Home
Cart

Cart

product added to request

Get an offer

Full name*

E-Mail*

telephone*

Company*

street*

place*

zip code*

country*

additional information

I agree that my details and data are collected and stored electronically in order to answer my enquiry.

Your cart

4 article(s) in your cart
pos.	image	product	Configure	Actions
1		EE-2X
2		TSR-CAN-03
3		TK-101
4		Aero_aH100

EE-2X configure

1 Typ

2 Elektrodenanzahl

3 Anschlussgewinde

4 Stabmaterial

5 Stabdurchmesser

6 Beschichtung

7 Stablänge

8 SIL2

Amount

additional infomation

TSR-CAN-03 configure

1 Temperaturbereich

2 Prozessanschluss

3 Messspitzenlänge

Amount

additional infomation

TK-101 configure

1 ATEX

Amount

additional infomation

EE-2X

electrode, multiple for Ex-Zone 0 (Cat. 1)

The conductive electrodes of the EE-21/EE-22 series enable the monitoring of conductive liquids within the Ex area Zone 0 (Cat. 1).

Variants

cable connection on side : EE-21
cable connection on top : EE-22

Properties

connection : Edelstahl (1.4571)
Protection class EN60529 : IP65
Ex-protection : TÜV 02 ATEX 1796 X
Ex protection type : II 1 G Ex ia IIC T6 bzw. Ex ia IIB T6 / II ½ G Ex ia IIC T6 bzw. Ex ia IIB T6
connection thread : G1" | G1¼"
Cable entry EE-21 : Edelstahl (1.4571)
Cable entry EE-22 : Kunststoff
Rod diameter : 4 mm | 6 mm
rod length : max. 6.000 mm
Operating pressure media side : max. 40 bar
Spacer : ab Länge > 1000 mm je 1 pro 1000 mm

Material

electrode body : Edelstahl (1.4571)
Seal (head) : Viton
Seal (media side) : Viton | PTFE
Potential equalisation conductor connection : Edelstahl (1.4571)
electrode rods : Edelstahl (1.4571) | Hastelloy C | Tantal
Coating : PTFE

Operating temperature

Category 1 Class T6...T1 : 60 °C
Category 2 Class T6 : 80 °C
Category 2 Class T5 : 95 °C
Category 2 Class T4 : 130 °C (100°C)
Category 2 Class T3...T1 : 150 °C (100°C)

TSR-CAN-03

CANopen transmitter for temperature measurement in media

High-quality stainless steel transmitter for precise temperature measurement in all stainless steel-compatible media

Measurement parameters

Measuring range : -40…+80 °C (optional +150°C)
deviation : ± 0,3 K (-40…+80 °C)
Measuring element : Halbleiter
measuring resolution : 10 Bit
measuring grid : ab 5 ms

ElectricalConnection

CAN protocol : CANopen 2.0 A, nach ciA DS 404
Physical Layer : nach DIN 11898
Operating voltage : 12…27 V ±20 %

Operating conditions

Operating temperature : -40...+80 °C
Storage temperature : -40°C...+120°C
Shock resistance : 30g, Dauer: 14 ms bei Raumtemperatur
Vibration resistance : 10g bei 20 bis 1000 Hz

TK-101

Measuring transducer (R/I-transducer)

The measuring transducer Tk101 and Tk101Ex are built directly into the connection boxes of our Liquid Level Measuring Instruments of type TK-30.

Properties

Operating temperature : -20...+60 °C
Storage temperature : -40...+80 °C
Ex-protection : siehe Zertifikat
CE marking : siehe Konformitätserklärung

Input

Resistance range in three-wire circuit : 4...10 kΩ
Measuring current : 0,8 mA @ RE = 4 kΩ
Measuring current : 0,33 mA bei RE = 10 kΩ
Measuring voltage : 3,3 V

Supply/Output

2-wire : 4...20 mA
Voltage(Um) : 11...28 V DC
Burden / load : 0...800 Ω |RBürde max = [(Um - Um min) / 0,02] Ω
Output signal in case of error : max. 24 mA

Fault influences

Max. Total error : ± 1 %
Temperature influence : -0,015 % / °C
Supply voltage influence : 0,025 % / V

Setting range

Full deflection : 60...105 %
Zero point adjustment : 0...25 %

Aero_aH100

Exhaust air fan with integrated dehumidification control for automatic room dehumidification

Dehumidification control, including integrated indoor and outdoor climate sensor. Controlled dehumidification takes place by comparing the indoor and outdoor climate. To support room dehumidification, a ventilation fan can be directly connected and controlled via the Aero_aH 100.

Properties