Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

38 article(s) in your cart
pos.	image	product	Configure	Actions
1		BK-380
2		Ex-QFS-3x
3		KS-410 KS-420
4		ZDS-H
5		TPS-Serie
6		T200.F
7		EF2...5
8		T-20X
9		T-200.L Ex
10		T-20x.F 230V
11		T205 VA
12		LGW-13
13		PPS-390
14		EF 3…5 24 V
15		NSP-X-E
16		ÜTA-32
17		TK-30X
18		KST-20 Vento
19		T-200.L
20		Lub-VDT USB-Kit
21		ELH
22		QFS-1X
23		XR-6x0 \| XR-6x1
24		HE
25		T204
26		DS-CAN-01
27		KS-CAN-03
28		TK-308
29		TK-312
30		EE-2X
31		TK-32X
32		T200.F-24V
33		XR Relais
34		KS-Serie
35		SG2420
36		KG-2XX
37		ZDT-Serie
38		TSL-CAN-03

BK-380 configure

1 Kontakt

2 Stecker

Amount

additional infomation

Ex-QFS-3x configure

1 Schwimmertyp

2 Kontakt

3 Schaltkontakt

4 Kabelmaterial

5 Kabellänge

6 Beschwerungsgewicht

Amount

additional infomation

EF2...5 configure

1 Elektrodenanzahl

2 Verschraubungsmaterial

3 Stabmaterial

4 Stabdurchmesser

5 Elektrodenbeschichtung

6 Anschlussgewinde

7 Kabelbruchwiderstand

8 Auswerteelektronik

9 Stablänge

10 SIL2

Amount

additional infomation

T-200.L Ex configure

1 Länge

2 Anschluss

3 Anschlussgewinde

4 Schwimmertyp

5 Ex

Amount

additional infomation

T-20x.F 230V configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schwimmermaterial

7 Anschluss-Elektronikteil

8 Länge

Amount

additional infomation

PPS-390 configure

1 Mediumsdichte

2 Magnetposition

Amount

additional infomation

EF 3…5 24 V configure

1 Sicherheitsfunktion

2 Elektrodenanzahl

3 Anschlussgewinde

4 Stabmaterial

5 Stabdurchmesser

6 Beschichtung

7 Auswerteelektronik

8 Stablänge

9 SIL

Amount

additional infomation

NSP-X-E configure

1 Messbereiche

2 Gabeloberfläche

Amount

additional infomation

ÜTA-32 configure

1 Float

2 Guide-rod

3 Length

Amount

additional infomation

TK-30X configure

1 Rohrdurchmesser

2 Rohrmaterial

3 Gewinde

4 Ausführung

5 Schwimmerausführung

6 Anschluss

7 Rohrlänge

8 Auflösung

9 Zubehör

Amount

additional infomation

KST-20 Vento configure

1 Innensensor

2 Außensensor

Amount

additional infomation

T-200.L configure

1 Länge

2 Anschluss

3 Anschlussgewinde

4 Befestigungswinkel

5 Schwimmertyp

Amount

additional infomation

QFS-1X configure

1 Schwimmertyp

2 Kontakt

3 Schwimmermaterial

4 Kabelmaterial

5 TPK

6 Kabellänge

7 Ex

Amount

additional infomation

XR-6x0 | XR-6x1 configure

1 Kanalanzahl

2 Option

3 Gehäuse

4 Ausgang

5 Schaltverzögerung

6 Versorgungsspannung

7 Busanschluss

8 SIL

9 ATEX

Amount

additional infomation

HE configure

1 Elektrodenkörper

2 Verschraubung

3 Elektrodenanzahl

4 Stabmaterial

5 Länge

6 EX

7 SIL

Amount

additional infomation

KS-CAN-03 configure

1 Protectice Cap

Amount

additional infomation

TK-308 configure

1 Rohr-Verschraubungs-Material

2 Gewinde

3 Ausführung

4 Schwimmerausführung

5 Anschluss

6 Rohrlänge

7 Auflösung

8 Zubehör

Amount

additional infomation

TK-312 configure

1 Housing

Amount

additional infomation

EE-2X configure

1 Typ

2 Elektrodenanzahl

3 Anschlussgewinde

4 Stabmaterial

5 Stabdurchmesser

6 Beschichtung

7 Stablänge

8 SIL2

Amount

additional infomation

TK-32X configure

1 Ausführung

2 Leuchtdiode

Amount

additional infomation

T200.F-24V configure

1 Führungsrohr

2 Sicherheitsfunktion

3 Rohrmaterial

4 Anschlussgewinde

5 Ausführung

6 Schwimmermaterial

7 Anschluss-Elektronikteil

Amount

additional infomation

KG-2XX configure

1 Versorgungsspannung

2 Gehäuse

3 Kontakte

4 Halterung

Amount

additional infomation

BK-380

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

Properties

Protection class EN60529 : IP 65
Operating temperature : –25...+70 °C
Wire cross-section max. : 1,5mm²
Switching point distance between two contacts : min. 40 mm
Switching hysteresis : ca. 10-15 mm

Material

Housing : Polycarbonat
Mounting clip : V2A, Kabelbinder (PP)
Rivet : V2A
Screw connection : M 20 x 1.5, Polyamid

Weight

BK-390-50 : 137 g
BK-390-63 / BK-380 : 140 g

Switching contact

Switching voltage : 5...250 V AC/DC
Switching current : 1mA...6 A AC/DC
Switching capacity(min.) : 300 VA, 60 W
Switching capacity(max.) : 5 mW

Ex-QFS-3x

Mercury-free float switches with Ex approval

These float switches have a mercury-free switching system consisting of a microswitch and a ball which actuates this switch.

Technical Data

Protection class EN60529 : IP 68
Material Float : PP
Cable : TPK (PVC Basis), PVC Basis verstärkt, Polyurethan, Silikon, Teflon, Ethylen-Acrylat-Kautschuk
Conductor cross-section : 3x 0,75 mm², Polyurethan 3x 0,5 mm²
Operating temperature TPK(V) : AEM Kabel max.+ 60 °C
Operating temperature PUR cable : max.+ 70 °C
Operating temperature SIL, FEP cable : max.+ 85 °C
Operating pressure : max. 1 bar Zylinder| max. 2 bar Kugel
Switching system : Mikroschalter
Contact type : Wechsler, NO, NC
Electrical connection data, Ex-protection : siehe EG-Prüfbescheinigung TüV 09 ATEX 555342
Inductive/capacitive loads : Unbedingt Kontaktschutz vorsehen
CE marking : siehe Konformitätserklärung
Weight : ca. 200 g

Media density Ex-QFS-30

TPK(V) cable : ρρ 0,85 g/cm³
PUR cable : ρρ 0,95 g/cm³
SIL cable : ρρ 0,90 g/cm³
FEP cable : ρρ 0,95 g/cm³
AEM Cable : ρρ 0,90 g/cm³

Media density Ex-QFS-31

Sphere : ρρ 0,60 g/cm

Mounting position

Ex-QFS-30 : waagerecht mit G1” Verschraubung, senkrecht mit Beschwerungsgewicht (Ex)
Ex-QFS-31 : waagerecht mit Flansch ab DN 100 (PP)

KS-410 KS-420

Sensors for temperature & humidity measurement in aluminium or polycarbonate housing

The KS series sensors are modular temperature and humidity measurement sensors in compact housings for use in almost any application.

Specifications

Housing shapes : Stabform | Alu- oder Polycarbonatgehäuse
measurands : Temperatur | relative Feuchte
Measuring range : -40...+80 °C | 0...100% rH
Signal output : 0...10 V oder 4…20 mA
Power supply : 12...30 V DC | 24 V DC

properties KG-410

Operating voltage : 12...30V DC
Power consumption : < 15mA

properties KG-420

Operating voltage : 24V DC
Loop voltage min: : Bürde(Ohm) *0,02 + 8 V
Loop voltage max: : 30V

General properties

Housing : Alu-Gehäuse mit Edelstahlstab oder Polycarbonat
Dimensions (LxBxH in mm) : 30 x 45,4 x 97,3
Protection type/class : Gehäuse IP66, Stecker IP 67
Weight : 96g

Measuring range

measuring range (Humidity) : 0…10% rH
Measuring accuracy (humidity) : ± 2%
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V | 4...20mA

ZDS-H

Precision pressure switch for high-pressure applications up to 2,000 bar

Can be used in oil, brake fluid, diesel, air and other gases. With very good stability and overpressure resistance.

Properties

Pressure range : 0...2.000 bar gestuft
supply : 24 V DC
Output : Relais 60 V AC/1A
overload : 1,5 x Messbereich
Med. connection : G 1/4 Zoll
electrical connection : Schraubklemme
feature : Tasten, LCD-Anz.

TPS-Serie

Sensors for determining the dew point in a wide range of applications

The dew point sensors of the enable direct measurement of the dew point and ambient temperature indoors and outdoors.

Operating conditions

Temperature: : -40...80°C
rel. Humidity : 0 - 100% rH

Measuring range

measuring range (dew point) : -50...+80°C
measuring range (Temperature) : -40...+80°C
Measuring accuracy (temperature) : ± 0,2°C
Signal output : 0...10V oder 4...20mA

T200.F

Overfill protection for containers

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

Connection

Polyester junction box :
Aluminum housing :
Polyethylene connection head :
Cable :
Plug :

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating pressure : Max. 20 bar
media density : ρ ≥ 0,6 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm
Operating temperature : atmosphärisch
PP : max. 90°C

Resistance value

Operational readiness : ca. 1 kΩ
overfill alarm : ca. 12 kΩ
Switching time : ca. 20 ms
ltdata. :

EF2...5

Conductive Electrodes with general approval for constructions

Conductive electrodes type EF2...5 are approved by the “DIBt” (German Institute for Structural Engineering) as liquid level limit switches for the overfill protection of containers for storing water-endangering liquids

Properties

Protection class EN60529 : IP 65
connection thread : G1" | G1¼" | G1½"
Union nut : G2¾" | S 100x8
Operating temperature PE / PVC : atmospheric
Operating temperature PPH : 90°C
Operating temperature PTFE : 100°C
Operating pressure : atmospheric
Resistance value of line monitoring : 22 kΩ / 100 kΩ
Spacer form length > 1000 mm : 1 per 1000 mm
rod length : max. 6.000 mm
Rod diameter : 4mm | 6 mm

Material

Screw connection : PPH | PE | PVC | PTFE
Sensor rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal
Coating : PTFE
ltdata. :

T-20X

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
Connector plug : 3- und 6-fach
connection thread : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
connection cable : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
Sliding tube length : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
Operating pressure : max. 20 bar
Viscosity : < 100 cp
Protection class EN60529 : IP 68 Führungsrohr
Switching voltage : max. 250 V
Switching hysteresis : ca. 2...5 mm
Holding range : ca. 12 mm
Contact function : monostabil | bistabil

Operating temperature

ltdata. : max. +60...+150 °C
ltdata. : min. –20... –10 °C
ltdata. : höhere oder niedrigere Temperaturen auf Anfrage

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 8
normally open : 10
Normally closed contact : 7

T-200.L Ex

Leakage probes with general building authority approval for hazardous areas

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaking water-polluting liquids. The T-200.L Ex may be used as leakage probes in hazardous areas, zone 1 (category 2).

Connection

Box : Ex-Polyesterdose (PO)

Properties

Protection class : IP 65
Cable entry : PVDF-Verschraubung, PVC-Dichtung
Material Float : PE
Material leakage probe base : PE
Cable : TPK (PVC Basis)
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
media density : mit Schwimmer PE 52 ρ ≥ 1,05 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Resistance value

Operational readiness : ca. 1 kΩ
Leakage detection : ca. 12 kΩ
Switching time : ca. 20 ms

T-20x.F 230V

Overfill protection for containers

Connection

Box : Polyester

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating temperature : max. 80°C
Operating pressure : atmosphärisch
media density : ρ ≥ 0,6 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Power supply

nominal voltage : 24…230 V AC/DC
Power consumption : ≤ 2 W

Output

Output contact : 2 potentialfreie Wechselkontakte
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 5 A AC / 5 A DC
Switching capacity : max. 750 VA / 90 W
displays : Betriebs-LED grün, Funktions-LED rot
Switching delay : ca. 0,5 s Anzug/Abfall
CE marking : siehe Konformitätserklärung

T205 VA

Stainless steel magnetic immersion probes

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

Properties

Protection class : IP 65
Number of floats : max. 2x Typ 08
connection cable : Silikon Litze
Operating temperature : max. 100 °C
Operating pressure : max. 10 bar (Zylinder)
Number of contacts : max. 2 x Schließer/ Öffner wahlweise durch 180°-Drehung des Schwimmers bei 2 Schwimmern
Switching current : 1 A
Switching voltage : 250 V AC
Switching capacity : 50 W/VA
Sliding tube length : max. 1000 mm
media density : Typ 08: 0,78 g/cm³
float : Zylinder Edelstahl 1.4571 27 mm Ø
min. contact distance with several floats : 50 mm

LGW-13

CO2 sensor for measuring room air quality with visual and acoustic warning signal output

Multifunctional CO2 sensor with LED display and acoustic alarm, equipped with switching functions for both industrial and private applications (0...3.000ppm)

Product features

Product type : CO2-Sensor zur Bewertung und Überwachung der Luftgüte
Measuring principle : Basierend auf optischem Messprinzip (NDIR)
Measuring range : Lieferbar in unterschiedlichen Messbereichen (Standard 0…3.000ppm)
Display : Darstellung der CO2-Konzentration mittels Bargraphanzeige (Luftgüteampel)
Switching output : Einstellbarer potentialfreier Schaltausgang
Signal output : 4...20 mA und 0...10 V Signalausgang (nur bei der Variante L)
Alarm : Akustischer Alarmmelder (je nach eingestellten CO2-Grenzwerten)
further function : Integrierte Funktionsüberwachung
Housing : Kompaktes IP 20 Wandgehäuse (Polycarbonat, weiß)
Extension : Mögliche Erweiterung um Temperaturmessung
Assembly : Erhältlich als Tischgerät mit Netzteil oder zur Wand- & Aufputzmontage ohne Netzteil

Technical specifications

Standard measuring range: : 0…3.000ppm
Optional measuring ranges: : 0…1% vol, 0…3% vol (weitere auf Anfrage)
Accuracy : +-3% vom Messbereich (30 ppm bei 3.000 ppm)
Relay output: : Potentialfrei
Response time : ca. 20 s
Operating voltage : 24 V DC, 150 mA

PPS-390

PPH float with magnet insert

for actuating monostable and bistable contacts

Variants

32 : AußenØ 26 x 180 mm, für RohraußenØ 32 u. 34 mm Gewicht ca. 38 g
37 : AußenØ 29,5 x 170 mm, für RohraußenØ 40 mm (PN 16) Gewicht ca. 62 g
40 : AußenØ 40 x 165 mm, für RohraußenØ 50 mm Gewicht ca. 145 g
50 : AußenØ 50 x 125 mm, für RohraußenØ 63 mm Gewicht ca. 156 g

EF 3…5 24 V

Conductive electrodes with 24 V DC direct connection

The conductive electrodes EF3...5 are approved by the "DIBt" as overfill prevention devices for liquids hazardous to water.

Properties

connection : integrierter Anschlusskopf
Protection class : IP 65
connection thread : G 1¼"
Material Screw connection : PPH
Material electrode rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal
material coating : PTFE
Coating length : voll = ganzer Stab (10 mm am Stabende sind blank) teil = ca. 250 mm von oben
Rod diameter : 4 mm, 6 mm
rod length : max. 6 m
Operating temperature : 85 °C
Operating pressure : atmosphärisch
Spacer : ab Länge > 1000 mm je 1000 mm 1 Abstandshalter

Properties electronic part

Operating temperature : –20...+85 °C
Storage temperature : –30...+85 °C
nominal voltage : 24 V DC ± 15%
Power consumption : max. 2 W (Klemme A1, A2)
Switching voltage : max. 250 V AC, 150 V DC min. 5 V DC (Relais mit Kombi-Goldkontakten)
Switching current : max. 3 A AC, 3 A DC min. 1 mA
Switching capacity : max. 750 VA, 150 W
Sensitivity : 3k ... 100 kΩ in vier Stufen (3 k, 10 k, 30 k, 100 kΩ) wählbar

NSP-X-E

Vibrating Limit Switch

The vibrating limit switch is a level limit switch for all kinds of fluids and is used in tanks, containers and pipelines.

Properties

Protection class EN60529 : IP 65/IP 67
Operating pressure : ≤ 40 bar
media density : ρ ≥ 0,7 g/cm³
Viscosity : max. 10000 mm²s
Rated current : < 15 mA
Protection class : III
Output : PNP
power : kurzschlussfest, überlastsicher
Display : LED (grün, rot)
Switching delay (cover) : ca. 0,5 s
Switching delay (release) : ca. 1 s

NSP-1-E

connection thread : G 1”
Operating temperature : –40...+150 °C
Storage temperature : –40...+85 °C
nominal voltage : 10...55 V DC (verpolsicher)
Current output : ≤ 350 mA

NSP-2-E

connection thread : G ½”
Operating temperature : –40...+100 °C
Storage temperature : –20...+70 °C
nominal voltage : 10...35 V DC (verpolsicher)
Current output : ≤ 250 mA

ÜTA-32

Overfuelling indicator

The top-mounted tank indicator is a mechanically operated, on-the-spot indicator. The liquid level in the tank located below the indicator is determined proportionately to the filling level and is indicated. Control of the level is easily achieved through the installation of switching contacts. The switching points for level control can be steplessly adjusted, on-the-spot and at any time.

Properties

connection : G 1” (andere Gewinde auf Anfrage)
max.length guide tube : siehe Diagramm
Operating temperature : atmosphär. Bedingungen
Operating pressure : atmosphär. Bedingungen
media density : siehe Eintauchtiefe
Number of contacts : beliebig
Contact load : max. 10 VA, max. 230 V AC
Length : max. 1750 mm

Material

Sight tube : PVC transparent
connection : PVC-Verschraubung mit PTFE-Stangenführung
Guide rod : Edelstahl, Titan, Hastelloy B, Hastelloy C oder PVCRohr
float : PE / PP

TK-30X

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Properties

connection : Polyesterdose | Aluminiumdose | Stecker nach DIN 43650
connection thread : G 3/8”, G 1/2”, G 1”, G 1 1/2”, G 2”, G 3”
connection cable : LiYY max. 80 °C | Silikon max. 130 °C
Sliding tube length : max. 6000 mm
Operating temperature : max. +60...+130 °C | min. –20...–10 °C je nach Ausführung
Operating pressure : max. 20 bar je nach Ausführung
media density : siehe Schwimmerdaten
Viscosity : < 100 cp
Switching hysteresis : ca. halbe Auflösung
Resolution : 7,5 mm, 10 mm, 15 mm, 20 mm oder 1 %, 2 %, 5 % je nach Ausführung
Total resistance : ca. 5 kΩ
Measuring voltage : max. 24 V
Measuring current : max. 5 mA

KST-20 Vento

Automatic, controlled ventilation and dehumidification as well as cooling of rooms with aH-Controlled technology*.

The KST-20 Vento is a climate control unit with aH-Controlled technology for ventilation, dehumidification and cooling for all types of private, commercial and industrial rooms. With the three operating modes for ventilation, dehumidification and cooling, the KST-20 Vento climate control can be used flexibly in almost all living, working and industrial areas.

Properties

Power supply : 230 V AC
Protection class : IP 65
Dimensions (LxBxH) : 160 x 90 x 50 mm
Housing : hochwertiges ASA+PC (UL 94 V-0) für harte Beanspruchung, flammwidrig und selbstverlöschend
Signal output : I²C

Measuring range

measuring range (Humidity) : 0…100% rF,
Measuring accuracy (humidity) : ±2%
measuring range (Temperature) : -40…+80°C
Measuring accuracy (temperature) : ±0,2°C

T-200.L

Leakage probes with general building authority approval

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

Connection

Box : Polyesterdose (PO)
Box : Polyethylen-Anschlusskopf (PE)
Cable : Kabel (TPK)
Plug : Stecker (ST)

Properties

Protection class : IP 65
Cable entry : PVDF-Verschraubung , PVC-Dichtung
Material Float : PE
Material leakage probe base : PE
Cable : TPK (PVC Basis)
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
media density : mit Schwimmer PE 52 ρ ≥ 1,05 g/cm³
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Resistance value

Operational readiness : ca. 1 kΩ
Leakage detection : ca. 12 kΩ

Lub-VDT USB-Kit

Software and USB kit for configuration & evaluation

Properties

details : folgen

ELH

Suspension electrode as leakage probe

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

General data

Protection class : IP 68
Probe body material : PE, PVC, PPH, PVDF
Diameter probe body : 15 mm, 25 mm, 40 mm
Operating temperature : atmosphärisch
Operating pressure : atmosphärisch
Resistance value of line monitoring : 22 kΩ / 100 kΩ

Material

Screw connection : PVDF
Cable : TPK ( PVC Basis)
on request : FEP (Teflon), PVC - blau
cable length : auf Wunsch (Standard 3 m)
Material Sensor rods : Edelstahl (1.4571), Hastelloy B, Hastelloy C, Titan, Tantal, Glas-Kohlestifte

QFS-1X

Float switch with reed switch (mercury-free)

Inside the float, one or two reed contacts with a movable permanent magnet are inserted as a switching element.

Properties

Protection class EN60529 : IP 68
Cable entry : PVC , PTFE
Conductor cross-section : 3 x 0,75 mm², PUR 3x0,5mm²
Switching system : Reed-Schalter
Contact : Wechsler, NO, NC (QFS-11 nur NO oder NC)
Switching voltage : 4...250 V AC/DC
Switching current : 1 mA ...1 A
Switching capacity : max. 1A, 60 VA/60 W
Switching hysteresis : ca. 100 mm
Switching angle : ca. + 20° / – 20°

Float

Material Float : PE (Polyethylen)
ltdata. :
ltdata. :
ltdata. :

Operating temperature

TPK(V), AEM : max. + 60 °C
PUR : max. + 70 °C
Silicone,Tefloncable with PE float : max. + 80 °C

Operating pressure

Cylinder : max. 1 bar
Sphere : max. 2 bar

XR-6x0 | XR-6x1

Contact protection relay Measuring transducer

The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V, max. 250 V AC / 150 V DC
Switching current : min. 5 mA, max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW, max.100 VA / max. 50 W
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Baumusterprüfbescheinigung
Weight : ca. 170 g
Quiescent current : umschaltbar

HE

Pendant electrodes – single, multiple

suitable for high tanks, wells and sewers

tdata.AnschlussmitDose

Protection class EN60529 : IP 54
connection thread : G 2”

tdata.AnschlussohneDose

Protection class EN60529 : IP 67
connection thread : n.a. / G 2”

Material

electrode body : PVC, PTFE, PPH
Screw connection : PVC, PTFE
Cable : PVC, PTFE
electrode rods : Edelstahl (1.4571), Hastelloy C, Titan, Tantal

Operating temperature

HE_PVC : 60 °C
HE-PTFE : 150°C

T204

Magnetic immersion probe made of stainless steel (1.4571)

For use with highly aggressive liquid media to detect level limit values in containers. Suitable for use in hazardous areas, zone 0 (category 1).

Properties

connection : Polyesterdose | Aluminiumdose
Protection class EN60529 : IP 65 Anschlussdose
connection thread : G1 1/2" | G2"
Sliding tube length : max. 6000 mm (Rohr Ø 12 mm)
Operating pressure : max. 20 bar (Kugel) | max. 15 bar (Zylinder)
Operating temperature : max. 135 °C
Number of floats : max. 4

Float type

Stainless steel ball 52mm ⌀ : Dichte: 0,75 g/cm³ | mind. Kontaktabstand: 75 mm
Stainless steel ball 62mm ⌀ : Dichte: 0,65 g/cm³ | mind. Kontaktabstand: 85 mm
Stainless steel cylinder 44 mm Ø : Dichte: 0,76 g/cm³ | mind. Kontaktabstand: 75 mm

Switching capacity

Changeover contact : 60 W/VA
normally open : 100 W/VA
Normally closed contact : 60 W/VA

Switching current

Changeover contact : max. 1 A
NO/NC contact : max. 2 A

Contacts

Changeover contact : 4
normally open : 6
Normally closed contact : 4

DS-CAN-01

CANopen pressure transmitter with CAN bus signal output

Versatile, media-compatible pressure transmitter with CAN bus interface.

technical properties

Pressure type : Relativdruck gegen Umgebungsdruck bzw. gegen interne Atmosphäre
measuring resolution : 10 Bit
Measuring accuracy : Klasse 0,5 bei RT
Total error : < 1,5 % v.E bei -10 °C … +80 °C.
measuring grid : ab 5 ms
CAN protocol : CANopen 2.0 A
Physical Layer : nach DIN 11898

ambient conditions

Operating temperature range : -40 °C … +80 °C
Storage temperature range : -40 °C … +120 °C
Shock resistance : 30 g, Dauer
Vibration resistance : 10 g bei 20-1000 Hz
EMC/ESD : EN 50082-1 und EN 50082-2
Duration : 14 ms bei RT

Pressure measuring ranges

kPa : bar
0...500 : 0…5
0...1.000 : 0…10
0...2.000 : 0…20
0...5.000 : 0…50
0...10.000 : 0…100
0...35.000 : 0…350
0...50.000 : 0…500
0...70.000 : 0…700
0...200.000 : 0…2.000
0...400.000 : 0…4.000
Standard pressure range : in kPa
Non-standard ranges : auf Anfrage erhältlich

KS-CAN-03

CANopen Climate Transmitter

Climate transmitter KS-CAN-03 for temperature and humidity measurement, according to CAN bus specifications with a digital climate probe

Properties

Housing : Aluminium, eloxiert
Measuring element humidity : kapazitiv, betauungsfest
Measuring element temperature : Halbleiter
measuring resolution : 12 Bit
measuring grid : ab 5 ms

ElectricalConnection

CAN protocol : CANopen 2.0 A, nach ciA DS 404
Physical Layer : nach DIN 11898
Option : Bereistellung des EDS-Files

tdata.

Operating temperature : -40...+80 °C
Storage temperature : -40°C...+120°C
Minimum air velocity across the sensor required for measurement : 1,5 m/s

TK-308

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

Technical Data

Protection class socket / plug : IP 65
Protection class EN60529 cable : IP 55
Float type : 11,12, 15, 17
connection cable : 1000 mm LiYY 0,5 mm² oder Silikon 0,5 mm²
Sliding tube length : max. 6000 mm
Operating pressure : max. 6 bar
Resolution : 7,5 mm | 10 mm | 15 mm | 20 mm | 1 % | 2 % | 5 %
Accessories : R/I-Wandler TK-101

Operating temperature

PVC : max. 60 °C
PE : max. 80 °C
PP : max. 90 °C

MaterialDensity

Type 11 : 0,60 g/cm³
Type 12 : 1,00 g/cm³
Type 15 : 0,59 g/cm³
Type 17 : 0,63 g/cm³

TK-312

Evaluation unit with 0/4... 20 mA current output

The TK-312 measuring transducer converts the resistance signal supplied from a continuous level sensor into a current signal proportionate to the level.

Properties

Protection class EN60529 clamp : IP 20
Protection class EN60529 front panel housing : IP 40
Operating temperature : –20...+60 °C
nominal voltage : 24... 230 V AC/DC
Power consumption : 2 VA, 2W
Dimensions housing type B : 22,5 x 114,5 x 99
Dimensions housing type C : 22,5 x 114,5 x 114

Input

Voltage : 0...10 V
Resistance in three-wire circuit RG : 0-4...10 kW

Output

Temperature influence tolerance : max. ± 0,6 % der Signalspanne
Current output : 0/4... 20 mA bezogen auf die Masse des Eingangs
Voltage output : 0/2... 10 V
Mounting : Tragschiene nach EN 50022
Weight : 175 g

EE-2X

electrode, multiple for Ex-Zone 0 (Cat. 1)

The conductive electrodes of the EE-21/EE-22 series enable the monitoring of conductive liquids within the Ex area Zone 0 (Cat. 1).

Variants

cable connection on side : EE-21
cable connection on top : EE-22

Properties

connection : Edelstahl (1.4571)
Protection class EN60529 : IP65
Ex-protection : TÜV 02 ATEX 1796 X
Ex protection type : II 1 G Ex ia IIC T6 bzw. Ex ia IIB T6 / II ½ G Ex ia IIC T6 bzw. Ex ia IIB T6
connection thread : G1" | G1¼"
Cable entry EE-21 : Edelstahl (1.4571)
Cable entry EE-22 : Kunststoff
Rod diameter : 4 mm | 6 mm
rod length : max. 6.000 mm
Operating pressure media side : max. 40 bar
Spacer : ab Länge > 1000 mm je 1 pro 1000 mm

Material

electrode body : Edelstahl (1.4571)
Seal (head) : Viton
Seal (media side) : Viton | PTFE
Potential equalisation conductor connection : Edelstahl (1.4571)
electrode rods : Edelstahl (1.4571) | Hastelloy C | Tantal
Coating : PTFE

Operating temperature

Category 1 Class T6...T1 : 60 °C
Category 2 Class T6 : 80 °C
Category 2 Class T5 : 95 °C
Category 2 Class T4 : 130 °C (100°C)
Category 2 Class T3...T1 : 150 °C (100°C)

TK-32X

Luminous Row Displays

Luminous row displays of type series TK-320...TK-322 are used for visually displaying process states such as filling levels.

Type

TK-320 : Schaltschrankeinbaugehäuse 24 x 96 mm
TK-321 : Schaltschrankeinbaugehäuse 24 x 96 mm
TK-322 : 19” Karteneinschub 7 TE, 3 HE

Properties

Protection class EN60529 : IP 52
Operating temperature : – 20 °C...+60 °C
nominal voltage : 24 V DC...230 V AC
Input : 0(4)...20 mA | 0(2)...10 V DC | 5...10kΩ
Output : 4...20 mA | Bürde max. 500 Ω
Relay : 2 x Umschalter max. 230 V | min. 5 V | max. 3 A | min 1 mA

Display

Number of LEDs : 33 (rot/grün); 32 (TK-322)
Resolution : ca. 3,5 %
Error : ± 1 LED
connection : Schraubklemmen
connection TK-322 : Steckerleiste
Input : 0(4)...20 mA | 0(2)...10 V DC | 5...10kΩ
Output : 4...20 mA | max. load 500 Ω
Relay(2xSwitch) : max. 230 V | min. 5 V
Relay(2xSwitch) : max. 3 A | min. 1 mA

T200.F-24V

Overfill protection with 24V direct connection

Connection

Polyester junction box : PO/ET-520
Polyethylene connection head : PE/ET-521

Properties

Protection class EN60529 : IP 65
connection thread : G 1", G 1¼", G 1½", G2", G3”
Union nut : G 2¾", S 100x8
Guide tube length : max. 6 m
Operating temperature : max. 80 °C
Operating pressure : atmosphärisch
media density : ρ ≥ 0,6 g/cm³ (je nach Schwimmertyp)
Switching hysteresis : typ. 2 mm
Switching point tolerance : max. 2 mm

Power supply

nominal voltage : 24 V DC (24…300V DC)
Power consumption : ≤ 1 W

Output

Output contact : 1 potentialfreier Wechselkontakt
Switching voltage : max. 250 V AC / 30 V DC
Switching current : max. 3 A AC / 3 A DC
Switching capacity : max. 750 VA / 90 W

Optocoupler

Switching voltage : max. 30 V
Switching current : max. 100 mA
displays : Betriebs-LED grün, Funktions-LED rot
Switching delay : ca. 0,5 s Anzug/Abfall

XR Relais

Electrode relays and contact protection relays

The electrode relays are used for conductive level detection. levels. The possible applications extend areas where conductive, liquid media are to be detected, controlled to be detected, controlled or regulated. Hereby level detection (overflow / dry run) as well as minimum / maximum as well as minimum / maximum controls can be realised. The contact protection relays are universal measuring transducers, which input signals (resistance values) with "Namur" specification (DIN EN 60947). Namur" specification (DIN EN 60947) into switching signals of floating output contacts.

Protection class EN60529

clamp : IP20
Housing : IP40

Technical Data

Operating temperature : -20...+60 °C
Storage temperature : -30...+80 °C
Output contacts : potentialfrei
Switching voltage : min. 5 V | max. 250 V AC / 150 V DC
Switching current : min. 5 mA | max. 5 A AC / 5 A DC
Switching capacity : min. 300 mW | max. 100 VA / 50 W
Quiescent current : umschaltbar
Weight : ca. 250 g
CE marking : siehe Konformitätserklärung
Ex-protection/IECEx : siehe Prüfbescheinigung

KS-Serie

Sensors for temperature & humidity measurement

The KS series sensors are modular temperature and humidity measurement sensors in compact housings for use in almost any application.

Specifications

Housing shapes : Stabform | Alu- oder Polycarbonatgehäuse
measurands : Temperatur | relative Feuchte
Measuring range : -40...+80 °C | 0...100% rH
Signal output : 0...10 V oder 4…20 mA
Power supply : 12...30 V DC | 24 V DC

SG2420

Supply unit SG2420 for flow sensor

The DSM-2420 sensor can only be operated in hazardous areas with the associated SG2420 power supply unit or appropriately designed, approved Zener barriers.

Properties