T-200.L WHG leakage detector

Leakage probes with general building authority approval

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

T200.F WHG overfill protection

Overfill protection for containers

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

EP EX leakage detector WHG

Plate Electrode as Leak Detector (conductive)

with general approval for constructions and EC-Type-Examination Certificate for Ex-zone 1(Cat. 2)

T205-0.F WHG EX overfill protection

Ex area zone 0 (category 1)

The magnetic immersion probes T20... are used to detect fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (cat. 1) is present in the gas space above the liquid and Ex zone 1 (cat. 2) is present outside the container, in the area of the junction box.

T209-0.F WHG EX overfill protection

Magnetic immersion probe overfill protection for Ex zone 0 (Cat. 1)

The magnetic immersion probes T20... are used to detect fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (cat. 1) is present in the gas space above the liquid and Ex zone 1 (cat. 2) is present outside the container, in the area of the junction box.

T204.F WHG overfill protection

with general building authority approval Z-65.11-404

EE-2XF EX WHG overfill protection

Conductive electrodes as overfill protection for Ex-Zone 0 (Cat. 1)

Conductive electrodes EE-2XF for monitoring conductive liquids within the Ex area Zone 0 (Cat. 1) for water-polluting and flammable liquids.

EF2...5 WHG overfill protection

Conductive Electrodes with general approval for constructions

Conductive electrodes type EF2...5 are approved by the “DIBt” (German Institute for Structural Engineering) as liquid level limit switches for the overfill protection of containers for storing water-endangering liquids

ELH WHG leakage detector EX

Suspension electrode as leakage probe

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

LU-1X0 4...20 mA IP 68

Compact Ultrasonic Level Sensor

The LU-150 is a short-range integrated ultrasonic level transmitter, intrinsically safe as Ex-version LU-180. This general purpose, 2 wire, 4 to 20 mA loop powered transmitter is ideal for liquids, slurries, and bulk materials in open or closed vessels to 5 m (16.4 ft).

TK-30X

Liquid Level Measuring Instruments Series

T30... continuous magnetic immersible probes are used for quasi-acquisition of the filling level in containers with liquid media.

HD-1XX IP 68 4...20 mA

Hydrostatic filling level measurement

Continuous and precise level measurement in unpressurised, open basins and tanks as well as underground applications such as shafts, wells and boreholes.

QFS-1X EX IP 68

Float switch with reed switch (mercury-free)

Inside the float, one or two reed contacts with a movable permanent magnet are inserted as a switching element.

QFS-12 IP 68

Two-Point Float-Switch

With the two-point float switch Type QFS-12 can be realized pump controls in liquid media on a simple way.

QFS-2X EX IP 68

Stainless Steel Float Switch

QFS-20 & QFS-21 float switches have stainless steel floats and one or two reed contacts.

QFSK-2X EX IP 68

Stainless steel float switch combination

Float switch combinations QFSK for level monitoring & level control with maximum and minimum contact sensor.

QFS-3X EX IP 68

Mercury-free float switch with µ-switch

KG-2XX

Capacitiv Limit Switch

Capacitive limit switches respond on approach of solid and liquid media.

NSP-X-E

Vibrating Limit Switch

The vibrating limit switch is a level limit switch for all kinds of fluids and is used in tanks, containers and pipelines.

NP-255

Level Switch - multiple 2...4 - pneumatic

very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated

NP-256

Level Switch - multiple 2...4 - pneumatic (hose)

very reliable and simple sensors for scanning liquids, in particular when used for overflow protection. liquids can be aggressive, sticky or highly contaminated

T-20X

Immersible Magnetic Probe made of PVC, PE, PPH, PTFE or stainless steel (1.4571)

Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers

EE-24 EX

Ex-Electrode-single with integrated safety barrier

When using a threshold detection electrode with integrated safety barrier, exceeding or falling below a threshold in conductive fluids in Ex-Zone 0 (category 1) can be detected.

EE-2X EX

electrode, multiple for Ex-Zone 0 (Cat. 1)

The conductive electrodes of the EE-21/EE-22 series enable the monitoring of conductive liquids within the Ex area Zone 0 (Cat. 1).

NP-25X

Pneumatic level switch

Reliable & simple probe for sensing aggressive, sticky or heavily contaminated liquids, especially suitable as overflow protection.

HE EX

Pendant electrodes – single, multiple

suitable for high tanks, wells and sewers

QFS-5x | QFS-6x EX

Teflon float switch for all kinds of liquids up to 150°C

The float of the QFS-50 and QFS-60 float switches is made of Teflon. Inside the float, one or two reed contacts with a movable permanent magnet are inserted as a switching element.

QFS-40

Built-in float level switch

The QFS-40 built-in float switch is designed for low-cost monitoring of liquids in containers.

Ex-QFS-3x EX

Mercury-free float switches with Ex approval

These float switches have a mercury-free switching system consisting of a microswitch and a ball which actuates this switch.

QFS-55 EX

Teflon float switch in rod design

The float switch combination is built with float switches of the QFS-50 and QFS-60 series. This makes it possible to control a level in a simple way.

MTA

Mechanical tank level indicator

The tank level indicator is a mechanically actuated indication operating "on the spot”. It permits a high degree of safety and flexibility thanks to separate points of measurement and indication.

W-35X

Water Level Gauge with sight glass indicator

The water level gauge is particulary suitable for all liquid media which are aggressively hot and rapidly moved in a container, but are not too much contamined.

MKL EX

Magnetic Flap Indicator

The MKL level indicator is connected by its two connections to the container to be monitored (see connection example). According to the law of interconnected containers the level in the float chamber corresponds exactly to the level in the container

ÜTA-32

Overfuelling indicator

The top-mounted tank indicator is a mechanically operated, on-the-spot indicator. The liquid level in the tank located below the indicator is determined proportionately to the filling level and is indicated. Control of the level is easily achieved through the installation of switching contacts. The switching points for level control can be steplessly adjusted, on-the-spot and at any time.

BK-3X0 bypass

Bistable change-over contact

Magnetically actuated changeover switch, which permanently changes its electrical switching state as a result of a magnetic system passing by, depending on the direction of movement.

PVS-390

PVC float with magnet insert

for actuating monostable and bistable contacts

GSB-390

Glass float with magnet insert

for actuating monostable and bistable contacts

PVG-399

PVC weight with magnet insert and eyelet for cable fixing

for actuating monostable and bistable contacts

MO

Monostable Switch

BI

Bistable Switch

PPS-390

PPH float with magnet insert

for actuating monostable and bistable contacts