Cart
product added to request
MKL configure
EE-24 configure
T207
Sondes à immersion magnétique en PPH
Magnetic immersion probes for use with highly aggressive liquid media for detecting level limits in containers
Propriétés
- raccordement : Polyesterdose | Aluminiumdose
- Classe de protection EN60529 : IP 65 Anschlussdose
- Connector plug : 3- und 6-fach
- filetage de raccordement : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
- câble de raccordement : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
- Longueur du tube coulissant : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
- Pression de fonctionnement : max. 20 bar
- Viscosité : < 100 cp
- Classe de protection EN60529 : IP 68 Führungsrohr
- Tension de commutation : max. 250 V
- Hystérésis de commutation : ca. 2...5 mm
- Plage de maintien : ca. 12 mm
- Contact function : monostabil | bistabil
Température de fonctionnement
- ltdata. : max. +60...+150 °C
- ltdata. : min. –20... –10 °C
- ltdata. : höhere oder niedrigere Temperaturen auf Anfrage
Capacité de commutation
- Contact de changement : 60 W/VA
- normalement ouvert : 100 W/VA
- Normally closed contact : 60 W/VA
Courant de commutation
- Contact de changement : max. 1 A
- Contact NO/NF : max. 2 A
Contacts
- Contact de changement : 8
- normalement ouvert : 10
- Normally closed contact : 7
MKL
Magnetic Flap Indicator
The MKL level indicator is connected by its two connections to the container to be monitored (see connection example). According to the law of interconnected containers the level in the float chamber corresponds exactly to the level in the container
Propriétés
- raccordement : Flansch ab DN 15
- Matériau : rostfreier Edelstahl, PVC, PPH, PVDF
- Matériau de la bride : Edelstahl 1.4571, C22.8
- Matériau Flotteur : Edelstahl, Titan, PVC, PPH, PVDF
- Nombre de contacts : beliebig
- Charge du contact : max 10 VA, max 230 V AC
- Longueur de l'affichage : max. 6m
Température de fonctionnement
- Joint PTFE : max. 150 °C
- Acier inoxydable : Joint Klingerit : max. 200 °C
- PVC : max. 60 °C
- PPH : max. 90 °C
- PVDF : max. 130 °C
Flotteur en acier inoxydable
- Poids : ~ 300 g
- Dimensions de l'appareil : Ø 52 x 270
- Pression de fonctionnement : 16 bar
- Densité du fluide : ρ ≥ 0,70 g/cm³
Flotteur en acier inoxydable
- Poids : ~ 320 g
- Dimensions de l'appareil : Ø 52 x 270
- Pression de fonctionnement : 40 bar
- Densité du fluide : ρ ≥ 0,75 g/cm³
Flotteur en titane
- Poids : ~ 180 g
- Dimensions de l'appareil : Ø 52 x 150
- Pression de fonctionnement : 16 / 40 bar
- Densité du fluide : ρ ≥ 0,73 g/cm³
Flotteur PVC
- Poids : ~ 331 g
- Dimensions de l'appareil : Ø 52 x 250
- Pression de fonctionnement : 6 bar
- Densité du fluide : ρ ≥ 0,8 g/cm³
Flotteur PPH
- Poids : ~ 283 g
- Dimensions de l'appareil : Ø 52 x 250
- Pression de fonctionnement : 6 bar
- Densité du fluide : ρ ≥ 0,69 g/cm³
Flotteur en PVDF
- Poids : ~ 352 g
- Dimensions de l'appareil : Ø 52 x 250
- Pression de fonctionnement : 6 bar
- Densité du fluide : ρ ≥ 0,85 g/cm³
EE-24
Ex-Electrode-single with integrated safety barrier
When using a threshold detection electrode with integrated safety barrier, exceeding or falling below a threshold in conductive fluids in Ex-Zone 0 (category 1) can be detected.
Propriétés
- filetage de raccordement : G 1/2” Standard | G 3/4” | G1”
- Câble : TPK (Standard) | SIL (Silikon) | FEP (Teflon)
- Longueur de la tige : max. 6.000 mm
- Pression de fonctionnement : max. 40 bar
Matériau
- electrode body : Edelstahl 1.4571
- Raccordement au processus : Edelstahl 1.4571
- Coating : PTFE
- electrode rod : Edelstahl 1.4571
- sur demande : Hastelloy C | Tantal
T204-0
Sonde à immersion magnétique en acier inoxydable (1.4571) comme variante de queue de câble
Pour l'utilisation avec des milieux liquides très agressifs pour la détection de valeurs limites de niveau dans des réservoirs. Convient pour les zones à risque d'explosion, zone 0 (catégorie 1).
Propriétés
- raccordement : Polyesterdose | Aluminiumdose
- Classe de protection EN60529 : IP 65 Anschlussdose
- Connector plug : 3- und 6-fach
- filetage de raccordement : G 1/8" | G 3/8" | G 1/4" | G 1/2" | G 1" | G1 1/4" | G1 1/2" | G2" | G3"
- câble de raccordement : LiYY max. 80 °C | PTFE-Litze, 0,24 mm² | Silikon max. 150 °C
- Longueur du tube coulissant : max. 1000 mm (Rohr Ø 8 mm) | 6000 mm
- Pression de fonctionnement : max. 20 bar
- Viscosité : < 100 cp
- Classe de protection EN60529 : IP 68 Führungsrohr
- Tension de commutation : max. 250 V
- Hystérésis de commutation : ca. 2...5 mm
- Plage de maintien : ca. 12 mm
- Contact function : monostabil | bistabil
Température de fonctionnement
- ltdata. : max. +60...+150 °C
- ltdata. : min. –20... –10 °C
- ltdata. : höhere oder niedrigere Temperaturen auf Anfrage
Capacité de commutation
- Contact de changement : 60 W/VA
- normalement ouvert : 100 W/VA
- Normally closed contact : 60 W/VA
Courant de commutation
- Contact de changement : max. 1 A
- Contact NO/NF : max. 2 A
Contacts
- Contact de changement : 8
- normalement ouvert : 10
- Normally closed contact : 7
Nos ingénieurs d'application vous conseillent de manière personnelle, complète et professionnelle !
Il suffit de nous contacter par téléphone ou par courrier électronique !