Switching current gold : 100 mA

ZCS-5000

Self-contained CO2 sensor ZCS-5000 in small housing with warning horn

stand alone CO2 sensor for measuring and monitoring carbon dioxide concentration in ambient air.

Properties

Housing : Kunststoff
Power supply 24V : 24V DC | 230V

Measuring element and parameter

Measuring principle : optisch, NDIR
measuring grid : 2 sec.
Accuracy : ± (50ppm+3% vom Messwert) im Bereich von 300…5.000ppm CO2

Operating conditions

Operating temperature : 0…+50 °C
Storage temperature : -30 °C…+75 °C
Operating humidity : 0…85% rH (nicht kondensierend)
Storage humidity : 0…85% rH (nicht kondensierend)

T206

Magnetic immersion probes made of PP or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Number of contacts : 1 x Schließer/Öffner durch 180°-Drehung des Schwimmers
Switching current : 1 A
Switching capacity : 50 W/VA

T206PP

Float type : max. 2 x Typ 12 (13)
max. 2x Type 12(13) : LiYY-Kabel 0,14 mm² | PVC-Litze 0,24 mm²
Operating temperature : 60 °C
Operating pressure : drucklos
media density : Typ 12: 0,93 g/cm³ | Typ 13: 0,68 g/cm³
min. contact distance with several floats : 50 mm

T206VA

Protection class EN60529 : IP 65
Float type : max. 2 x Typ 08
connection cable : PTFE-Litze 0,24 mm²
Sliding tube length : max. 1000 mm
Operating temperature : max. 100 °C
Operating pressure : max. 10 bar
media density : Typ 08: 0,78 g/cm³
min. contact distance with several floats : 42 mm

ViscoScope® VA-100

Inline Viscometer

Maintenance-free inline viscosity sensor for precise and reliable real-time measurement of viscosity directly in the process.

Properties

Material : 1.4571 / 1.4404 (316Ti / 316L)
Protection class : IP65
Process temperature : -10°C … +130°C | (integriertes Pt100 im Messfühler)
max. process pressure : Vakuum ... 64 bar
Process connections : NPT | M48 | Varivent® | Tri-Clamp
Cable length sensor - transmitter : Max. 1.000 Meter
max. flow velocity : 5 m / sec
Ex approval : II 1/2G Ex ia IIC T6...T3 Ga/Gb | (optional)

Sensor types

Sphere : VA-100B
Cylinder : VA-100C

Repeatability

VA-100B : ± 0,5% | ± 1 Digit
VA-100C : ± 0,3% | ±1 Digit

Measuring ranges

VA-100C : 0,1 - 2.500 mPa·s x g/cm³
VA-100B : 10 - 25.000 mPa·s x g/cm³

Probe dimensions

VA-100C : Ø 32 x 145 mm
VA-100B : Ø 32 x 120 mm

installation positions

Reservoir :
tanks :
Pipe :
flow cell :
Installation is position-independent :

ELH

Suspension electrode as leakage probe

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

General data

Protection class : IP 68
Probe body material : PE, PVC, PPH, PVDF
Diameter probe body : 15 mm, 25 mm, 40 mm
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ

Material

Screw connection : PVDF
Cable : TPK ( PVC Basis)
on request : FEP (Teflon), PVC - blau
cable length : auf Wunsch (Standard 3 m)
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Glas-Kohlestifte

ES-22

electronic safety pressure limiter with 2 safety functions

TÜV-certified, type-tested electronic safety switching device (SIL2)

Properties

Operating voltage : 16...32 V DC (max. 5,9 W)
Dimensions : 150 x 60 x 42 mm (L x B x H)
Housing : Aluminium (eloxiert)
Protection class : IP65

Approvals

DGRL 2014/68/EU Kat:IV : Baumustergeprüft gemäß Druckgeräterichtlinie
DIN EN12263:1998 : Kälteanlagen und Wärmepumpen Sicherheitsschalteinrichtungen zur Druckbegrenzung -Anforderungen und Prüfungen; Kategorie IV
DIN EN378:2020 : Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen
DIN EN61508:2011 : SIL2

Measuring ranges

Measuring range relative pressure (nominal pressure) : -1…500 bar
Measuring range differential pressure (nominal pressure) : 0…1 mbar - 0…1.000 mbar
Setting accuracy (from nominal pressure) : 0,1 %

Operating conditions

Pressure type : Relativdruck, Differenzdruck
Temperature of the fluid : -40…+125 °C
Ambient temperature : -20…+65 °C
Parts in contact with media : Edelstahl

process connection

Version relative pressure : G ¼“ Innengewinde
Version differential pressure : G ⅛“ Innengewinde
Adapter for process connection : 6mm; 8mm oder 10mm

electrical connection

Analogue current output : 1x 4…20 mA
Digital inputs/outputs : 2x Alarm oder 1x Alarm & 1x Fernentriegelung

Load capacity of the switching contacts DC (24V)

DC1 : 16 A
DC13 : 1,5A

Load capacity of the switching contacts AC (230V)

AC1 : 16 A
AC3 : 10 A
AC15 : 7 A

T200

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

NSP-X-E

Vibrating Limit Switch

The vibrating limit switch is a level limit switch for all kinds of fluids and is used in tanks, containers and pipelines.

Properties

Protection class EN60529 : IP 65/IP 67
Operating pressure : ≤ 40 bar
media density : ρ ≥ 0,7 g/cm³
Viscosity : max. 10000 mm²s
Rated current : < 15 mA
Protection class : III
Output : PNP
power : kurzschlussfest, überlastsicher
Display : LED (grün, rot)
Switching delay (cover) : ca. 0,5 s
Switching delay (release) : ca. 1 s

NSP-1-E

connection thread : G 1”
Operating temperature : –40...+150 °C
Storage temperature : –40...+85 °C
nominal voltage : 10...55 V DC (verpolsicher)
Current output : ≤ 350 mA

NSP-2-E

connection thread : G ½”
Operating temperature : –40...+100 °C
Storage temperature : –20...+70 °C
nominal voltage : 10...35 V DC (verpolsicher)
Current output : ≤ 250 mA

TK-312

Evaluation unit with 0/4... 20 mA current output

The TK-312 measuring transducer converts the resistance signal supplied from a continuous level sensor into a current signal proportionate to the level.

Properties